• Journal of the Korean Electrochemical Society
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2023

The cathode, which is one of the four major components of a lithium secondary battery, is an important component responsible for the energy density of the battery. The mixing process of active material, conductive material, and polymer binder is very essential in the commonly used wet manufacturing process of the cathode. However, in the case of mixing conditions of the cathode, since there is no systematic method, in most cases, differences in performance occur depending on the manufacturer. Therefore, LiMn₂O₄ (LMO) cathodes were prepared using a commonly used THINKY mixer and homogenizer to optimize the mixing method in the cathode slurry preparation step, and their characteristics were compared. Each mixing condition was performed at 2000 RPM and 7 min, and to determine only the difference in the mixing method during the manufacture of the cathode other experiment conditions (mixing time, material input order, etc.) were kept constant. Among the manufactured THINKY mixer LMO (TLMO) and homogenizer LMO (HLMO), HLMO has more uniform particle dispersion than TLMO, and thus shows higher adhesive strength. Also, the result of the electrochemical evaluation reveals that HLMO cathode showed improved performance with a more stable life cycle compared to TLMO. The initial discharge capacity retention rate of HLMO at 69 cycles was 88%, which is about 4.4 times higher than that of TLMO, and in the case of rate capability, HLMO exhibited a better capacity retention even at high C-rates of 10, 15, and 20 C and the capacity recovery at 1 C was higher than that of TLMO. It's postulated that the use of a homogenizer improves the characteristics of the slurry containing the active material, the conductive material, and the polymer binder creating an electrically conductive network formed by uniformly dispersing the conductive material suppressing its strong electrostatic properties thus avoiding aggregation. As a result, surface contact between the active material and the conductive material increases, electrons move more smoothly, changes in lattice volume during charging and discharging are more reversible and contact resistance between the active material and the conductive material is suppressed.

• Clinical and Experimental Pediatrics
• /
• v.52 no.10
• /
• pp.1109-1118
• /
• 2009

Purpose : Metabolic syndrome (MS), characterized by obesity and insulin resistance, elicits risk factors such as hyperlipidemia, hypertension, and glucose intolerance with additive effects on atherosclerosis, leading to cardiovascular diseases. The purposes of this study were to evaluate the prevalence of MS among overweight and obese adolescents and to investigate the impact of obesity on the cardiovascular system. Methods : In all, 684 adolescents were included in the study. Blood pressure, body mass index (BMI), fasting blood glucose, total cholesterol, triglyceride, low-density-lipoprotein (LDL)-cholesterol, high-density-lipoprotein (HDL)-cholesterol, aspartate aminotransferase (AST), alanine aminotransferase (ALT), and high-sensitive C-reactive protein (hs-CRP) were measured in the patients with a BMI of >85 percentile. Brachial-ankle pulse wave velocity (BaPWV) and ankle brachial index were measured using Vascular Profiler (VP)-1000. Results : MS was confirmed in 19.5% of the overweight and obese adolescents and 50.8% of the obese adolescents. The systolic and diastolic blood pressure, height, weight, fat mass, %fat, BMI, obesity index, and waist circumference were higher in the overweight and obese adolescents with MS. Moreover, the triglyceride, AST, ALT, and hs-CRP levels were higher, whereas HDL-cholesterol level was significantly lower in this group. The overweight and obese adolescents with MS showed shorter diastolic and systolic times, higher heart rate and BaPWV, and longer E-wave deceleration time by echocardiography. Conclusion : Overweight and obese adolescents showed characteristic MS features such as hypertension and hyperlipidemia. Thus, obese adolescents predisposed to MS should be provided early treatment for obesity.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.19-29
• /
• 2006

The first Japanese pilot-scale $CO_2$ sequestration project has been undertaken in an onshore saline aquifer, near Nagaoka in Niigata prefecture, and time-lapse well logs were carried out in observation wells to detect the arrival of injected $CO_2$ and to evaluate $CO_2$ saturation in the reservoir. $CO_2$ was injected into a thin permeable zone at the depth of 1110m at a rate of 20-40 tonnes per day. The total amount of injected $CO_2$ was 10400 tonnes, during the injection period from July 2003 to January 2005. The pilot-scale demonstration allowed an improved understanding of the $CO_2$ movement in a porous sandstone reservoir, by conducting time-lapse geophysical well logs at three observation wells. Comparison between neutron well logging before and after the insertion of fibreglass casing in observation well OB-2 showed good agreement within the target formation, and the higher concentration of shale volume in the reservoir results in a bigger difference between the two well logging results. $CO_2$ breakthrough was identified by induction, sonic, and neutron logs. By sonic logging, we confirmed P-wave velocity reduction that agreed fairly well with a laboratory measurement on drilled core samples from the Nagaoka site. We successfully matched the history changes of sonic P-wave velocity and estimated $CO_2$ saturation a(ter breakthrough in two observation wells out of three. The sonic-velocity history matching result suggested that the sweep efficiency was about 40%. Small effects of $CO_2$ saturation on resistivity resulted in small changes in induction logs when the reservoir was partially saturated. We also found that $CO_2$ saturation in the $CO_2$-bearing zone responded to suspension of $CO_2$ injection.