• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.3
• /
• pp.50-55
• /
• 2007

A large steel industry which has nonlinear loads including electric arc furnaces is one of the extra high voltage customers. These nonlinear loads generate harmonic currents and create distortions on the sinusoidal voltage of the power system. Harmonic field measurements have shown that the harmonic contents of a waveform varies with time. A cumulative propablistic approach is the most commonly used method to solve time varying harmonics. In this paper the in varying harmonics of electric arc furnace loads are evaluated by international harmonic standards(IEC 61000-3-6, IEEE 519 and JIS C 61000-3-2).

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.268-275
• /
• 1999

In this paper, a new type of linearization technique proposed, in which the predistortor was added to the feedforward linearizer. As the input power level is applied to HPA, the gain and phase characteristics of the amplifier are also varied. By using of the predistorter the amplitude imbalance and phase imbalance is kept constant. Experimental results are present for Korea PCS frequency band. The center frequency of the feedforward amplifier is 1.843.75 MHz with 1.23 MHz bandwidth. The 2-tone intermodulation distortion at 37dBm output power is about -50dBc, and spurious emission are -46dBc at $fc{\pm}\;885KHz\;and\;-52dBc\;at\;fc\;{\pm}1.98MHz$, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.259-266
• /
• 2007

The parameters of electric acoustic characteristic used as standards to evaluate the performance of a small microphone are composed of sensitivity, harmonic distortion, frequency response, directivity and others. Such characteristic parameters should be designed differently depending on a purpose, so it is important to verify whether a small microphone was made appropriately for the purpose after measuring the acoustic characteristics. Therefore, a system that can measure the acoustic characteristic parameters of a small microphone using DSP, not only simultaneously but also in real-time, was implemented in this paper. To verify the implemented system, four kinds of microphones were measured and the results were compared with the data values of the acoustic characteristics of each microphone. There were a little discrepancy between them because the conditions when measuring the characteristics were not identical. But it was verified that the errors are within the error tolerance and it proved that the system can be used in place of the conventional equipment used in measuring the acoustic characteristics of small microphones.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.61-69
• /
• 2003

Cellular network을 이용하는 휴대 단말기의 경우 TDMA(GSM, IS-136), CDMA(IS-95) 그리고 WCD-MA 등을 포함해서 년간 약 4억대 정도 생산되고 있고, PAM(Power Amplifier Module)은 단말기 한 대당 1~2개 정도 사용되며, 단말기의 battery 사용시간과 밀접한 관련이 있다. 또한 antenna front-end에 장착되기 때문에, 신호의 왜곡에 의한 인접채널 누설 전력과 harmonic 등 전기적인 규격의 적합성과 ESD, 습기 등 품질 신뢰성 문제에 직접적인 영향을 주는 중요한 부품 중의 하나이다. 이로 인하여 PAM의 핵심 기능을 담당하는 PA IC의 공정 기술과 설계 기술, PAM제조 기술 등의 향상에 대한 많은 연구와 개발이 이루어졌다. 본 고에서는 PAM의 최근 기술 동향과 기능적으로 PAM이 주변 수동 및 능동 부품과 집적화 되고 있는 복합 모듈의 동향에 대해서 기술한다.

• Electronics and Telecommunications Trends
• /
• v.19 no.5 s.89
• /
• pp.107-113
• /
• 2004

광섬유의 분산특성에 의한 신호의 왜곡을 완화하기 위한 방법의 하나로 수신단에서 전기적 등화에 의한 분산 보상법이 개발되고 있다. 이 기술은 이미 유무선 전송에 널리 사용되었으며 근래에 고속의 광 전송에도 도입되고 있다. 본 논문은 이와 관련된 기술을 소개하고자 한다. 현재까지 비교적 구현이 용이한TF(Transversal Filter)와 DFE(Decision Feedback Equalizer)에 관한 결과가 주로 발표되었다. 전송속도는 대부분이 현재 상용화된 10Gb/s이며 40Gb/s에 관한 결과도 최근 발표되었다. 등화기의 효과적인 적응 제어 방법에 관하여도 몇 가지 기술이 제시되었다. 이 기술의 대표적인 적용분야는 단일모드 광섬유의 편광모드 분산에 대한 보상이며 그 외에 다중모드 광섬유의 모드간 분산 보상에도 활용될 수 있다. 이 기술의 사용으로 전송거리의 확장에 의한 경제성 향상을 기대할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.81-88
• /
• 2004

In case of mechanical down tilting, a horizontal pattern is distorted and beam width widens whenincreasing tilt angle, which causes an expansion of hand off region and burden base station equipment. In contrast, electrical down tilting has advantage that horizontal HPBW is kept constant with down tilting. In this paper, based on a phased array technology, dual polarized base station antenna with electrical down tilting was developed at 800MHz band. The antenna has down tilting range of 0$^{\circ}$ to 14$^{\circ}$, and 15㏈i gain. We use stacked microstrip patch as a radiated element and apply balanced feed technique to improve isolation between ports and discrimination of cross polarization. The effect of electrical down tilting was verified by field test.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.19-25
• /
• 2008

In this paper, we have proposed a new market transformation policy to improve the existing rate discount program for the mid-night demand. The rate discount program for the mid-night demand is designed to relieve day-time demand and grow night-time demand since 1985. From this program, customer can save their electricity bills and at the same time electric utilities increase the load factor and utilization rate for the base-load generators such as nuclear and coal. Since this program has been introduced however, many economic problem has been brought out. This paper, therefore, has suggested new market transformations to resolve this problem, whereby economic loss can be shrink while all the interested party can minimize their individual benefits.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.21-28
• /
• 1998

A new technique for shaping the line current and reducing the total hannonic distortion in a threephase rectifier is introduced. A review of the problems inherent in a three-phase diode rectifier feeding capacitive load and the possible solutions are first presented. The proposed 3 bidirectional switches and their operation are presented. The main features of this paper are low cost, high efficiency and simplicity. A simulation and experiment results show its good action.action.

• Journal of the Korean Geophysical Society
• /
• v.2 no.2
• /
• pp.123-134
• /
• 1999

Magnetotelluric responses may be affected by strong anisotropy of the high-conductivity layers (HCL) in the upper mantle or lower crust. We have studied two-dimensional anisotropy MT modelling to examine the effect of high anisotropic media. Electrical properties of a homogeneous anisotropic body are defined by a symmetric conductivity tensor and the problem is described by coupled diffusion equation in the frequency domain. In two-dimensional anisotropic environments, diagonal elements of the impedance tensor have higher values than those in isotropic environments. In some cases, TM mode phases reach more than 90°and apparent resistivities decrease for some frequency range because of telluric distortion. GB decomposition may be used to recover regional responses, but can be affected by the regional anisotropic effect. Considering these results, BC87 dataset was interpreted with a modified anisotropic model.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.388-394
• /
• 1998

We designed and fabricated an improved null-type torque magnetometer for measuring magnetic anisotropy of magnetic materials. This torque magnetometer has a measurement range of $~{\pm}15$ dyne.cm, and the range can be controlled. Resolution is ~0.0005 dyne.cm. Noise level is less than 0.01 dyne.cm with one measurement, and less than 0.004 dyne.cm with 10 averaged measuremets. The precision is less than 0.5 %. In contrast to typical null-type torque magnetometers, we placed a small ferrite magnet in the Helmholtz coil, instead of placing coil in the permanent magnet. From this novel sturucture, we can design a geometrically isotropic and relatively light-weight sample rod. Also, we can prevent the effect of input and output lines of coil exposed in the magnetic field in torque meter. Consequently, our novel null-type torque magnetometer can have a better sensitivity, faster response time, and smaller distortion of torque curve than commercially available torque magnetometers.