• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.67-74
• /
• 2009

For the surge currents like lightning currents containing high frequency components and the abnormal currents having high frequencies which cause the EMI(Electromagnetic interference) problems for the electronic devices and communication instruments, the linear grounding electrodes have the significantly composite impedance characteristics which are dependent on the frequency of the applied current. The impedance of a grounding electrode is not lowered by expanding the dimension of the grounding electrode, and the length of grounding electrode having the minimum value of the grounding impedance for each condition of frequency and soil characteristics is existent, and it is defined as Critical length. In this paper, the critical lengths for the vertically and horizontally-buried grounding electrodes are calculated by using the distributed parameter circuit model. The propriety of the simulations has been confirmed by comparing the simulated results with the measured results.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.573-576
• /
• 2003

In these days. a lot of paper are made electronic document using the computer through the spread of computer and internet technology growing up. which is produced in construction project such as form document, report, account, specification and so on. Developed electronic document is distributed energetically through internet. Because existing electronic document is composed of various format, it is difficult that document data is shared and exchanged among the project participating groups in internet. So, it is required that construction-related technical document is made electronic document by standard information system and how to use technical document. Therefore, tins study presents the procedure and method of developing electronic document on technical document using XML technology.

• Journal of Korean Medical classics
• /
• v.19 no.3
• /
• pp.128-137
• /
• 2006

관우(關于) ${\ulcorner}$상한론(傷寒論)${\lrcorner}$ 적발어양화발어음적조문(的發於陽和發於陰的條文), 유허다부동적론쟁이의가적해석야도부일치(有許多不同的論爭而醫家的解釋也都不一致), 특별시관우음양적개념(特別是關于陰陽的槪念), 화발어음증적발열유무(和發於陰證的發熱有無), 치유시기(治愈時期), 의가적설명전각양각색이몰유일관적해석(醫家的說明全各樣各色而沒有一貫的解釋). 소이아주장료이하문제(所以我主張了以下問題), 기내용여하(其內容如下). 기일시발병부위(其一是發病部位), 발어양증시표현위기장성적정황하(發於陽證是表現衛氣壯盛的情況下) 감수외아구이병정위중적상태(感受外雅邱而病情危重的狀態). 발어음증적음지의의시표현인(發於陰證的陰之意義是表現人) 체내부적문제(體內部的問題), 저취시위기허적상태(這就是衛氣虛的狀態). 기이시발어음증적발열유무(其二是發於陰證的發熱有無), 가이추론재발어음증적상태상(可以推論在發於陰證的狀態上), 유용오하(有用誤下)오치(誤治) 적정황(的情況), 기정황취시발열증상(其情況就是發熱症狀), 소이발어음증(所以發於陰證) 초미견발열증(初未見發熱症), 단재병적진행과정상(但在病的進行過程上), 각유발열증상(却有發熱症狀). 기삼시치유시기(其三是治愈時期) 부요론칠일여륙일적시간(不要論七日與六日的時間), 단수요설명발어양적치응시기비발어음적치유시기요장(但需要說明發於陽的治應時期比發於陰的治愈時期要長). 발어양증비발어음증(發於陽證比發於陰證), 기병정위중(其病情危重), 소이수요제거아기병회복위기적시간(所以需要除去雅氣幷恢復衛氣的時間). 총지(總之) 발어양증적치유시기비발어음증적치유시기수요장(發於陽證的治愈時期比發於陰證的治愈時期需要長).

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.1
• /
• pp.41-44
• /
• 2010

We have experienced a case of comparatively rare anteromedial meniscofemoral ligament (AMMFL) in which the anterior horn of the medial meniscus was attached to the posterolateral wall of the femoral intercondylar fossa. AMMFL was diagnosed and confirmed during therapeutic arthroscopy. The report suggests the need for increased awareness of the possible presence of this. Additionally, we illustrate the anomaly, discuss its controversial clinical significance and review the literature.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.6
• /
• pp.715-723
• /
• 2001

This paper represents the behavior of CFT column to H-beam full-scale connection with external T-stiffener. 6 specimens whose T-stiffeners which are compounded of vertical element and horizontal element were made under the parameter of the strength ratio of each elements(vertical element and horizontal element in T-stiffener) to the beam full plastic moment. The analysis-parameters demonstrated in the base of the data that we get in experiment are strength stiffness, and plastic rotational capacity. All of specimen showed stable hysteretic behavior, and the horizontal element is more critical than vertical element in strength and stiffness. The mean beam plastic rotation of all specimen except the TS-2 specimen is 2.97% rad.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.233-240
• /
• 1994

We have investigated how the magneto-optical and recording properties of Pt/Co modulated films vary with sample preparation conditions : sputtering at various gas pressures, sputtering with Xe instead of Ar, and etching the buffer layers, etc. The magneto-optical characteristics of Pt/Co multilayers was comparable with those of currently prevailing rare-earth transition-metal alloys(Tb-Fe-Co amorphous films). On a disk of $12{\times}[Pt10.7\;{\AA}/Co2.8{\;}{\AA}]$ multilayer enhanced with 70nm silicon nitride, we have achieved a CNR of 36dB with a reading laser(${\lambda}\;=\;780nm$) power of 2.5-4.5mW for 720KHz carrier at 1.4m/s and the enhanced kerr rotation angle of $1.23^{\circ}$ at 780nm. It is suggested that Pt/Co modulated films clearly are very promising magneto-optical materials for a commercially use.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.120-122
• /
• 2004

평판 스위치 전극에 인가되는 전압 변화에 따라서 전극 앞에서의 플라즈마 전위의 변화를 측정하고, 이를 이용하여 형성된 전계의 변화를 관찰하였다. 대부분 스위치 전각에 인가되는 펄스는 펄스 인가시간, 플래토(plateau)시간, 펄스 회복시간으로 구성되어 이들 세 가지 시간 구간에 따라서 전위의 변화를 측정하여 형성되는 전계를 관찰하였다. 빠른 방전 스위치의 동작특성을 이해하기 위하여 스위치 전극인가 전압의 인가시간 변화와 이에 따른 전압 변화율 및 인가전압의 크기에 따른 플라즈마 쉬스의 거동을 관찰하고, 그 크기가 펄스 변화율과 크기에 따라 변화함을 찾았다. 펄스의 회복시간 동안에 돌아오는 플라즈마 쉬스의 거동은 펄스의 인가시간동안의 변화와 유사한 거동을 보였으며 이때에도 펄스 회복율이 중요한 인자임을 알 수 있었다. 만일 펄스 변화율이 커서, 전극 앞에서의 쉬스의 거동 속도가 플라즈마 이온의 음속보다 빠르게 변할 때는 이온 매트릭스 쉬스의 거동형태를 따르고, 변화율이 늦어서 쉬스의 거동 속도가 이온의 음속보다 느리게 변하는 경우에는 Child-Langmuir 쉬스의 형태가 시간에 따라 전개됨을 알 수 있었다. 펄스 특성을 정량적으로 관찰할 수 있도록 스위치 전극에 흐르는 전류의 크기를 계산하기 위해 필요한 모델을 개발하여 실험견과와의 비교를 통하여 펄스 시간동안 플라즈마의 거동이 스위치를 흐르는 전류에 미치는 영향을 연구하였다.

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.3
• /
• pp.175-179
• /
• 2010

동종 반월상 연골 이식술은 불가피하게 반월상 연골이 소실된 환자에서 증상을 호전을 위한 매우 효과적인 치료이다. 관절연골의 보호 효과 등 장기적인 결과에 대해서는 아직까지는 많은 연구가 필요한 상태이지만, 이러한 환자에서 반월상 연골의 기능을 회복시키기 대안이 많아 점차 널리 시행되는 추세이다. 이식된 반월상 연골이 제 기능을 하기 위해서는 적절한 수술방법을 통하여 반월상 연골 이식물을 정확한 위치에 이식을 하는 것은 필수적일 것이다. 여러 저자들 마다 서로 다른 다양한 반월상 연골 이식술의 방법들을 사용하고 있지만, 어떤 방법을 선택하던지 간에 이식된 반월상 연골의 전각 및 후각을 해부학적인 위치에 견고하게 고정을 하는 것이 매우 중요하다. 술자의 선호도에 따라 다양한 방법중의 하나를 선택을 할 수 있지만, 어떤 방법이든 수술 술기상의 어려움이 있으므로, 철저한 준비와 노력이 필요할 것이다. 본 종설에서는 반월상 연골 이식술 중 개방적 방법에 대한 간단한 소개와 함께 저자들이 사용하는 관절경을 이용한 수술방법을 정리하였다.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.1
• /
• pp.45-54
• /
• 2011

The results of examining the architectural features and changes of the main building of Dogapsa temple which is multi roofs wooden structure are as follows. The passage comparing 'Dogapsa' of <>, account of Lee Ha Gon's trip as the literature showing the appearance of Dogapsa temple in the early 18th century to Borimsa through verse of 'Dutacho' was noticeable. Dogapsa temple at Yeongam was distant over 100 ri from Borimsa temple at Jangheung and it was considered that there were many temples at Mt. Wolchul, Yeongam and there were also many temples to be comparable with it. But, Dogapsa temple was compared to Borimsa temple because verses 'many-storied building is high and immense' of 'Dogapsa' at <> and 'Dogapsa is lower than Borimsa at Jangheung' at 'Dutacho' of <> were interpreted as the existence of multi roofs Buddhist temple which had something in common with Dogapsa and Borimsa and was comparable to them. According to existing materials, it was assumed that the main building of Dogapsa was burnt through the Japanese invasion of Korea in the 52nd year of the sexagenary cycle (Eulmyooebyeon, 1555) and Jungyujaeran (1597), but record of major history of the main buildings of Dogapsa and Borimsa indicated that multi roofs wooden structure of the two temples were built at the same period. Since multi roofs wooden structure of main building of Borimsa was rebuilt in 1692, these buildings existed from the early 18th century to middle 18th century.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.223-231
• /
• 2006

This study deals with behavior characteristics of laminated composite folded structures according to ratio of folded length based on a higher-order shear deformation theory. Well-known mixed finite element method using Lagrangian and Hermite shape interpolation functions is a little complex and have some difficulties applying to a triangular element. However, a higher-order shear deformation theory using only Lagrangian shape interpolation functions avoids those problems. In this paper, a drilling degree of freedom is appended for more accurate analysis and computational simplicity of folded plates. There are ten degrees of freedom per node, and four nodes per element. Journal on folded plates for effects of length variations is not expressed. Many results in this study are carried out according to ratio of folded length. The rational design is possible through analyses of complex and unpredictable laminated composite folded structures.