• The Journal of the Korea Contents Association
• /
• v.8 no.4
• /
• pp.79-85
• /
• 2008

These days, orthogonal frequency division multiplexing (OFDM) transmission method is widely used for broadband communication systems. The OFDM, which uses sine waves as orthogonal basis functions, is one of the orthogonal waveform modulation techniques. In this paper, we investigate a wavelet packet modulation method which uses wavelet packets instead of sine waves as the basis functions. The wavelet packets may have different patterns in two dimensional time-frequency domain, and we can design the packets appropriate for the channel environments with much flexibility. In this paper, we investigate the characteristics of the wavelet packet modulation as one of the multicarrier modulation methods, And we illustrate by simulations that narrowband interference can be reduced effectively by control the bandwidth of the wavelet packets.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.461-466
• /
• 2015

Atomic force microscopy (AFM) is powerful tool for determining properties of samples based on interactions between the sample surface and an approaching probe tip. In this study, we modeled the interactions between the sample and the tip of the AFM microcantilever as a single nonlinear spring with an equivalent stiffness element and simulated the dynamic behaviors of the AFM microcantilevers using the finite element method (FEM) and ANSYS software. With the simulation results, we analyzed the complex dynamic responses of the AFM cantilever using proper orthogonal decomposition (POD). In addition, we compared the simulation and experimental results using the same method. Consequently, we suggest an effective method to express the interaction between the tip and sample, and we confirm that the influence of the higher order model due to the interaction between the tip and sample is increased.

• Journal of computational fluids engineering
• /
• v.22 no.1
• /
• pp.59-66
• /
• 2017

The guideline of selecting the number of snapshot dataset, $N_s$ in proper orthogonal decomposition(POD) was presented via the analysis of Eigen values based on the singular value decomposition(SVD). In POD, snapshot datasets from the solutions of Euler or Navier-Stokes equations are utilized to SVD and a reduced order model(ROM) is constructed as the combination of Eigen vectors. The ROM is subsequently applied to reconstruct the flowfield data with new set of flow conditions, thereby enhancing the computational efficiency. The overall computational efficiency and accuracy of POD is dependent on the number of snapshot dataset; however, there is no reliable guideline of determining $N_s$. In order to resolve this problem, the order of maximum to minimum Eigen value ratio, O(R) from SVD was analyzed and presented for the decision of $N_s$; in case of steady flow, $N_s$ should be determined to make O(R) be $10^9$. For unsteady flow, $N_s$ should be increased to make O(R) be $10^{11\sim12}$. This strategy of selecting the snapshot dataset was applied to two dimensional NACA0012 airfoil and vortex flow problems including steady and unsteady cases and the numerical accuracies according to $N_s$ and O(R) were discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2409-2417
• /
• 1994

The ODR(orthogonal double-rotation) digital lattice filters have desirable properties for VLSI implementation such as local connection, regularity and pipelinability. These filters are also known to exhibit good numerical behavior for finite precision implementation. Although these filters can be pipelined by the cut-set localization procedure, it should be noted that the maximum sample rate obtained by this technique is limited by the feedback computations. In this paper, a pipelining method for the ODR digital lattice filter is proposed, by which the sample rate can be increased at any desired level. it is also shown that the low-power CMOS digital implementation of ODR digital lattice filters can be done successfully using our pipelining method. The pipelining method is based on the properties of the Schur algoithm, constrained filter design methods, and the polyphase decomposition technique.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.482-493
• /
• 2016

The identification of modal damping of a segmented hull model with torsional response is difficult task due to the coupling of modal response. This is because the 1st and 2nd torsional vibration modes are closely spaced in frequency domain leading to the situation that the modal decomposition is difficult to achieve by simple band-pass filter. Present study applied several different modal decomposition methods to derive the damping ratio of different modes. The modal decomposition methods considered in this study are simple band-pass filter, Hilbert vibration decomposition, Wavelet transform and proper orthogonal decomposition. Coupled free decay signal obtained from the torsional hammering test on a segmented hull model was processed with four different methods and the derived damping ratios were compared with each other. Discussions also have been made on the pros and cons of the different methodologies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.512-522
• /
• 2005

In this paper, an optimal determination method of the subband-frame size and mode-switching level is proposed for adaptive OFDM-TDD systems in frequency-selective time-varying channels. The optimization problem considering frequency selectivity. user's mobility, and the signaling overhead caused by the mode change information is formulated in the maximum spectral efficiency sense satisfying the target BER. Assuming that subband-frame size is given, the mode-switching level is first optimized so that the spectral efficiency can be maximized satisfying the target BER. The subband-frame size among candidates is then determined, which maximizes the spectral efficiency. Simulation results show that the proposed scheme outperforms conventional schemes, in terms of the spectral efficiency and the BER.

• Journal of the Korean Society of Visualization
• /
• v.3 no.2
• /
• pp.57-62
• /
• 2005

The flow characteristics in a confined slot jet impinging on a flat plate were investigated by using cinematic Particle Image Velocimetry technique. The jet Reynolds number was varied from 250 to 1000 for a fixed jet-to-plate spacing of H/W=5. We found that the vortical structures in the shear layer are developed with increase of Reynolds number and that the jet becomes unsteady by the interaction of vortex pairs between 500 and 750 of Reynolds number. Vortical structures and their temporal evolution are verified by using proper orthogonal decomposition.

• 한국가시화정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.97-100
• /
• 2007

A new evaluation method for the performance tests of the frozen air in a refrigerator using PIV(Particle Imaging Velocimetry) and POD(Proper Orthogonal Decomposition) techniques is introduced. A two-door refrigerator model was tested for the experiments. Actual temperature measurements were carried out for the drawer No.4 in refrigerator. By evaluating the characteristics of the interior flow of the refrigerator, an optimal shape of the drawer could be suggested through the PIV evaluation test. In this research, in order to find influences the turbulent kinetic energy contribution associated with the dynamic structures, we executed a POD analysis using the method of snapshots and the instantaneous fluctuating velocity field.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.12
• /
• pp.1679-1689
• /
• 1997

In this paper, a precise description is given to the basic theory as well as the detailed algorithms for the numerical treatment of the method of POD (proper orthogonal decomposition). This method is then applied to analysing the numerical solutions of one-dimensional shallow-water equations to show how the method is affected by various parameters such as the sampling time, sampling numbers, and the spatial resolution for the autocorrelation function. A few curious features associated with this flow model found through the analysis are further explained and discussed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.961-964
• /
• 2001

본 논문에서는 영상에 쌍직교 웨이블릿 변환(BOWT:Biorthogonal Wavelet Transform)을 사용하여 인간 시각 시스템(Human Visual System)에 덜 민감한 고주파 영역에 워터마크를 삽입한다. 추출 시 워터마크가 삽입된 영상과 워터마크와의 계층적 상관관계(Hierarchical Correlation)를 구하여 임계값 이상이면 영상에 대하여 저작권을 주장할 수 있다. 본 논문에서 사용한 워터마크는 seed값을 갖는 정규분포로부터 무작위로 생성된 실수열의 집합이다. 바코드(Bar-Code)를 워터마크(Watermark)로 사용하므로써 저작권 보호뿐 아니라 바코드가 가지고 있는 바코드 체계를 이용하여 멀티미디어의 컨텐츠를 자동관리 하는데 적합하다.