• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.215-225
• /
• 2016

This study seeks to find an alternative to the requirement for proving the competitiveness of Korean performing arts before entering into the overseas market by deriving the factors causing entry into the market to be delayed based on an analysis of the current status. Between 2007 to 2014, the overseas revenues from Korean performing arts increased by 16.4% compared to the total amount of financial support, as the number of free performances given overseas and the average guaranteed number of performances overseas are both at a standstill. Also, the size of the audience increased by a mere 3.3 times, which is an even lower growth rate than that for the number of performances, 3.8 times, during the same period. Furthermore, the audience size per unit is suffering from long-term stagnation. The main causes are as follows: 1) applying one-dimensional methods to performing arts exchanges and expanding the overseas market, 2) the existing confused concepts between profit and non-profit contents, 3) the weaknesses of the market expansion strategy, because of programming practices focusing on providers, such as presenters and producers, rather than consumers. As a result, the necessary basic research, including consumer surveys, has not been done yet. In order to understand the implications of this analysis and solve the problem of the delayed overseas expansion of Korean performing arts, the Korean wave industry was examined as a representative example. Consumer surveys for the performing arts, possibly benchmarked to the "Korean Wave Consumer Survey Index (KWCSI)", are expected to be done in the near future. In addition, through the development of a specific consumer index of the performing arts, customized marketing strategies by continent and country need to be established. This empirical study of the overseas expansion of performing arts can be utilized as a bridge between the academic and real worlds. This work may also enable a variety of strategies to be established for the overseas expansion of the performing arts.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.557-566
• /
• 2005

In preparation of steamed foam-cakes, effects of whipping time, amount of wheat flour, and amounts of emulsifier on physical properties of the steamed foam cakes were investigated using RSM (response surface methodology). The three independent variables selected for the RSM experiment were whipping time $(X_1)$, amount of wheat flour $(X_2)$, and amounts of wheat flour $(X_2)$, and concentration of emulsifier $(X_3)$ were set for single-stage mixing, respectively. A rotatable central composite design was used for treatment arrangement. The responses from the product for loaf volume, color values and textural properties were analysed. In the analysis of variance for the foam cakes prepared by single-stage method, significant interactions were observed between independent variables (experimental factors) and physical property like loaf volume (p<0.05); textural properties like hardness, gumminess, and chewiness (p<0.05). Among independent variables, concentration of emulsifier had the most effects on physical properties while whipping time. The ordinary points in surface response showed maximal points with physical property like colorimetric b value while other properties revealed saddle points. The 3-dimensional response surface graphs of the predicted regression models displayed decreasing loaf volumes with increasing whipping times and emulsifier concentrations beyond optimum levels. The optimum conditions for best loaf volume and textural property (hardness, gummimess and chewiness) of the products selected by extracting intersectional areas of the contour maps that commonly overlapped all characteristics were; $11\~13$ min whipping time, $470\~486\;g$ amount of wheat flour, and $19\~20\;g$ emulsifier concentration, in case of single-stage method. The median values extracted from the RSM experimental results for optimum manufacturing conditions for single-stage method, i.e., 12 min whipping time, 478 g amount of wheat flour, and 20 g emulsifier concentration were empirically proven to fit the predicted levels of physical properties from the final foam cakes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.6
• /
• pp.773-778
• /
• 2007

This study was performed to develop a more simple and convenient heat treatment process for increasing heating temperature than the traditional 9-times steaming process for Rehmanniae radix Preparata (R. radix P.). The R. radix was heated to various temperatures (110, 120, 130, 140 and $150^{\circ}C$) for different lengths of time (1, 2, 3, 4 and 5 hr). Chromaticity, free sugar, amino acid, catalpol and 5-HMF (5-hydroxy-methyl-2-furaldehyde) content of water extracts of R. radix P. were analysed. With increasing heating temperature and time, the L, a and b-value of samples gradually decreased. Fructose and glucose contents were increased to $120^{\circ}C$ for 5 hr (5.21 and 6.67%, respectively) with no changes afterward. Sucrose content was not detected after $130^{\circ}C$. Total amino acid was increased to $140^{\circ}C$ and decreased afterward. The maximum total amino acid content was 4,172 mg/100 g at $140^{\circ}C$ for 2 hr (R. radix L.: 3,029 mg/100 g). The catalpol was decreased to $130^{\circ}C$ for 1 hr and not detected afterward. The 5-HMF content increased with increasing heating temperature and time. The maximum content of 5.HMF was 2.5% in $150^{\circ}C$ for 5 hr. Hence, it can be suggested that the heat treatment at $130^{\circ}C$ for 2 hr or more is the most optimum processing conditions, instead of the traditional 9.times steaming process.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.492-501
• /
• 2007

Coastal disasters have become one of the most important issues in every coastal country. In Korea, coastal disasters such as storm surge, sea level rise and extreme weather have placed many coastal regions in danger of being exposed or damaged during subsequent storms and gradual shoreline retreat. A storm surge is an onshore gush of water associated with a tow pressure weather system, typically in typhoon season. However, it is very difficult to predict storm surge height and inundation due to the irregularity of the course and intensity of a typhoon. To provide a new scheme of typhoon damage prediction model, the scenario which changes the central pressure, the maximum wind radius, the track and the proceeding speed by corresponding previous typhoon database, was composed. The virtual typhoon scenario database was constructed with individual scenario simulation and evaluation, in which it extracted the result from the scenario database of information of the hereafter typhoon and information due to climate change. This virtual typhoon scenario database will apply damage prediction information about a typhoon. This study performed construction and analysis of the simulation system with the storm surge/coastal inundation model at Masan coastal areas, and applied method for predicting using the scenario of the storm surge.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.4
• /
• pp.218-227
• /
• 2015

A prerequisite for precise quantification of nanomaterials contained in environmental samples is to prepare suitable preservation conditions of samples. This study was initiated to suggest preservation conditions of aqueous samples for analyses of metal nanomaterials. Variation in the size of silver nanomaterial (cit-AgNP) was observed according to change in various conditions, such as pH, electrolyte concentration, temperature, nanomaterial concentration, and time. Aggregation of AgNP was characterized for each environmental condition, and finally proper preservation conditions of samples were proposed based on experimental results on AgNP aggregation. In addition, the preservation period of sample was computed by the doublet time of AgNP. The results indicate that the aggregation rate of cit-AgNP was close to 0 at the conditions of pH of ${\geq}7$, electrolyte ($Ca(NO_3)_2$) concentration of ${\leq}3mM$, temperature of $4^{\circ}C$, and cit-AgNP concentration of ${\leq}2mg/L$. Furthermore, the experimental results on doublet time of cit-AgNP suggest that maximum preservation period was evaluated to be 15.79~17.53 days when the concentration of 100 nm cit-AgNP is assumed to be $1{\mu}g/L$ which is considered as an environmentally-relevant concentration of engineered nanomaterials. Our results suggest that samples should be preserved at $4^{\circ}C$ and analyzed within 2 weeks.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.271-279
• /
• 2012

Total twenty cultivars of potato (Solanum tuberosum L.) were grown at Gangneung where is located in low land of Korea. Their tubers were harvested from 100 to 120 days after planting, and over 150 g of tubers were selected for quality evaluation. Dry matter, starch, amylose in starch, ascorbic acid, protein, individual sugars and mineral were analyzed and mealiness of cooked potatoes were also evaluated by panel test. Dry mater content was the highest in 'Haryeong', 'Jayoung' and 'Shepody', and the biggest starch granules were observed in 'Jayoung' and 'Sinnamjak'. In addition, the content of amylose was highest in 'Haryeong', 'Chudong' and 'Goun'. Mineral content showed the slight difference between cultivars, but it's tendency was not clear. Vitamin C content was highest in 'Jayoung' as 62.5 $mg{\cdot}100g^{-1}$ FW, and 'Chugang' exhibited the highest content of protein. Sugar content was lower in cultivars for single one than double cropping. The lowest sugar content was observed in 'Atlantic' and 'Namseo' among cultivars for single cropping, and in 'Goun' for double cropping. As a result of analysis for quality factors, we could select nine cultivars ('Atlantic', 'Gahwang', 'Gawon', 'Goun', 'Hareong', 'Irish Cobbler', 'Jasim', 'Jayoung' and 'Shepody') with high dry matter content and low reducing sugar as a cultivar group for processing. Additionally, seven cultivars ('Chugang', 'Gawon', 'Goun', 'Hareong', 'Irish Cobbler', 'Jasim' and 'Seohong') with high mealiness and amylose content and five cultivars ('Atlantic', 'Chudong', 'Gahwang', 'Jopung' and 'Jowon') with low mealiness and amylose content were classified as groups for boiled or steam cooking and for soup or pot dishes, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.3
• /
• pp.178-188
• /
• 2002

Constructed wetlands typically cost less to build and operate, and require less energy than standard mechanical treatment technology but they have similar performance to centralized wastewater treatment plants. Therefore, they were constructed especially many in rural areas, where are small villages but not industries. Plantless column tests were performed to investigate the possibility on using zeolite as a filter medium of constructed wetland for the wastewater treatment. Removal efficiency was $COD_{Cr}$ 94.63% T-P 41.41% and $NH_4^+-N$ 99.75% at hydraulic load 314 $L/m^2{\cdot}d$ and filtering height 100 cm filled with a zeolite mixture. This zeolite mixture consisted of 1 : 1 by volume of zeolites in the diameter range of 0.5 to 1 mm and 1 to 3 mm. Accordingly, hydraulic load 314 $L/m^2{\cdot}d$ was considered as optimal. Three zeolite mixtures were used to determine the optimal mixing ratio by volume of a zeolite (A) in the diameter range of 0.5 to 1 mm to a zeolite (B) in the diameter range of 1 to 3 mm 1 : 3, 1 : 1 and only B in A to B by volume were tested at hydraulic load 314 $L/m^2{\cdot}d$ and filtering height 100 cm $COD_{Cr}$ removal efficiency was more than 89% at mixing ratios of 1 : 3 and 1 : 1 in A to B. That of T-P ranged 56.42 to 58.72% and, that of T-N and $NH_4^+-N$ was 87% and 99% regardless of mixing ratios of two zeolites. Removal efficiency was lower at the column filled with only B. Removal efficiency was better at Inter medium filled with mixing ratio 1 : 1 in A to B than with the other mixing ratios. Thus, it was found that the mixture of mixing ratio 1 : 1 in A to B was appropriate far Inter medium of constructed wetland Removal efficiency was higher in down-flow than in up-flow, and all contaminants were removed most in 20 cm filter height near feeding area.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.91-99
• /
• 1995

One of alternative conventional technologies used for treatment of livestock wastes is composting process, and recently some mechanical composting processes are being practiced. It is, however, recognized the composting process also has its own limitations such as longer time requirement, and difficulties to estimate the degree of decomposition, etc. The incomplete compost contains potentially harmful materials to crops and public health due to instabilized organic contents and pathogenic organisms. The purpose of this investigation is to develop an innovative system whereby anxious livestock wastes are thoroughly stabilized and disinfected. Thus the overall management scheme should meet the following requirements. 1. A system should be in a cost-effective and environmentally sound manner. 2. Sludges must be chemically stabilized and bacteriologically safe. 3. Odor-free by product should be applied to crop land. 4. Sludges are sources of fertilizer nutrients and/or soil amendments to enhance crop production. 5. And they can be used as potential pH adjusting agent of the acidified soils. Overall effectiveness of the developed system is experimentally tested to satisfy the preset criteria and requirements. Major experiments are divided into four categories: they are 1. chemical stability test, 2. optimal condition test of stabilization process, 3. bacteriological examination and disinfection tests, and 4. deodorization tests The stabilization process is consisted of the stabilizing reaction process and the drying process. Stabilized wastes is dried by both sun dryer and rotary dryer. It is shown that an additive dosage of about g/kg solid in wastes with a minimum of 5-minutes reaction would be necessary for effective stabilization reaction. The stabilization process is consisted of the stabilizing reaction process and drying process. Stabilized wastes are dried by both sun dryer and rotary dryer. It is shown that an additive dosage of about 300g/kg solid in wastes with a minimum of 5-minutes reaction would be necessary for effective stabilization reaction. In the stabilization reaction process, the pH of wastes is lowered from initial values of 12.3 to 8.6. High pH prevents odor production and kills pathogenic organisms. Organic matter contents in the stabilized wastes are about 50% and the sum of contents of fertilizer elements such as total nitrogen, $P_2O_5$ and $K_2O$ are about 5.3%. The livestock wastes that are stabilized chemically and hygienically can be used as a good soil conditioner and/or organic fertilizer.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.393-408
• /
• 2005

We developed and compared two automatic algorithms for moving object detections in the YSTAR-NEOPAT sky survey program. One method, called starlist comparison method, is to identify moving object candidates by comparing the photometry data tables from successive images. Another method, called image subtraction method, is to identify the candidates by subtracting one image from another which isolates sources moving against background stars. The efficiency and accuracy of these algorithms have been tested using actual survey data from the YSTAR-NEOPAT telescope system. For the detected candidates, we performed eyeball inspection of animated images to confirm validity of asteroid detections. Main conclusions include followings. First, the optical distortion in the YSTAR-NEOPAT wide-field images can be properly corrected by comparison with USNO-B1.0 catalog and the astrometric accuracy can be preserved at around 1.5 arcsec. Secondly, image subtraction provides more robust and accurate detection of moving objects. For two different thresholds of 2.0 and $4.0\sigma$, image subtraction method uncovered 34 and 12 candidates and most of them are confirmed to be real. Starlist comparison method detected many more candidates, 60 and 6 for each threshold level, but nearly half of them turned out to be false detections.

• Korean Journal of Poultry Science
• /
• v.44 no.3
• /
• pp.189-198
• /
• 2017

This study was conducted to develop a new synthetic breed of Korean native chicken. The combining ability and reciprocal effects for production traits were estimated on 1,157 hens from a $5{\times}5$ diallel cross-mating design using grand parent stock (GPS) lines of Korean native chicken. Body weight, viability, age at first egg laying, egg weight, and hen-day egg production were measured and analyzed. The results showed that the general combining ability (GCA) of the survival rate during laying periods was -9.6 to 11.1, with the highest value obtained in the W strain. Additionally, the GCA of the body weight at 12 weeks was -209.7 to 162.2, with the highest value obtained in the F strain. The GCA for age at fist egg laying was estimated to be -2.8 to 3.7, while the GCA of egg weight was -0.91 to 0.96, and the GCA of hen-day egg production was -4.9 to 6.0. In the estimation of specific combining ability, the YW combination showed the highest survival rate, FW showed the highest body weight at 12 weeks, and GW showed the highest hen-day egg production. The reciprocal effects were significantly different among crosses for almost all productivity traits. In identical breeding combinations, differences in ability were observed when the maternal or paternal breeds were switched. The mean value based on combining ability was higher in WY, WF, and GW combinations for survival rate; GF, HG, and HF combinations for body weight at 12 weeks; and GW, YW, and FW combinations for hen-day egg production. It is concluded that the GF and HF combinations, which have excellent growth performance and moderate survival rate, are the most desirable paternal parent stock (PS) strains, and the GW and FW combinations, which have great laying performance and moderate body weight, are the most desirable maternal PS strains.