• The Korean Journal of Pesticide Science
• /
• v.20 no.4
• /
• pp.319-325
• /
• 2016

This study was conducted to investigate residual organochlorine pesticides in green house soil and oriental melon, green pepper, and lettuce. The majority of them were designated as persistent organic pollutants (POPs) by the international community at the Stockholm Convention on Persistent Organic Pollutant. Extraction and clean-up method were developed using the QuEChERS method for residual organochlorine pesticides (OCPs) in soil and oriental melon, green pepper and lettuce. Recovery of OCPs in greenhouse soil and oriental melon, green pepper, and lettuce ranged from 73.3-110.6%. Limit of detection (LOD) of OCPs in soil and 3 crops were 0.01-0.08 and $0.11-0.17{\mu}g/kg$. The residues of OCPs in oriental melon, green pepper and lettuce greenhouse soil were analyzed by the developed method, and dieldrin, ${\beta}-endosulfan$ and endosulfan sulfate were detected at 1.4-72.5, 0.1-78.7 and $0.0-214.1{\mu}g/kg$, respectively. The detection frequency of 3 compounds in soils were 52 (29.7%), 34 (19.4%) and 57 (32.6%) among 175 samples, respectively. However, these compounds were not detected in all crop samples. The residue level in 3 crops were lower than 1/58.8 of maximum residue level of them. These results showed that the OCPs residue in oriental melon, green pepper, and lettuce greenhouse soil were not as high as crop safety threatening.

• Science of Emotion and Sensibility
• /
• v.18 no.4
• /
• pp.25-34
• /
• 2015

TThis study explored the requirement of fabric sensor that can measure the motion of the joint effectively by measuring and analyzing the variation in electric resistance of a sensor in accordance with bending and stretching motion of the arm by the implementation of a motion sensor utilizing conductive fabric. For this purpose, on both sides of two kinds of knitted fabric, namely 'L' fabric and 'W' fabric Single Wall Carbon Nano-Tube(SWCNT) was coated, fabric sensor was developed by finishing them in a variety of ways, and the sensor was attached to the arm band. The fabric sensor consisted of total 48 cases, namely background fabric for coating, the method of sensor attachment, the number of layer of sensors, the length of sensor, and the width of sensor. The performance of fabric motion sensors in terms of a dummy arm, that is, a Con-Trex MJ with 48 arm bands around it was evaluated. For each arm band, a total of 48, fastened around the dummy arm, it was adjusted to repeat the bending and stretching at the frequency : 0.5Hz, ROM : $20^{\circ}{\sim}120^{\circ}$, the voltage was recorded for each case after conducting three sets of repeat measurement for a total of 48 cases. As a result of the experiment, and as a consequences of the evaluation and analysis of the voltage based on the uniformity of the base line of the peak-to-peak voltage(Vp-p), the uniformity of Vp-p within the same set, and the uniformity of the Vp-p among three sets, the fabric sensors that have been configured in SWCNT coated 'L' fabric / welding / two layers / $50{\times}5mm$, $50{\times}10mm$, $100{\times}10mm$, and SWCNT coated 'W' fabric / welding / two layers / $50{\times}10mm$ exhibited the most uniform and stable signal value within 5% of the total variation rate. Through all these results of the experiment, it was confirmed that SWCNT coated fabric was suitable for a sensor that can measure the human limb operation when it was implemented as a fabric sensor in a variety of forms, and the optimal sensor types were identified.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.4
• /
• pp.420-430
• /
• 2005

This study was performed to change the hydrophilic $NH_4Y$-zeolite to the hydrophobic one for removal of VOCs by removing the $Al^{3+}$ in the zeolite-structure to increase the Si/Al ratio, for which the three pelleted $NH_4Y$-zeolite samples were contacted separately with the steam of $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$, respectively, in a stainless steel column for 4 hours. Then extraction of the ex-structure aluminum of the hydrolyzed zeolites with the nitric acids of 0.25, 0.50, 0.75, and 0.10 M at $90^{\circ}C$ in 500 mL-flasks, respectively, according to steam temperature were followed. XRD analysises of the dealuminated zeolites showed that the peaks of the zeolites that had been hydrolyzed with the steams of both $500^{\circ}C$ and $600^{\circ}C$ are distorted more with the increase of the concentration of nitric acid used for extraction of the ex-structure aluminums, however, those hydrolyzed with steam of $400^{\circ}C$ became amorphous phase when treated with the all nitric acids of four concentrations. Also the EDX analysises showed that the BET surface areas and TPVS of the zeolites that had been hydrolyzed with the steam of $600^{\circ}C$ were increased with the concentration of the nitric acid when the nitric acids of 0.25 M and 0.5 M had been used but decreased when the nitric acids of 0.75 M and 1.0 M had been used. These results led to the conclusion that both the $600^{\circ}C$ and $500^{\circ}C$-steam and the 0.5 M-nitric acid are appropriate to change the hydrophilic $NH_4Y$-zeolites to the hydrophobic one, which were proven by the measurement of the benzene and tolune-adsorbing capacities showing the same trend as the BET surface area and TPV The Si/Al ratios and water-adsorbing capacities of the dealuminated zeolites were increased and decreased, respectively, with the concentration of the nitric acids so that it showed that the hydrophobicity is increased.

• Journal of Distribution Research
• /
• v.13 no.1
• /
• pp.1-33
• /
• 2008

As the interest in the business-to-business(B2B) electronic commerce is increasing, many companies are participating in the B2B e-Marketplaces. The e-Marketplace is defined as the virtual market that many players take part in to transact. The e-Marketplace has an influenced on the manner in which organizational buyers and sellers interact. As a result, it is important to develop an understanding of the behaviors of firms that use these electronic marketplaces. The purpose of this study is to develop a comprehensive model for trust and commitment of B2B e-Marketplace and empirically to examine their structural relationships. Drawing from trust and commitment theory in the interorganizational relationship and B2B electronic commerce context, this study identifies network externality, interactivity, justice, quality of information sharing, institutional assurance as the determinants of trust and commitment of e-Marketplace. The proposed model hypothesized that (1) trust is a function of network externality, interactivity, justice, quality of information sharing, institutional assurance, (2) attitudinal and behavioral commitment is a function of trust, (3) behavioral commitment is a function of attitudinal commitment. The proposed model is tested using organizational-level survey data from 187 buying organizations that conduct business in MRO e-Marketplaces. The data were tested by reliability test, correlation analysis, exploratory factor analysis, confirmatory factor analysis and covariance structure analysis. The results indicate that (1) trust is influenced by network externality, interactivity, justice, institutional assurance, (2) attitudinal commitment and behavioral commitment is influenced by trust (3) behavioral commitment is influenced by attitudinal commitment. Also, the empirical results confirmed that trust play a strong, central role in determinging e-Marketplace commitment. The key theoretical contribution of this research is that it begins to extend interorganizational information system literature in areas such as B2B Internet e-Marketplace. Managerially, this study contributes tn the understanding of the role of B2B e-Markeplace providers in Internet situation. And Limitations of this study and guidelines for future researches are also discussed.

• Journal of Nutrition and Health
• /
• v.42 no.5
• /
• pp.486-495
• /
• 2009

The purpose of this study was to analyze the performance evaluation index for a salt reduction project. Questionnaires were developed in order to investigate salt reduction programs nationwide. The evaluation index and programs were analyzed through the case study of a salt reduction program in public health centers. The validity of the salt reduction program's evaluation index was determined based on study of the Delphi survey and on discussion with nutrition and health care professionals. The Delphi survey showed that daily salt intake was the most valid nutritional evaluation index. Stroke mortality and stomach cancer mortality were good health care evaluation indexes. The method for measuring salt intake that had the greatest validity was a 24-hour urine collection. However, 24-hour urine collection had the lowest score for ease of performance. The combined scores of validity and ease of performance showed that the survey method for dietary attitude and dietary behavior, dietary frequency analysis (DFQ 15), and a salty taste assessment, in that order, were proper methods. The high reliability of the salty taste assessment indicated that the percentage of the population that exhibits proper salt intake (2,000 mg sodium or less daily) and the percentage of the population that consumes low-salt diets as nutritional evaluation indexes also will be helpful to evaluate performance of salt reduction programs.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.419-425
• /
• 2007

The aim of this study was to evaluate the radiopacity and cytotoxicity of three resin-based (AH 26, EZ fill and AD Seal), a zinc oxide-eugenol-based (ZOB Seal), and a calcium hydroxide-based (Sealapex) root canal sealers. Specimens, 10 mm in diameter and 1 mm in thickness, were radiographed simultaneously with an aluminum step wedge using occlusal films, according to ISO 6876/2001 standards. Radiographs were digitized, and the radiopacity of sealers was compared to the different thicknesses of the aluminum step wedge, using the Scion image software. Using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, the cytotoxicity of each material was determined in immortalized human periodontal ligament (IPDL) cells. The results demonstrated that EZ fill was the most radiopaque sealer, while Sealapex was the least radiopaque (p < 0.05). AH 26, AD Seal and ZOB Seal presented intermediate radiopacity values. All the materials evaluated, except for Sealapex, presented the minimum radiopacity required by ISO standards. The cell viabilities of resin-based root canal sealers were statistically higher than that of other type of root canal sealers through the all experimental time. Further, EZ fill showed statistically lower cell viability in 24 and 48 hours compared to AD Seal and in 72 hours compared to all other resin-based root canal sealers. However, there was no correlation between the radiopacity and cytotoxicity of three resin-based root canals sealers (p > 0.05). These results indicate that resin-based root canal sealer is more biocompatible and has advantage in terms of radiopacity.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.4
• /
• pp.286-294
• /
• 2014

The purpose of this study is to investigate the effects of applying density current generator (hereafter referred to as DCG to large lakes on the operating conditions of DCG, de-stratification, water quality improvement and inhibition of algae occurrence. As a result of a survey conducted to derive the optimum operating parameters of DCG in a condition to minimize eco-toxicity, the following conclusions were obtained. During the survey period, a marked stratification appeared in September to October 2011 and May 2012. At this time, the average depth of water to form thermocline was found to be $5{\pm}2$ m, so the location of discharge port for the operation of DCG was determined to be about 5 m below from the surface. To minimize the adverse effects of benthos and obtain the effect of water mixture at the time of water circulation, the mixing ratio of surface water and deep water was designed to be 3:1 by means of ecotoxicological assessment on the DCG operating characteristics. To select the appropriate operating hours for DCG, DCG was operated by 12 hr, 24 hr, 36 hr and 48 hr. As its result, the formation of thermocline did not occur during the operation of 36 hr. Also, It was effected that start reoperating from 3rd day after stop 2days under the condition of operated during 36 hr with calculated power consumption. Under the above conditions, the results of DO and water temperature analysis during the operation of DCG showed that the stratification, which was distinct previously, appeared to be weak, and relatively lower levels than those before operation were found as a result of water quality analysis on COD and chlorophyll-a, which leads to the conclusion that the water body is maintained at a stable condition due to the circulation of water by the occurrence of density current resulting from the operation of DCG.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.135-142
• /
• 2016

The purpose of this study is to evaluate propriety of using SID 180cm at Chest PA examination and to find effect of geometrical cause to the image. XGEO-GC80, INNOVISION-SH, CXDI-40EG detector and a chest phantom designed self-production was used for this study. Images were acquired at SID 180cm with changing the factor OID as 0, 75 and 83mm and were analyzed by Centricity Radiography RA1000 PACS system. Statistical program was used the SPSS (Version 22.0, SPSS, Chicago, IL, USA), p-value(under 0.05) was considered to be statistically significant. In OID 0 mm was enlarged about 2.7~3.5 mm than the actual degree of the HS, BS of phantom in all equipments. Compared with the calculated magnification has been expanded 1.6~2.8% when viewed. The OID 75 mm with OID 83 mm was extended from the CS and BS 6~8 mm range. Compared to the calculated values, the measured values are expanded from 6.1 to 7.9%. CS and BS according to the OID change showed a statistically significant difference (p<0.05) among each group, the post-analysis only OID 0 mm group appeared as an independent group, 75 mm and 83 mm are separated in the same group It was. But had no statistically significant difference could change depending on the OID (p>0.05), post-mortem analysis showed, both in the same group. Heart sizes appears larger than actual size 6~8 mm at chest PA examination which is enlarged 6.1~7.9% more than the actual theoretical value. We can find magnification of the image because of the increase of the OID due to technical limitations between cover of standing detector and the image plate. so we suggest to have occurred between them when considering the need to adjust the equipment installed by the SID to match the characteristics of the equipment.

• Korea journal of population studies
• /
• v.19 no.1
• /
• pp.139-159
• /
• 1996

This study comparatively examines a causal model of employee attatchment which focuses on employee's organizational commitment and intent to stay with an organization. This study is based on two separate studies of employee attachment among teachers : the U.S. case of the Chicago Public Schools (CPS) and the South Korean case of the Seoul Educational District (SED). The main purpose of this study is to replicate in Korea the CPS study. A revised model based on the unique characteristics of Korean teachers is also developed and estimated. The Price Mueller model of employee attachment provides the basic theoretical framework for this study. It includes five general classes of variables : 1) employee responses to work variables : job satisfaction, commitment, and intent to stay; 2) psychological stress variables: role ambiguity, role conflict, work overload, and quality of students; 3) social structural variables: autonomy, routinization, distributive justice, and legitimacy; 4) economic structural variables: pay, job security, promotional opportunities, and job opportunities; and 5) work orientation variables : career commitment, normative commitment, work motivation, affectivity, work values, and met expectations. The data was collected through questionnaire survey and a sample of 649 secondary school teachers in Seoul, South Korea, was included in the final analysis. Covariance structure analysis (LISREL) was used to estimate the causal model. The results indicate that the endogenous variables of job satisfaction and commitment play a considerably less important role than in the U.S. model in mediating the effects of the exogenous variables on intent to stay, and the model fails to explain the majority of the variance in intent to stay. In addition, the new variables added to the revised Korean model do not bave significant effects on intent to stay. The structural characteristics of the employment relationship and labor markets associated with Korean teachers forced mobility and closed external markets - are largely accountable for the major differences between the Korean and the U.S. cases. The study suggests that conceptual and empirical work on what produces employee attachment under these structural constraints needs to receive more attention in future studies.