• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.33-41
• /
• 2017

A modular specification is a contract document that specifies the requirements of production, transformation and installation in a modular construction. A problem of the currently used specification is that it does not guarantee the level of performance required by the modular construction and fails to accommodate unique characteristics of each construction because it widely uses the standard specification as it is. This study proposes a specification that reflects the unique feature of modular construction in order to improve the quality of modular construction. Research focuses on the leakage in waterproof and mechanical equipment because it is the area with the highest rate of defects. This study suggests ways to improve the modular specification as follows: 1)Descriptive specifying (following MasterFormat) 2)Propose leakage verification method and test clause 3) Reflect characteristic of modular construction. Proposed modifications to modular specification are reviewed by experts for validation and their opinion verifies suggested improvements as a way to secure the quality of modular construction and to promise characteristics of the modular specification. This improvement will be used for reference when writing construction project specification, which can be an important contract document, so that it could lower occurrence rate of the modular defects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.1
• /
• pp.17-27
• /
• 2014

As the importance of Cooperative Engagement Capability and network-centric warfare has been dramatically increasing, it is necessary to develop distributed tracking systems. Under the development of distributed tracking systems, it requires tracking filters and data fusion theory for nonlinear systems. Therefore, in this paper, the problem of nonlinear track fusion, which is suitable for distributed networks, is formulated, four algorithms to solve the problem of nonlinear track fusion are introduced, and performance of introduced algorithms are analyzed. It is a main problem of nonlinear track fusion that cross-covarinaces among multiple platforms are unknown. Thus, in order to solve the problem, two techniques are introduced; a simplification technique and a approximation technique. The simplification technique that help to ignore cross-covariances includes two algorithms, i.e. the sample mean algorithm and the Millman formula algorithm, and the approximation technique to obtain approximated cross-covariances utilizes two approaches, by using analytical linearization and statistical linearization based on the sigma point approach. In simulations, BCS fusion is the most efficient scheme because it reduces RMSE by approximating cross-covariances with low complexity.

• Clean Technology
• /
• v.20 no.4
• /
• pp.433-438
• /
• 2014

There is an increasing interest in the development of rechargeable batteries suitable for use in both hybrid electric vehicles and energy storage systems that require higher charge & discharge rates, bigger battery sizes and increased safety of the batteries. Spinel-type lithium titanium oxide ($Li_4Ti_5O_{12}$) as a potential anode for lithium ion batteries has many advantages. It is a zero-strain materials and it experiences no structural change during the charge/discharge precess. Thus, it has long cycle life due to its structural integrity. It also offers a stable operation voltage of approximately 1.55 V versus $Li^+/Li$, above the reduction potential of most organic electrolyte. In this study, Ru added $Li_4Ti_5O_{12}$ composites were synthesized by solid state process. The characteristics of active material were investigated with TGA-DTA, XRD, SEM and charge/discharge test. The capacity was reduced when Ru was added, however, the polarization decreased. The capacity rate of $Li_4Ti_5O_{12}$ with Ru (3%, 4%) addition was reduced during the charge/discharge precess with 10 C-rate as a high current density.

• Korean Journal of Environment and Ecology
• /
• v.17 no.3
• /
• pp.201-209
• /
• 2003

This study was carried out to select proper species fur early stage replantation in forest road cut-slope. From one to fifteen years elapsed forest roads in four regional areas of Gyeongsangnam-do and Jeollanam-do, sample plots were selected, and their vegetations and environmental factors were investigated. Invaded species and plant coverage have increased with elapsed years. The occurrence rate of herbs have decreased, while the occurrence of trees have increased with elapsed years. The ordination analysis showed that distribution of species was influenced by the elapsed year, the slope angle of the cut-slope, elevation, and the direction angle of the cut-slope. Dactylis glomerata, Poa pratensis, Amorpha fruticosa, Lespedeza sp., Artemisia princeps var. orientalis, Duchesnea chrysantha, Miscanthus sinensis, Pueraria thunbergiana, Zanthoxylum schinifolium, Rhus chinensis, and Weigela subsessilis were considered as proper species for replantation in forest road cut-slope, besides the species used already. Seventy seven family, 190 genus, 233 species, 38 variety, and 271 species in total were counted as invaded plant species in the survey zone. Naturalized plants were 18 species. Invaded species are, with high frequency first, Rubus crataegifolius, Artemisia princeps var. orientalis, Zanthoxylum schinifolium, Pueraria thunbergiana, Pinus densiflora, Lespedeza maximowiczii, Lysimachia clethroides, Lespedeza bicolor, Youngia denticulata, Miscanthus sinensis, and Erigeron annuus.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.3
• /
• pp.63-74
• /
• 2014

From the 1950s, the science parks were begun the composition as a way for innovation and commercialization in the world around developed countries. Since the 1980s, Korea also starting with quantitative investment in R & D for technology innovation, so far has been a continuous effort. Korea's patent creation level according to these R & D investment is already within the world's top 10, but the fact that the domestic technology trade balance appearing current competitive level compared to the developed technology is very insufficient. This means that the creation of economic value is low as compared with financial commitment. Therefore the plans to ensure the economic value through technology are required. As one of plans to do this for local economy activation through technical advances, constructing regional innovation systems and making science parks have been made. These science parks are required to develop the basic original technology in order to secure new growth engines, but the science parks in Korea are facing difficulties of performing research and development for regional industry advancement and local economy activation. Accordingly, this study attempts to organize the concept of 'science park' is similar but there is difference, and to compare institutions with similar functions based on regional innovation systems theory. In addition, the study is to obtain the application plans of basic original technology in science & research Parks through the model for overcoming weaknesses of Korea's innovation system and enabling organic cross-linking between institutions.

• Composites Research
• /
• v.33 no.4
• /
• pp.177-184
• /
• 2020

Flame retardant(FR) clothes prohibit additional fire diffusion and make the personnel do their tasks without a hitch in a flammable environment. The existing FR clothes, however, are heavy and give high thermal fatigue. Therefore, it is strongly demanded to develop a light, convenient, and eco-friendly clothes. Recently, many works have been reported to make FR fabrics with phosphorus compounds, but their performance could not satisfy the specified criteria in appraisal standards of domestic and American FR clothes or combat uniforms. In this paper, two kinds of phosphorus compounds were applied to cotton fabric. Graphene oxide functionalized with a phosphorus-rich deep eutectic solvent and ammonium polyphosphate were coated on cotton fabric by eco-friendly padding procedure. The coated fabrics were analyzed with thermogravimetric analysis, vertical flame resistance test(ASTM D6413), cone calorimeter test(ISO 5660-1), and method of test for limited flame spread(ISO 15025). It was revealed that the as-made cotton with those two materials simultaneously had better flame resistance than the cottons with each one. Furthermore, an additional coating for hydrophobicity on the FR cotton was tried for better washing fastness.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.319-333
• /
• 2017

The construction of long sub-sea tunnel does not provide the favorable condition for the installation of ventilation system to be used during construction due to the constrained construction space. For the ventilation system required during construction, the artificial island where ventilation shaft is located is constructed at some location along the sub-sea tunnel route, which requires a high construction cost. Therefore, it is intended, as much as possible technically, to minimize the construction of artificial island. However, this requires a longer distance between ventilation shafts, there-by causing increased air leakage at the ventilation duct connection points due to the higher fan pressure being required to deliver ventilation air. Previously the air leakage was studied as an important issue. In this study experiments were carried out to develop the improved duct connection method considering various conditions such as, tunnel length, etc. Additionally, its performance results with leakage rates are shown and compared to the "S" class leakage rate of SIA. As a result, the new duct coupling type of improved method is analyzed as applicable to such a 30 km long tunnel with the leakage rate of $1.46mm^2/m^2$, which is better performance than SIA leakage rates.

• Investigative Magnetic Resonance Imaging
• /
• v.17 no.3
• /
• pp.169-180
• /
• 2013

Purpose : The purpose of this study was to setup a concuurent transcranial magnetic stimulation (TMS)-functional MRI (fMRI) system for understanding causality of the functional brain network. Materials and Methods: We manufactured a TMS coil holder using nonmagnetic polyether ether ketone (PEEK). We simulated magnetic field distributions in the MR scanner according to TMS coil positions and angles. To minimize image distortions caused by TMS application, we controlled fMRI acquisition and TMS sequences to trigger TMS during inter-volume intervals. Results: Simulation showed that the magnetic field below the center of the coil was dramatically decreased with distance. Through the MR phantom study, we confirmed that TMS application around inter-volume acquisition time = 100 miliseconds reduced imaging distortion. Finally, the applicability of the concurrent TMS-fMRI was tested in preliminary studies with a healthy subject conducting a motor task within TMS-fMRI and passive motor movement induced by TMS in fMRI. Conclusion: In this study, we confirmed that the developed system allows use of TMS inside an fMRI system, which would contribute to the research of brain activation changes and causality in brain connectivity.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.153-160
• /
• 2008

Seismic modeling is used to simulate wave propagation in the earth. Although the earth's subsurface is usually semi-infinite, we cannot handle the semi-infinite model in seismic modeling because of limited computational resources. For this reason, we usually assume a finite-sized model in seismic modeling. In that case, we need to eliminate the edge reflections arising from the artificial boundaries introducing a proper boundary condition. In this study, we changed three kinds of boundary conditions (sponge boundary condition, Clayton and Engquist's absorbing boundary condition, and Higdon's transparent boundary condition) so that they can be applied in elastic wave modeling for anisotropic media. We then apply them to several models whose Poisson's ratios are different. Clayton and Engquist's absorbing boundary condition is unstable in both isotropic and anisotropic media, when Poisson's ratio is large. This indicates that the absorbing boundary condition can be applied in anisotropic media restrictively. Although the sponge boundary condition yields good results for both isotropic and anisotropic media, it requires too much computational memory and time. On the other hand, Higdon's transparent boundary condition is not only inexpensive, but also reduce reflections over a wide range of incident angles. We think that Higdon's transparent boundary condition can be a method of choice for anisotropic media, where Poisson's ratio is large.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.114-114
• /
• 1997

항만개발 사업은 매립이나 준설과 같은 해안선과 해저지형을 변화시키는 공사가 이루어지며 이는 조석조류 현상의 변화를 유발하게 된다. 특히 해안지형이 복잡한 항만이나 하구에서는 변화정도가 크게 나타나며 방파제나 선박접안 시설과 같은 항내 구조물을 축조 할 경우에도 조석조류 변화가 야기된다. 조석조류 현상의 변화는 해양 수질과 생물상에 영 향을 줄뿐만 아니라 인접한 육지에 이르기까지 크다란 피해를 유발할 수가 있다. 창조시 해 수를 육지로 범람하게 하거나 퇴적이나 침식조건을 변화시킬 수도 있으며 오염물질이 외해 로 확산되는 과정을 방해하고 해양생물의 서식조건을 악화시켜 부근 해역의 어업에 피해를 유발할 수도 있다. 또한 해안 공사 과정에 해수로 유입되는 토사나 항만 이용시에 배출되는 폐수 등이 항내 수질과 생태계를 변화시킬 수 있다. 따라서 조석조류와 수질변화를 사전에 예측하고 이를 최소화하는 방안이 강구되어야 한다. 조석조류와 수질 변화를 사전에 예측하 는 방법으로 축소모형 실험과 컴퓨터 시뮬레이션이 사용된다. 축소모형 실험은 현장을 재현 하는데 많은 경비와 시간이 소모되며 예측에 한계가 있다. 반면에 컴퓨터 시뮬레이션은 대 상해역의 지형과 조류 그리고 수질특성에 적합하게 모델을 개발할 경우 예측력이 매우 높기 때문에 현재 가장 널리 이용되고 있다. 본 연구는 유한 요소법에 기초하여 미국 공병단 (United States Army Corps of Engineers)에서 개발한 TABS-2 모델을 이용하여 온산항에 서 시행되는 부두건설에 따른 조석조류 및 수질변화를 시뮬레이션하였다. 측정된 자료로 모 델 계수를 보정하고 검증하였으며 항내 매립과 준설이 이루어질 때 나타나는 조위와 조속변 화를 예측하였다. 매립과 준설공사시 유출되는 토사가 조석조류현상에 따라 이동 확산되는 범위와 농도분포를 예측하였다.ophobic components)은 75~80%, 친수성 물질(hydrophilic components)은 30~33%정도의 분포를 보였고, 전염소 및 전오존 공정을 거친 처리수에서는 각각 62.2-62.8%, 43.9~49.0% 및 50~ 55%, 40~57% 정도의 분포를 보였다. 그리고 웅집-침전을 거친 처리수에서는 그 분포가 77~82%, 24-48%였다. 전주리 공정을 통하여 소수성 물질(byoghobic components)의 분포가 감 소하는 것을 볼 때 전염소 및 전오존 처리가 용존유기물의 응집에는 오히려 역 효과를 나타내는 것으로 판단된다. 것으로 판단된다.여 황토 2g에 대하여 Hieltijes and Lijklema 방법에 의해 Adsorbed-p, Nonapatite inorganic-P(NAI-P), Apatite-p, Organic-P로 구분하여 분석하고, 총인(Total Phosphorus)을 Standard Methods에 따라 Persulfate digestion후 0.45 m membrane 여지 여과하여 여액에 대해 PO3-4-P의 농도를 Ascorbic Acid 법으로 측정한 결과, NAI-P가 가장 큰 비율을 차지하였고, 부원료로 첨가된 금속 양이온 중 Fe3-이온이 흡착에 기여하는 정도가 가장 큰 것으로 평가되었다.다당류 T-AS의 보체 활성화 기작은 classical과 alternative complement pathway의 양 경로를 통해 활성화 되었다. T-AS 분획은 mouse내의 특정 혈청단백을 증가시켰으며, 항체 생성능의 증가가 관찰되어 effect T 세포의 활성화가 나타나고 있음을 알 수 있었다. T-AS는 생체내 투여시에 대식세포의 탐식능이 증진되었으며, 대식세포 기능 저해제에 의한 대식세포의 기능 저해 현상이 회복되었다. 이와 같은 결과들로부터, T-AS의 항암 활성은 활성