• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.336-341
• /
• 2013

In this paper, the design concept of a low-temperature vacuum blackbody was described, and thermophysical model of the blackbody was numerically evaluated. Also the working performance of low-temperature vacuum blackbody was evaluated using infrared camera system. The blackbody system was constructed to operate under high-vacuum conditions ($2.67{\times}10^{-2}$ Pa) to reduce temperature uncertainty, which is caused by vapor condensation at low temperatures usually below 273 K. In addition, both heat sink and heat shield including cold shield were installed around radiator to prevent heat loss from the blackbody. Simplified mathematical model of blackbody radiator was analyzed using modified Stefan-Boltzmann's rule. The infrared radiant performance of the blackbody was evaluated using infrared camera. Based on the results of measurements, and simulation, temperature stability of the low-temperature vacuum blackbody demonstrated that the blackbody system can serve as a highly stable reference source for the calibration of an infrared optical system.

• 한국해양학회지
• /
• v.5 no.1
• /
• pp.37-40
• /
• 1970

This work concerns age studies of the spanish mackerel by vertebrae. The spanish mackerel samples were obtained mainly from Yosoo and Inchon regions during July to December, 1969. A total of 292 fish was collected during the present study. Except the vertebrae, the incremental growth is found to be vague or complicated on the most bony parts in spanish mackerel. The spanish mackerel has 50 vertebrae, and the size of vertebra varies according to its position. After several studies, therefore, sample centrum was selected from the 23rd vertebra throughout the present study. Sample centrum was then stained with Alizarin Red S. and examined under binocular stereoscopic microscope illuminated by reflected light. The surface of the centrum shows many ring-marks running parallel to the edge. The ring-marks were counted and the measurements of centrum radius (R) and radii of the ring-marks (r$\_$i/) were made by eyepiece micrometer. From available data, the average of each ring-mark radius was found to be; r$\_$1/=2.05mm, r$\_$2/=3.11mm, r$\_$3/=4.05mm, r$\_$4/=4.89mm, r$\_$5/=5.70mm and r$\_$6/=6.47mm, respectively. The mean fork length at the time of ring-mark formation was calculated to be; l$\_$1/=297.6mm, l$\_$2/= 390.1mm, l$\_$3/=472.2mm, l$\_$4/=545.5mm, l$\_$5/=616.2mm, and l$\_$6/= 683.4mm, respectively.

• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.555-564
• /
• 2017

The current radiation risk assessment for occupational exposure is based on the measured exposure dose and health checkups of workers. This people-centered risk assessment may occur errors because absence of using personal dosimeter or unrelated health symptoms of individuals lead to difficulties in obtaining accurate data from workers. In addition, although the established legal upper dose limit was used as a reference for the assessment, it does not imply that this limit is the optimal dose of radiation workers should get; ALARA principle should always be appreciated. Therefore, a new risk assessment model that can take account of all the important factors and implement optimization of radiation protection is required at the national level. In this paper, based on the KOSHA Risk Assessment, we studied on the workplace-centered risk assessment model for radiation field rather than the people-centered. The result of the study derived a right model for radiation field through the analysis of the risk assessment methods in various fields and also found data acquisition methods and procedures for applying to the model. Multidimensional model centering on the workplace will enables more accurate radiation risk assessment by using a risk index and radar plot, and consequently contribute to the efficient worker management, preemptive worker protection and implementation of optimization of radiation protection.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.6
• /
• pp.329-334
• /
• 1995

Transformation system of rolC gene, dwarf gene in Lycium chinenese Mill. established by using system. Pin-punctured leaves induced numerous adventious buds in abaxial side when cultured on 3/2 MS medium containing 2.0 mg/L zeatin. Survival rate and shoot regeneration frequency of leaf explants decreased as kanamycin sulfate level increased. Shoot buds were not regenerated on 3/2 MS medium containing 10 mg/L kanamycin sulfate and 2.0 mg/L zeaein. Of the level tested, 10 mg/L of kanamycin sulfate was optimum in selection of kanamycin sulfate resistant plant. Co-culture time of bacteria and leaf explants was affected at the frequency of shoot regeneration and survival of leaf explants. Leaf explants co-cultivated during above 48hr severely decreased survival rate and shooting rate. Best result on survival rate and shooting rate were obtained when exposed for 24 h. 80 explants of 105 leaf explants survived on 3/2 MS medium containing 2.0 mg/L zeatin and 10 mg/L kanamycin sulfate, and 15 shoots was regenerated on the same medium. To select kanamycin sulfate resistant plant, regenerate as cultured on 3/2 MS medium containing 10 mg/L kanamycin sulfate, and obtained 5 kanamycin resistant plants. Southern blot analysis conformed that the rolC gene was incorporated into the genomic DNA of kanamycin resistant plants.

• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.71-82
• /
• 2012

Some previous studies adopted a method statistically based on the observed traffic volumes and travel times to estimate the parameters. Others tried to find an optimal set of parameters to minimize the gap between the observed and estimated traffic volumes using, for instance, a combined optimization model with a traffic assignment model. The latter is frequently used in a large-scale network that has a capability to find a set of optimal parameter values, but its appropriateness has never been demonstrated. Thus, we developed a methodology to estimate a set of parameter values of BPR(Bureau of Public Road) function using Harmony Search (HS) method. HS was developed in early 2000, and is a global search method proven to be superior to other global search methods (e.g. Genetic Algorithm or Tabu search). However, it has rarely been adopted in transportation research arena yet. The HS based transportation network calibration algorithm developed in this study is tested using a grid network, and its outcomes are compared to those from incremental method (Incre) and Golden Section (GS) method. It is found that the HS algorithm outperforms Incre and GS for copying the given observed link traffic counts, and it is also pointed out that the popular optimal network calibration techniques based on an objective function of traffic volume replication are lacking the capability to find appropriate free flow travel speed and ${\alpha}$ value.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.365-377
• /
• 2020

Continuous monitoring and immediate response is essential to protect the national maritime territory and maritime resources from the activities of illegal ships. Synthetic Aperture Radar (SAR) images with a wide range of images are effective for maritime surveillance asthe weather and day-night conditions rarely affect to image acquisition. However, an effective ship detection is not easy due to the huge data size of SAR images and various characteristics such as the speckle noise. In this study, the Human Visual Attention System (HVAS) algorithm was applied to KOMPSAT-5 to extract the initial targets, and the SAR-Split algorithm depending on the imaging modes was used to remove false alarms. The detected targets were finally selected by the Constant False Alarm Rate (CFAR) algorithm and matched with the ship's Automatic Identification System (AIS) information. Overall, the detected targets were well matched with AIS data, but some false alarms by ship wakes were observed. The detection rate was about 80% in ES mode and about 64% in ST mode. It is expected that the developed ship detection algorithm will contribute to the construction of a wide area maritime surveillance network.

• Korean Security Journal
• /
• no.19
• /
• pp.1-21
• /
• 2009

Manpower demand forecasting in private security industry can be used for both policy and information function. At a time when police agencies have fewer resources to accomplish their goals, forming partnership with private security firms should be a viable means to choose. But without precise understanding of each other, their partnership could be superficial. At the same time, an important debate is coming out whether security industry will continue to expand in numbers of employees, or level-off in the near future. Such debates are especially important for young people considering careers in private security industry. Recently, ARIMA model has been widely used as a reliable instrument in the many field of industry for demand forecasting. An ARIMA model predicts a value in a response time series as a linear combination of its own past values, past errors, and current and past values of other time series. This study conducts a short-term forecast of manpower demand in private security industry using ARIMA model. After obtaining yearly data of private security officers from 1976 to 2008, this paper are forecasting future trends and proposing some policy orientations. The result shows that ARIMA(0, 2, 1) model is the most appropriate one and forecasts a minimum of 137,387 to maximum 190,124 private security officers will be needed in 2013. The conclusions discuss some implications and predictable changes in policing and coping strategies public police and private security can take.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.1
• /
• pp.13-22
• /
• 2016

Recently, interest for environmental pollution in various fields is on the increase, and the researches on the life cycle assessment of environmental performance assessment method for calculating the environmental loads are currently most performed. It is expected to have a significant influence on the environment, since SOC infrastructures are go through a variety of materials, manufacturing process, however it is judged that researches and measures for environmental pollution is insufficient. In this study, we build the data for 204 of steel bridge designed after 2000 year, and the 100 of bridge which were selected to from obtained results were calculated the environmental loads at the planning stage based on the life cycle assessment. In addition, standard classification systems in work type for steel bridges were established. Based on this, the basic design data and input materials for the bridges are applied to the LCI DB, and the environmental load for required material is evaluated and is shown as Eco-point. Environmental loads obtained from this study, it is judged that can be utilized as a basic data for the process of the life cycle assessment in future steel bridge design.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.884-889
• /
• 2015

Appropriate evaluation of thermal insulation property of structural member and valid control of cooling/heating energy are important for improving building's energy efficiency. The typical heating system of house in Korea is the floor heating one. The radiation heating system is not only appropriate to climate and geographic conditions of Korea, but also advantageous to provide emotional comfort by the warm feeling of floor. Based on living conditions in Korea, scaled models of the wooden house and concrete house were designed. The ceiling was made of styrofoam insulation and the four sided walls and bottom were made of plywood and concrete, respectively. The floor was heated by heating film. Indoor vertical temperature distributions by floor heating system were measured by thermocouple, and surface temperatures on walls were measured by infrared thermography. Also, thermal insulation property of wooden wall was evaluated to build database for improving energy efficiency of wooden building. It is expected that collected data during tests of various types of floor and wall composition could be referenced for evaluating thermal environment of actual conditions of houses.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.82-82
• /
• 2000

16세기부터 씌워진 과실봉지는 초기 병해충을 방지할 목적만으로 사용되었지만, 현재는 방균과 방충의 효과와 함께 자연현상의 최적화를 위한 차광성, 발수성, 투기성 및 투습성 등 을 조절하며 과실의 외관과 과중 및 당도에까지 영향을 미치는 바 과실봉지의 기능성 부여 를 위해서는 고도의 기술력이 요구되고 있다 하겠다. 실제 과실봉지를 적용하는 한 예로서 “배”를 들 수 있는데, 그 중 황금배는 흑반병, 각 종 병충해 및 동녹으로 인한 상품가치의 하락으로 현재 수요를 충족시키지 못하고 있는 실 정이다. 과피의 비정상적인 코르크화로 인해 발생하는 동녹은 과피의 물리적 할렬과 생리적 장해에 의해 발생하는 것으로 알려져 있다. 과실이 비대해짐에 따라 과피의 기공(과점)이 할 렬하면서 코르크화가 진행되는데 그 발생정도나 시기는 배의 품종에 따라 다르나 일반적으 로 코르크화는 기상조건, 특히 습도와 밀접한 관련이 있다. 황금배의 재배에 봉지를 적용하면 과피의 코르크화가 억제되는데 봉지 내의 대기 환경 이 외기보다 안정적으로 유지되고 직사광선이나 농약 및 마찰로부터 과실을 보호해 주기에 동녹이 어느 정도 방지될 수 있다. 만일 과실이 외부로부터 받는 자극을 적절히 조절하는 기능성 봉지가 제 역할을 다해줄 수 있다면 동녹을 방지하여 외관을 개선함은 물론, 배의 성장에 적합한 미시대기 조건을 제공함에 따라 보다 높은 당도를 지닌 대과의 재배가 가능 하다고 판단된다. 그러나 기존의 황금배봉지는 동녹의 정도를 완화시킬 뿐 완전히 방지할 수 없었으며, 봉지를 적용한 재배조건에서의 동녹 발생기구를 정확히 이해하지 못했었기에 효과적으로 봉지의 기능을 개선하는 것이 불가능하였다. 과실의 미려도는 과실의 맛과 함께 그 가치를 결정짓는 중요한 물성으로서 우리나라 황 금배 재배환경과 특성에 알맞은 배봉지의 제작이 선결될 때, 배 품질의 향상, 안정된 공급이 가능하게 될 것이며 아울러 농가의 수입증대와 수출 경쟁력 강화가 이루어질 수 있을 것으 로 판단된다. 이러한 측면에서 황금배 재배농가가 당면한 동녹발생의 문제점을 효과적으로 해결하고 아울러 기타 과실의 재배용 봉지의 기능성 부여를 위한 새로운 과실 봉지 처리 기 술의 개발이 절실히 요구되고 있다. 상기한 측면에서 본 연구에서는 과실봉지를 적용했을 때 봉지 내의 미시대기 조건이 봉 지의 특성에 따라 변화되는 양상을 파악하기 위해서 실험실적으로 field 조건을 모사하고 봉 지 내의 온도 및 습도를 측정 분석하였다. 아울러 봉지 종류간에 동녹발생 정도가 상이한 점에 예의 주시하여 다양한 봉지의 적용실험을 통해 최적의 과실봉지 조건을 탐색하였다.