• Food Science and Preservation
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2011

Kochujang-gulbi, a Korean traditional food, was prepared with kochujang and freeze-dried gulbi slices. Kochujang-gulbi was treated with high hydrostatic pressure (200, 400 and 600 MPa) and gamma-irradiation (7, 10, 20 and 30 KGy) to improve its quality and shelf-life. The pH of high hydrostatic pressure and gamma-irradiation treated kochujang-gulbi samples did not significantly different compared to that of control. However, Hunter L value slightly increased, and Hunter a and b values decreased by high hydrostatic pressure and gamma-irradiation treatment. During storage, the pH and color of high hydrostatic pressure and gamma-irradiation treated kochujang-gulbi samples did not significantly changed. The VBN and TBA level decreased by the increase treatment of high hydrostatic pressure and then slowely increased during storage. The VBN and TBA level of kochujang-gulbi samples treated by the strong gamma ray emission slowely increased during storage. In particular, gamma-irradiation treatment was very effective to sterilize microorganisms when compared to that of high hydrostatic pressure in kochujang-gulbi products. In addition, the high hydrostatic pressure and gamma-irradiation treated kochujang-gulbi samples shown significantly lower total viable cell number than control for the 20 days of storage at room temperature with retort pouch packaging.

• Food Science and Preservation
• /
• v.18 no.1
• /
• pp.33-38
• /
• 2011

We investigated the quality characteristics of cookies prepared after addition of various concentrations of used coffee grounds (0%, 1%, 3%, and 5%, all w/w) as a substitute for flour. As coffee grounds concentration rose, decrease in the pH of cookie dough was evident. In terms the water-holding capacity of dough, cookies prepared 3% (w/w) coffee grounds yielded the highest value. With an increase in coffee grounds concentration, the color a value rose, but the L and b values fell. The gelatinization temperature became higher, but both peak viscosity and 15 min-height values declined. The spread and loss ratios decreased but the leavening rate rose significantly with elevation of coffee grounds concentration. The hardness of cookies rose but slightly, as coffee grounds concentration rose. Upon sensory evaluation of all of appearance, flavor, and overall preference, cookies prepared with addition of used coffee grounds were superior to those without grounds, whereas those prepared using 1%-3%(w/w) coffee grounds showed the highest overall acceptability. Thus cookies made using coffee grounds can be economically competitive. In addition, the ingredients of coffee powder and used coffee grounds were shown to be very similar, except that coffee grounds contain 15-fold less caffeine than dose coffee powder. As health concerns are popular today, the use of coffee grounds to manufacture processed food may be acceptable.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.2
• /
• pp.71-76
• /
• 2001

Recently, sludge disposal becomes one of the most serious environmental problems. Because the landfilling and ocean dumping of sludge materials will be prohibited in the near future, the proper treatment?disposal methods should be investigated. Also, oyster shells, piled at the coast, cause adverse effects in coastal fishery, public water surface, natural landscape, public health and so on. Thus, the purpose of this study is to evaluate the dissolution characteristic of metal compounds during soil application experiment using sewage treatment sludge mixed with oyster shells. The dissolution experiment conducted 100days under artificial rainfall and farming soil, mixed with sewage treatment sludge and oyster shells, was put into the pots(approx. 0.5L). The results from dissolution experiment as follows. 1. K, Na was $5{\sim}20mg/{\ell}$, and Ca was less than $90mg/{\ell}$. 2. Heavy metals such as Cd, Cu, As, Pb, Cr, Hg are dissoluted far less than the soil pollution guideline. The application of sewage sludge mixed with oyster shells increases pH(soil acidity)and buffer capacity(CEC) of farming soil, and heavy metals are thought to be attached to soil as insoluble forms.

• The Journal of the Korea Contents Association
• /
• v.8 no.4
• /
• pp.237-246
• /
• 2008

The purpose of this study was to develop relaxation training contents for middle and high school archery players with considering the ecological validity of social, cultural, and sports environment in Korean but also examine the effect of developing relaxation training contents through case study approach and interviews. The relaxation training contents was based on previous researches about relaxation program. In addition, in order to develop the program 3 archery experts and 2 sport psychologists had meetings. The relaxation training contents categorized as orientation, breathing regulation, progressive relaxation training, cognitive restructuring, meditation, heart rate biofeedback training, autogenic training, behavior therapy, self regulation. The experimental group were 6 male Korean national archery substitute players, who were selected in 2007. The effects was examined on competitive state anxiety inventory-2, heart rates, archery score and interviews. As the result of applying the developed program of this study on the field, competitive state anxiety, somatic state anxiety and heart rate were decreased. In the interviews athletes told that they were relaxed psychologically and physically. This result demonstrated the relaxation training program were effective.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1227-1240
• /
• 2014

Abandoned mines often cause environmental problems, such as alteration of landscape, metal contamination, and landslides due to a heavy rainfall. Geotechnical and rheological tests were performed on waste materials corrected from Imgi waste rock dump, located in Busan Metropolitan City. Debris flow mobility was examined with the help of 1-D BING model which was often simulated in both subaerial and subaqueous environments. To determine flow curve, we used a vane-penetrated rheometer. The shear stress (${\tau}$)-shear rate (${\dot{\gamma}}$) and viscosity(${\eta}$)-shear rate (${\dot{\gamma}}$) relationships were plotted using a shear stress control mode. Well-known rheological models, such as Bingham, bilinear, Herschel-Bulkley, Power-law, and Papanastasiou concepts, were compared to the rheological data. From the test results, we found that the tested waste materials exhibited a typical shear shinning behavior in ${\tau}$-${\dot{\gamma}}$ and and ${\eta}$-${\dot{\gamma}}$ plots, but the Bingham behavior is often observed when the water contents increased. The test results show that experimental data are in good agreement with rheological models in the post-failure stage during shearing. Based on the rheological properties (i.e., Bingham yield stress and viscosity as a function of the volumetric concentration of sediment) of waste materials, initial flowing shape (5 m, 10 m, and 15 m) and yield stress (100 Pa, 200 Pa, 300 Pa, and 500 Pa) were input to simulate the debris flow motion. As a result, the runout distance and front velocity of debris flow are in inverse propositional to yield stress. In particular, when the yield stress is less than 500 Pa, most of failed masses can flow into the stream, resulting in a water contamination.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1105-1116
• /
• 2014

A stochastic rainfall model, NSRPM (Neyman-Scott Rectangular Pulse Model), is able to reflect the cluster characteristics of rainfall events which is unable in the RPM (Rectangular Pulse Model). Therefore NSRPM has advantage in the hydrological applications. The NSRPM consists of five model parameters and the parameters are estimated using optimization techniques such as DFP (Davidon-Fletcher-Powell) method and genetic algorithm. However the DFP method is very sensitive in initial values and is easily converge to local minimum. Also genetic algorithm has disadvantage of long computation time. Nelder-Mead method has several advantages of short computation time and no need of a proper initial value. In this study, the applicability of parameter estimation methods was evaluated using rainfall data of 59 national rainfall networks from 1973-2011. Overall results demonstrated that accuracy in parameter estimation is in the order of Nelder-Mead method, genetic algorithm, and DFP method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1065-1079
• /
• 2014

The ultimate behavior of reinforced concrete corbel is complicated due to the primary design variables including the shear span-to-effective depth ratio a/d, flexural reinforcement ratio, load condition, and material properties. In this study, a simple indeterminate strut-tie model reflecting all characteristics of the ultimate strength and complicated structural behavior is proposed for the design of the reinforced concrete corbels with shear span-to-effective depth ratio of $a/d{\leq}1$. A load distribution ratio, defined as the fraction of applied load transferred by horizontal truss mechanism, is also proposed to help structural designers perform the design of reinforced concrete corbels by using the strut-tie model approaches of current design codes. For the development of the load distribution ratio, numerous material nonlinear finite element analyses of the proposed indeterminate strut-tie model were conducted by changing primary design variables. The ultimate strengths of reinforced concrete corbels tested to failure were evaluated by incorporating the proposed strut-tie model and load distribution ratio into the ACI 318-11's strut-tie model method. The validity of the proposed model and load distribution ratio was examined by comparing the strength analysis results with those by the ACI 318-11's conventional design method and strut-tie model methods of current design codes.

• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.89-96
• /
• 2020

Water management agencies under the Ministry of Environment produce and accumulate qualified basic data for major rivers. However, the integrated management of the river water has been weak since the artificial water circulation process, such as the intaking and drainage of agricultural water, has not been examined in the basin, which includes many agricultural land. In this study, a study was conducted on how the power usage method (operating time method) based on the running time can be applied and improved among indirect flow rate measurement methods used to investigate flow rates collected by the riverside for agricultural water purposes, and thus the resultant data of high reliability can be obtained at low cost. The operation time method is suitable for small-scale water pumping stations where it is difficult to secure real-time power supply data. The reliability of the data was verified through the correlation analysis with the actual flow rate, and it was found that the flow rate calculated by the operation time method reflecting the level of the stream to which the inlet of the pumping station is connected can be reasonably matched with the actual flow rate. In addition, it was confirmed that the investment cost at the time of initial installation of the facility was highly efficient by generating qualified flow data at low cost through comparison with direct flow rate measurement methods. If flow data is secured by applying the operation time method to large and small water farms located along the riverside, it is expected that more quantitative and integrated stream water management will be possible.

• Spatial Information Research
• /
• v.8 no.1
• /
• pp.51-67
• /
• 2000

This was preliminary research to develop the mapping method for the Urban Ecological Map. This research provided preliminary evaluation model for ecological conservation. The model was applied to Mt. Kwanak in Seoul, and the Urban Ecological Map was produced and tested. The results are as follows. First, some problems were found in the legal Ecological Map ; insufficient and only qualitative criteria for evaluation of the conservation value in an urban area, and exclusion of the areas designated by other was laws. Secondly, in order to improve the evaluation criteria for Ecological Map, some missed sites should be added to the legal list of valuable sites. Those are needed for ecological restoration, conservation of wildlife habitats managed by a city government , and establishment of eco-corridor. Third, the efficient mapping process for Urban Ecological Map must have two steps. On the first step an ecological evaluation should be done based on pure conservation value. On the second one the Ecological Map for legal action control should be made. And the Analytic Hierachy Process is considered as a Helpful technique for improving the objectivity of evaluation model. Fourth, the legal action control system for Urban Ecological Map should be reviewed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.2
• /
• pp.13-21
• /
• 2000

Au-black for the application of the long wavelength infrared absorber has been prepared by evaporating Au under nitrogen gas-filled low vacuum condition. Characteristics of the deposited Au-black were carefully investigated through structural analysis, infrared absorbance measurement, and patterning of the layer, all of which are dependent on the deposition condition. High density of micro-cavity that trapped infrared were obtained, and infrared absorbance in the wavelength range from 3 $\mu\textrm{g}$ to 14 $\mu\textrm{g}$ was found to be about 90% when the Au-black layer was produced under the deposition condition of mass Per area of about 600 $\mu\textrm{g}$/cm$^{2}$ and chamber pressure of above 1 Torr. Photoresist lift-off process could be performed to pattern the Au-black, of which mass per area was below 900 $\mu\textrm{g}$/cm/ sup 2/. In view of absorbance, heat capacity, and pattern formation, the deposition condition of chamber pressure of about 1 Tow and mass per area of about 600$\mu\textrm{g}$/cm$^{2}$ was most adequate for preparing the Au-black as an infrared absorber.