• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.87-95
• /
• 2008

One way to shield an atypical structure to secure the occupant safety of an impact vehicle is to stack energy absorbing material modules around the structure. To be applicable to a cushion module, material must have enough energy absorbing capabilities while satisfying the safety requirements of the vehicle occupant. Static compression test of the potential materials gives a good indication which material is good for a slacking module. This paper presents the mechanical properties that a cushion material must have to satisfy the safety requirements. Static tests are performed for Quard-Guard system module, sand bag, recycled tires, Geo-Container, Geo-Cell and Expanded Polystyren (EPS) Blocks. Static test results are discussed and EPS block of $30kg/m^{3}$ density showed good potential for a cushion module. To check the dynamic effect of EPS block, drop tests have been made up to 35.6km/h impact speed. Drop test results are compared with static test results and no appreciable difference was found. To improve the EPS module property, making holes to the block is suggested and drop test are performed for the modified blocks. From the drop test results, design values are suggested.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.1
• /
• pp.43-50
• /
• 2001

In order to analyze the dynamic motions of fish cage systems made of a frame and a netting under the conditions of waves and current, the hydraulic model experiment at towing tank and the numerical computation using boundary integral element method based on linear potential theory were carried out on a square and a circular type of fish cage, The computed and measured results for the dynamic motions of model fish cage systems showed that the heave and pitch motions were almost unaffected by the inclusion of nets, while the surge motions were very reduced by drag force acting on them. In addition, irregular wave-induced motions of fish cages included non-negligible 2nd order harmonic components at high frequency nearly twice the wave frequency. The reason why these motions were considered was due to resonance or structural components of frames being overflown and out of water during a wave cycle. It was found that circular type was more desirable structure in the open sea than square one only in the respect of dynamic motions due to waves and current. Further verifications were needed considering hydrodynamic forces, fatigue life, and structure analysis based on long term stochastic waves including frequency and time domain for the purpose of analyzing and designing fish cage systems.

• Journal of Information Technology Application
• /
• v.2 no.1
• /
• pp.25-53
• /
• 2000

As Information Technology has developed, The structure of information system used in organizations is changing from centralized computing structure to distributed computing structure. The roles of information department have expanded, which is not only develope and maintain system but also provide usage-support service to end-user. If organization support end-user properly, they get many benefits. if they don't do it properly, they waste many resource. Therefore, the purpose of this study is the search for quality determinant factors and type of information that provide user effective service under web-based information system. The result of this study is as follow First, when SERVQUAL is used, the quality determinant factors of usage-support service are categorized three, which is responsibility and assurance, empathy and tangable, and reliability. When SERVPERF is used, the determinant factors consist of five, but the use of assurance as a factor is cautious. Second, reliability and tangability among determinant factors affect general service quality, and tangibility is most important factors. third, When the locations of user are distributed the degree of general service quality is not different whether formal or informal information center provide usage-support service. This study may suggest practical implication as follows; First, as user are good at to use information system the degree of importance for tangibility are decreased. when user are individualized and improve their ability to use information system, empathy will not be important factors any more, therfore it assume that reliability will be most important factors. Second, if organizations promote not only formal informaton center but also informal inforamtion center they may support end-user more effectively. However, this study has the following limitations: First, it is difficult to generalize the result of this study Second, service quality determinant factors used in this study don't explain the influence to general service quality fully. Third, this study analyze a simple relation between service quality determinant factor and general service quality. Finally, this study don't distinguish between information system service and information support service.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.308-314
• /
• 1987

The adsorption behavior of some chelating agents on the Amberlite XAD-7 resin was studied to obtain the optimum conditions for the preparation of chelating agent-XAD-7 resins. The chosen chelating agents are cupferron (CP), diphenylcarbazone (DPC), salicylaldoxime (SAO), thiosalicylic acid (TSA), and dimethylglyoxime (DMG), which have been well known chelating agents to Cu(Ⅱ) and Ni (Ⅱ) ions. Among the chelating agent-XAD-7 resins, SAO-XAD-7 and DMG-XAD-7 resins were evaluated as appropriate impregnated resins by investigating their stabilities in the wide pH range and high abilities to adsorb Cu(Ⅱ) and Ni(Ⅱ) ions. The selective adsorption of Cu(Ⅱ) from Ni(Ⅱ) was possible by changing pH condition by SAO-XAD-7 resin. The adsorption capacities of SAO-XAD-7 and DMG-XAD-7 for Cu(Ⅱ) were $7{\times}10^{-3}mmol$ Cu(Ⅱ) per gram of resin and $2{\times}10^{-3}mmol$ Cu(Ⅱ) per gram of resin, respectively. The quantitative recovery of Cu(Ⅱ) adsorbed by the resin was demonstrated. The adsorption behavior of Cu(Ⅱ) and Ni(Ⅱ) by the single and mixed bed of chelating agent-XAD-7 resin was discussed.

• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.441-457
• /
• 2009

This study estimated ultimate load by the determination methods based on ultimate load, yield load and settlement using experimental data from static load tests that applied load to driven piles used in sandy grounds at home and overseas until failure appeared markedly. Estimated ultimate load was normalized with actually measured failure load, and was compared among the determination methods according to the characteristics of pile. In addition, I have identified to the determination methods suitable for estimating ultimate load, and reevaluated the safety factor when determining allowable load. From the results of this study were drawn conclusions as follows. Among ultimate loads estimated by the ultimate-load-based determination methods, the value interpreted by Chin's method tended to overestimate actual measurements, and B. Hansen 80% standard and the stability plot method were considered most reliable as their results were closest to actual measurements. According to the results of this study, in calculating the allowable load, if the safety factor to be applied to failing load obtained by the method of determining extreme load is converted to the safety factor applied to the Standards for Structure Foundation Design, a value larger than 3.0 should be applied except the B. Hansen 90% method, and a value larger than 2.0 should be applied in the methods of determining yield load. In addition, if the safety factor to be applied to load obtained by the settlement standard is converted based on safety factor 3.0 for extreme load, a value smaller than 3.0 should be applied to the total settlement standard and the net settlement standard.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.603-612
• /
• 2010

Recently, with the advance of computing and networking technique, the high speed internet becomes widespread, however, it is still hard job to do streaming the media which requires high network bandwidth over the internet. Previous VoD system researches for streaming over the internet mainly proposed techniques that controls the QoS(Quality of Service) of the media in proportion to the network status. Though, this could be the solution for the service provider while the service user who wants constant QoS may not satisfy with variable QoS. In the paper, we propose greedy precedent frame transmission technique, GPFT, for guarantee of constant QoS. In GPFT, Streaming VoD server prefetches precedent frames and transmits the frame greedily by increasing the frame transmission rate while the available network bandwidth is high. The GPFT uses the prefetched precedent frames to guarantee the QoS while the available network bandwidth is low. The experiment result shows that the proposed GPFT could guarantee the constant QoS by prefetching the frames adaptively to the network bandwidth with the characteristic of video stream.

• Science of Emotion and Sensibility
• /
• v.12 no.3
• /
• pp.317-324
• /
• 2009

The aim of this study was to determine whether or not cardiovascular reactivity parameters serve as good indicators in identifying differential emotion in children. The study particularly focused on five emotions(i.e., happiness, sadness, anger, stress, and boredom), thus, study participants were introduced to a combination of music, color, stories, and dolls to induce complex emotions. During the experiment, corresponding cardiovascular reactivity in response to the conditioned stimuli were recorded on physiological parameters including HR, RSA, HRV, HF HRV, LF HRV, and FPV. After the cardiovascular reactivity responses were measured, participants rated on the types and intensity of emotions they had experienced during the emotional stimuli exposure. Results on psychological response show that four emotions except for stress were appropriately and effectively induced participants by emotional stimuli. Findings of physiological responses suggest that, except for RSA, all of the physiological indicators show significant differences among five emotions. This indicates that children' emotions can be measured and differentiated by cardiovascular reactivity, or in other words, emotion specific responses have the ability to distinguish different emotions in children.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.304-314
• /
• 2010

This study was carried out to find out potential use of ochre as an agent to reduce phosphorus content in water. Ochre is a by-product from treatment of acid mine drainage (AMD) which is composed mostly of $Fe_2O_3$, $Fe_2O_3{\cdot}H_2O$, $FeO{\cdot}OH$ and $Fe(OH)_3$. Three ochre samples (ochre-H, ochre-D and ochre-S) were collected from three treatment facilities in Gangwon province. Physico-chemical characteristics of three ochre samples including pH, electrical conductivity, total phosphorus, available phosphorus, particle size distribution were analyzed. Scanning electron microscopy (SEM) energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and X-ray fluorescence (XRF) analysis were also carried out. In addition, experiments for phosphorus removal from water was performed. Calcium content of ochre-H was higher than that of ochre-D and ochre-S, whereas iron content of ochre-H was lower than that of ochre-D and ochre-S. All the phosphorus in water up to maximum 191,411 mg $kg^{-1}$ per unit mass of ochre was removed with ochre-H. Ochre has immense potential as an agent to reduce phosphorus content in water.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.348-361
• /
• 2012

Altitude is a factor that plays an important role in the diversity, richness and composition of species. Recently, much attention has been paid to the distribution of butterflies and insects according to altitude. The purpose of this article is to propose a method to preserve and manage species efficiently by reviewing the distribution of butterflies according to different altitudes in Mt. Gyeryong National Park. This study found that the number of species and individuals decreased as the altitude increased, possibly due to the increased amount of shade caused by the crown density. When analyzing the factors influencing the distribution of species other than altitude, it was found that the slope, vegetative colonies and hydrosphere distance were correlated with the change in species distribution. As these species are closely related to food plants, it may save time and reduce the cost as well as allow an efficient evaluation of the bio-diversity if these species are selected as biological indicator species suitable for detecting the changes in the forest. It is judged to be a more efficient means of species preservation to accumulate and quantify the materials regarding environmental elements such as the climate, microclimate and food plants, as this would allow the butterfly distribution to be estimated.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.463-471
• /
• 2012

Objective of this study is to provide basic information for developing more differentiated and targeted forest healing policy and Korean medical healing programs grounded on consumer preference for forest based Korean medical healing tourism products. The internet survey(CAWI) by percentage quota sampling with 400 Seoulite ages over 30 by the age, area, and gender was conducted, and 317 samples were used for a final analysis. 61.5% of the Seoulite associated 'forest bath/walking in the woods/tree' with an image of a forest based Korean medical healing tourism product, and preference for the product and the intention to use were positive at the percentages of 72.9% and 67.5%, respectively. Preferred areas were Seoul/Gyeonggi-do(53.5%) and Gangwon-do(38.8%). 'Stress solving and refreshment', 'taking a forest bath and a walk', and 'maintaining and promoting health' were the main purposes of the use. As for a therapy, 'walking therapy' was most preferred, and 'ergotherapy' was the next. First priority as for a use facility was 'healing trail', and 'professional medical facility' ranked second. Although important decision attributes were ' cost of use', 'food', and 'friendliness of medical staff', all the other sets of attributes related to use convenience, quality of medical service and tourism activities also recorded high, which forecasts higher consumer expectation for the product. As the result showing differences in consumer preference by the demographic segmentation, differentiated and segmented consumer needs should be considered when planing and managing a product. The scope of the study is limited to a demographic segmentation which is a basic stage of understanding consumer preference, therefore more detailed future researches on complicated and multi-dimensional consumer needs are required.