• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.43-43
• /
• 2011

현대인들은 생활환경에서 발생하는 각종 미세먼지 등의 입자상 오염물질 뿐만 아니라 각종 VOCs 등의 가스상 오염물질과 곰팡이, 박테리아, 바이러스 등 생물학적 오염물질까지 생활공간 내의 공기환경은 점점 악화 되고 있으며 공기 정화 등의 필요성이 증대 되고 있다. 이에 본 연구에서는 닥 펄프와 활성탄이 주성분인 Sheet를 Corrugation 장치를 통해 편파형(골판지)으로 제작하고, 다시 다층 구조로 적층된 골판지 sheet을 제작한 후 이를 두께 방향으로 일정 폭(20mm이하)으로 절단하여 필터부품의 소자로 이용하는 활성탄 필터의 제조 및 그 특성을 확인하고자 하였다. 닥펄프/펄프와 무기물의 혼합비, 해리시간 등의 변화를 주어 샘플을 만들었고, 강도, 평활성, 생산성 향상을 위해 첨가보조제 선정을 하였다. 이렇게 제조된 필터의 물리적 특성을 알아보고자 인장시험을 실시하였고, 주사전자현미경을 통하여 필터의 평활성과 표면을 관찰하였고 흡착성능 및 기능성을 VOCs 방출량, 탈취율, 항균도, 곰팡이 저항성 등의 실험을 통하여 알아보았다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.216-220
• /
• 2004

This paper is concerned with the development of stacked ceramic thin actuation layer IDEAL (InterDigitated Electrode Actuation Layer) using d$_{33}$ actuation mechanism of piezoelectric ceramic. Most of the thin piezoelectric actuators are operated with d$_{31}$ actuation mechanism. Many kinds of piezoelectric ceramic actuators are strived now to improve the actuation performance. One of efforts to improve performance of piezoceramic actuators is the research trying to develop an actuator using the piezoelectric coefficient d$_{33}$ . The piezoelectric coefficient d$_{33}$ is almost twice larger than piezoelectric coefficient d$_{31}$ . Therefore, the induced strain of PZT thin layer with d$_{33}$ 3 actuation mechanism is bigger than that with d$_{31}$ actuation mechanism. The AFC(MIT) and LaRC-MFC$^{TM}$ which is developed by a research team of NASA Langley Research Center used d$_{33}$ actuation mechanism with surface interdigitated electrode to enhance its actuation performance. But their actuation mechanism is not perfect d$_{33}$ actuation mechanism since the interdigitated electrodes are placed at the surface of the actuation layer. In this research, the stacked ceramic thin actuation layer with imbedded interdigitated electrode is designed and manufactured. The actuation strain of stacked ceramic thin actuation layer is measured and compared with the actuation strain of the LaRC-MFC$^{TM}$. The comparison shows that the developed stacked ceramic thin actuation layer can produce 15% more actuation strain than LaRC-MFC$^{TM}$.> TM/.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.19-26
• /
• 2021

The lattice structure is attracting attention from industry because of its excellent strength and stiffness, ultra-lightweight, and energy absorption capability. Despite these advantages, widespread commercialization is limited by the difficult manufacturing processes for complex shapes. Additive manufacturing is attracting attention as an optimal technology for manufacturing lattice structures as a technology capable of fabricating complex geometric shapes. In this study, a unit cell was formed using a three-dimensional coordinate method. The relative density relational equation according to the boundary box size and strut radius of the unit cell was derived. Simple cubic (SC), body-centered cubic (BCC), and face-centered cubic (FCC) with a controlled relative density were designed using modeling software. The accuracy of the equations for calculating the relative density proposed in this study secured 98.3%, 98.6%, and 96.2% reliability in SC, BCC, and FCC, respectively. A simulation of the lattice structure revealed an increase in compressive yield load with increasing relative density under the same cell arrangement condition. The compressive yield load decreased in the order of SC, BCC, and FCC under the same arrangement conditions. Finally, structural optimization for the compressive load of a 20 mm × 20 mm × 20 mm structure was possible by configuring the SC unit cells in a 3 × 3 × 3 array.

• Composites Research
• /
• v.35 no.2
• /
• pp.106-114
• /
• 2022

Carbon fiber-reinforced plastic, well known high specific strength and high specific stiffness, have been widely used in the aircraft industry. Mostly the CFRP structure is fabricated by lamination of carbon fiber or carbon prepreg, which has major disadvantage called delamination. Delamination is usually produced due to absence of the through-thickness direction fiber. In this study, three-dimensional carbon preform woven in three directions is used for fabrication of aircraft wing unit structure, a part of repeated structure in aircraft wing. The unit structure include skin, stringer and rib were prepared by resin transfer molding method. After, the 3D structure was compared with laminate structure through compression test. The results show that 3D structure is not only effective to prevent delamination but improved the mechanical strength. Therefore, the 3d preform structure is expected to be used in various fields requiring delamination prevention, especially in the aircraft industry.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.17-22
• /
• 2011

Ultimate goals in vehicle design can be summarized as environment-friendliness and safety. Along with these requirements, the importance of natural environment conservation has been focused lately. Therefore, reduced emission from vehicle and improved efficiency has become the top priority projects throughout the world. CFRP(Carbon Fiber Reinforced Plastics) of the advanced composite materials as structure materials for vehicles, has a widely application in lightweight structural materials of air planes, ships and automobiles because of high strength and stiffness. This study is to investigate the energy absorption characteristics of CFRP hat-shaped section members under the axial impact collapse test. The CFRP hat-shaped section members which manufactured from unidirectional prepreg sheets were made of 8plies. The axial impact collapse tests were carried out for each section members. The collapse mode and energy absorption characteristics were analyzed for CFRP hat-shaped section member according to the interface numbers(2, 3, 4, 6 and 7).

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.19-24
• /
• 1997

Composition and process conditions for low temperature sintered NiCuZn ferrites were investigated, so as to fabricate multilayered chip inductor. The$Fe_2O_3$ deficiency for low temperature sintering was decreased with NiO contents of NiCuZn ferrites. The permeability of NiCuZn ferrites can be controlled in the range of 12~562 with the variation of NiO and $Co_3O_4$ contents. The $Q_{max} $ frequency of NiCuZn ferrites was decreased from 50 MHz to 3 MHz linearly with permeability increase from 60 to 560. The relation between the $Q_{max}$ frequency(Y) and permeability(X) of NiCuZn ferrites was expressed with the following empirical equation, logY=4.2-1.4logX.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.8
• /
• pp.1-7
• /
• 2019

Materials that can be used for 3D printing have been developed in terms of phase and functionality. Materials should also be easily printed with high accuracy. In recent years, the concept of 4D printing has been extended to materials whose physical properties such as shape or volume can change depending on the environment. Typically, such high-performance 3D printing materials include bio-inks and inks for sensors. This study deals with the optimization of the manufacturing method to improve the functional properties of the pressure sensitive material, which can be used as a sensor based on change of the resistance according to the pressure. Specifically, the number of milling for dispersion, the ratio of hardener for controlling elasticity, and the content of MWCNTs were optimized. As a result, a method of manufacturing a highly sensitive pressure-sensitive ink capable of use in 3D printing was introduced.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.39.1-39.1
• /
• 2010

이종접합태양전지는 단결정 실리콘 기판 표면에 고품질 비정질 실리콘층을 적층함으로써 전기의 근원인 전하의 재결합 손실을 줄여 높은 개방전압을 얻을 수 있다는 특징이 있다. 초박형 태양전지는 기존 태양전지보다 뛰어난 광전변환 특성(Photovoltaic characteristic)을 가지고 두께가 얇아 제품 형상 시 자유도가 높아진다. 본 논문에서는 n-type Bare wafer($160{\sim}180{\mu}m$)를 이용하여 $50{\mu}m$의 웨이퍼를 제작하였다. a-Si:H(p)_a-Si:H(i)_c-Si(n)의 광흡수층 구조를 성막하여 cell을 제작하였다. 그 결과 Voc(Open Circuit Voltage)가 0.666, Jsc(Short-Circuit Current)가 34.77, FF(Fill Factor) 69.413, Efficency 16.07%를 달성했다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.478-481
• /
• 2004

This study presents the combined effect of electric Held application and mechanical compressive stress loading on deformation in a multilayer ceramic actuator, designed with stacking alternatively 0.2(PbMn$\_$1/3/Nb$\_$2/3/O$_3$)-0.8(PbZr$\_$0.475/Ti$\_$0.525/O$_3$) ceramics and Ag-Pd electrode. The deformation behaviors were thought to be attributed to relative 180$^{\circ}$domain quantities which is determined by pre-loaded stress and electric field. The non-linearity of piezoelectricity and strain are dependent upon the young's modulus resulting from the domain reorientation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.11
• /
• pp.702-706
• /
• 2014

A comparative study has been attempted for microwave and conventional sintering of lead-free $Bi_{0.5}Na_{0.5}TiO_3(BNT)$-based multilayer ceramic actuators(MLAs). It was found that microwave sintering (MWS) could be successfully applied to the co-firing of piezoceramic/AgPd MLAs with a 10 times shorter firing cycle as well as $100^{\circ}C$ lower firing temperature ($850^{\circ}C$) for sufficient densification than conventional furnace sintering ($950^{\circ}C$). Furthermore, MWS-derived specimens showed better electric field-induced strain than that of CFS-derived specimens by effectively suppressing interdiffusions between ceramic and electrode layers.