• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.597-606
• /
• 2015

Until now, u-turn lane installation methods have been studied variously. But, There is no specific standard yet. This study ranges are commercial area in Incheon metropolitan city through field investigation and presents specific design standard for efficient operation of left turn using a field data through calculating relevant permitted u-turn lane length and minimum separation distance from the front intersection to starting point of permitted u-turn lane in urban signalized intersections in commercial area. Relevant permitted u-turn lane length is found to be 32m and minimum separation distances from the front intersection to starting point of permitted u-turn lanes are 72m, 40m, 24m in case of 1 left turn lane, 2 left turn lanes and 3 left turn lanes respectively. By comparing result values and field data, they had a large difference under the similar situations in their lengths. This result is caused of no specific standard about design of u-turn lanes. If results of this study applied to design of u-turn lanes, signalized intersections in urban commercial areas would be operated more safety and efficiently.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1999-2007
• /
• 2013

The key characteristics of two-lane-and-two-way traffic flow are platoon and overtaking caused by low-speed vehicle such as truck. In order to develop two-way traffic flow model comprised of CF(car-following) and overtaking model, it is essential to develop a car-following model which is suitable to two-way traffic flow. Short distance between vehicles is caused when a high-speed vehicle tailgates and overtakes foregoing low-speed vehicle on two-way road system. And a vehicle following low-speed vehicle decides to overtake the front low-speed vehicle using suitable space within the headway distribution of opposite traffic flow. For this reason, a two-way CF model should describes not only running within short gap but also headway distribution. Additionally considering domestic two-way-road size, there is a on-going need for large-network simulation, but there are few studies for two-way CF model. In this paper, a two-way CA model is developed, which explains two-way CF behavior more realistic and can be applied for large road network. The experimental results show that the developed model mimics stop-and-go phenomenon, one of features of congested traffic flow, and efficiently generates the distribution of headway. When the CF model is integrated with overtaking model, it is, therefore, expected that two-way traffic flow can be explained more realistically than before.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.109-126
• /
• 2014

The level of service (LOS) of the Highway Capacity Manual (KHCM) has been used as a basic criterion at decision making processes for signalized intersections in Korea. The KHCM provides five steps for the signalized intersection analysis. Among them, lane grouping, which is the third step, significantly influence the final LOS. The current method presented in the KHCM, however, classifies a shared lane as a de facto turning lane group, even though the turning traffic of the shared lane is few. Thus, this research was initiated to provide an alternative. To this end, three alternatives were suggested, including the method based on the lane grouping presented in the U.S. Highway Capacity Manual, the method using turning ratio of shared turning lane, and the method using a threshold traffic volume in lane grouping. The feasibilities of the three methods were evaluated using a calibrated CORSIM model. Conclusively, the method using a threshold traffic volume in lane grouping outperformed.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.7-14
• /
• 2006

Most researches about rumble strips have Presented only the before-and-after analysis of the accidents. So, Researchers have not dealt with the estimation of rumble strip's effectiveness on the driver's alertness. In this study. the effectiveness of the rumble strips on the driver's alertness was estimated by measuring the bio-signal transmitted from the driver. The bio-signal acquired for this experiments were theta wave in central lobe. The experimental results revealed that the theta waves as measured form the drivers's head while in the rumble strip section differed from those while in non-rumbled section; 74 percent decrease in theta wave value, respectively. This fact finding could mean that the driver's alertness increased from 74 percent while in the rumble strip section of the road. In all five trials of driving experiments on the rumble strip section, all the drivers showed the best alertness as measured by the theta waves in the first driving trial.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.17-27
• /
• 2011

This paper investigates some critical errors influencing travel demand estimation in Korea Transportation Data Base (KTDB), and through this investigation reasonable traffic analysis zone (TAZ) size and internal trips ratio are analyzed. With varying zone size, the accuracy of travel demand estimation is studied and appropriate level of zone size in KTDB is also presented. For this purpose zonal structure consisting of location of zone centroid, number of centroid connecters has been constructed by social economic index, and then some descriptive statistical analyses such as F-test, coefficient of correlation are performed. From the results, this paper shows that the optimum levels of zone system were various according to the order and capacity of roads, and also shows that the smaller TAZ, the less error in this research. In conclusion, in order to improve accuracy of traffic demand estimation it is necessary to make zone size smaller.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.131-143
• /
• 2010

This study has aimed to develop accident modification factor(AMF) for rural two-lane roadway segments. Accident Modification Factor is a coefficient to assess roadway safety as reflecting characteristics of homogeneous roadway. It estimates accident frequency of roadway segments with developed base model and exposure. We found on items of such factors as crosswalk, driveway density, topography characteristic, land use and median through statistical models and literature review. To develop accident modification factors, we used statistical model methods and analyses of applicability and expert judgement method were practiced to validate it. Although expert judgement for land use item was questionable, most items were rated acceptable. Result of comparative analysis revealed crash frequencies of IHSDM and KHSEM were most similar with actual. However, accident distribution of KHSEM was more proper than IHSDM. Also overall estimated values of RSDS were found to be overestimated.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.488-496
• /
• 2015

The main reason to install pedestrian pushbuttons is improving traffic operations. The current guideline for the installation of signal systems with pedestrian pushbuttons is car-oriented. It is difficult to clearly understand the guideline because there isn't an in-depth study to compare the pros and cons of the pedestrian- and vehicle-oriented methods in terms of waiting time. Thus, this study aims to estimate the waiting times of pedestrians and vehicles. The two delay times are compared considering the hypothetical circumstances such as geometry, pedestrian crossing time, pedestrian/vehicle counts and arrival distribution. The results show that when the pedestrian traffic volume exceeds 97 ped/h in the case of a two-lane road (one lane in each direction) the pushbutton system is effective and beneficial to pedestrians. It means that the total waiting time of pedestrians is less than the one of vehicles. Additional four scenarios are designed and tested by varying the number of lanes and design speeds. In conclusion, the pushbutton signal is more beneficial for pedestrians when the number of pedestrians is less than or equal to 85, 70, and 70 ped/h for the three-lane scenario, the four-lane with the design speed of 80km/h scenario, and the four-lane with the design speed of 100km/h, respectively.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.6
• /
• pp.16-26
• /
• 2020

Road Pavement Maintenance Work is generated in a variety of different field conditions, and it is difficult to calculate the construction cost because there are no detailed criteria when preparing the estimated construction cost. Unlike new pavements, Road Pavement Maintenance has to be constructed with operating vehicles, and there are many differences in productivity depending on urban areas, limited work hours, night-time, construction area, etc. To compensate for this, the standard for calculation of construction cost provides additional charges for the number of lanes, residential areas, working hours, and night work, but it applied differently depending on construction officials. In this study, construction cost estimation standards that can properly reflect the conditions of the site was investigated for major types of Road Pavement Maintenance work. The site was investigated and analyzed mainly for many construction sites with 'overlay of asphalt after cutting', 'restore surface', 'repair of pavement', and 'recovery of roadway'. The criteria for the application of construction volume separately according to working hours, public places, and land area including extra charges for basic downtown and residential area. The hours of operation were divided into three types(7 hours, 5 hours, 3 hours) excluding movement and preparation time, and each type provided a coefficient for dividing the area of the construction site into five types. The construction cost calculation method based on the construction purpose is site conditions is proposed accordingly, and it is deemed that a plan for the designer to calculate the construction cost has been prepared in consideration of the site conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.65-72
• /
• 2011

When an expressway intersects another expressway, a unique connector needs to be designed between the two consecutive exit ramps. In such a case, it is important to design a connector such that there is enough distance for drivers to find their way safely. A current design manual in Korea prescribes the minimum length of the connector as 240 m. In this research, we have suggested a method for calculating the minimum length of a connector in order to check the feasibility of the currently prescribed length. For this purpose, we have attempted to determine the total perception-reaction time and lane-changing time required by a driver. For determining the driver's perception-reaction time, we have used the driver's decision time in addition to the conventional 2.5 s of perception-reaction time for stopping sight distances. We have considered both the design speed and the average travel speed for the calculation of the length. To evaluate the accuracy of the new method, we have chosen four sites on expressways for which relatively high accident rates were recorded. As a result, we could verify that the current limit (240 m) was sufficient for drivers to be able to change lanes in the given specific geometry. However, the prescribed limit should be revised in case the drivers' decision time is considered to be their perception-reaction time. All new approaches for calculating the ideal length of a connector have been carried out by taking into account the design speed as well as the average travel speed. Owing to the characteristics of the specific geometry for two consecutive exit ramps and the large difference between the design speed and the average travel speed in the objective areas, it is more realistic to use the proposed method by keeping the decision time equal to a driver's perception-reaction time, in order to determine the ideal distance that should be maintained between two consecutive exit ramps.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.609-611
• /
• 2018

In this study, MBTI personality type test was conducted for high school students in engineering, and then programming class was conducted to analyze students' learning attitudes. To do this, we designed learning based on creative problem solving model and integrated thinking model. Students classify I (introvert) type and O (extrovert) type as a primary and T (thinking type) and P (cognitive type) as secondary. As a result of this study, learning motivation factors according to personality type were found. Therefore, in future research, we want to study the change of learning method according to learner personality type.