• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1421-1433
• /
• 2014

In this study, appropriate probability distribution and parameter estimation method were selected to perform snowfall frequency analysis. Generalized Extreme Value (GEV) and Probability Weighted Moment Method (PWMM) appeared to be the best fit for snowfall frequency analysis in Korea. Snowfall frequency analysis applying GEV and PWMM were performed for 69 stations in Korea. Peak snowfall corresponding to recurrence intervals were estimated based on frequency analysis while snow loads were calculated using the estimated peak snowfall and specific weight of snow. Design snow load map was developed using 100-year recurrence interval snow load of 69 stations through Kriging of ArcGIS. The 2009 Korean Building Code and Commentary for design snow load was assessed by comparing the design snow loads which calculated in this study. As reflected in the results, most regions are required to increase the design snow loads. Thus, design snow loads and the map were developed from based on the results. The developed design snow load map is expected to be useful in the design of building structures against heavy snow loading throughout Korea most especially in ungaged areas.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2703-2714
• /
• 2002

In this work, energy absorption characteristics and optimal welding space of spot-welded square hat type tube are investigated via quasi-static crush experiments and finite element (FE) analyses. A FE model reflecting the crush characteristics is established based on the experimentally observed crush mechanisms of specimens with welding spaces (20, 30 & 45 mm) and (25,40 & 55 mm) respectively for two specimen widths (60, 75 mm). The established FE model is then applied to other crush models of widths (50, 60 & 75 mm) with various welding spaces (20, 25, 30, 40, 45, 55, 75, 150, 300 mm) respectively. We examine the energy absorption characteristics with respect to the welding space for each specimen width. The outcome suggests an optimal spot welding space of square hat type thin-walled tube. Energy absorption is also presented in terms of yield strength of base metal, specimen thickness, width, and mean crushing force of spot-welded square hat type thin-walled tube.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.79-86
• /
• 2008

This paper proposed the appropriate installation angle of skewed sensors for measuring vehicle wandering data, which are collected to figure out the location of dynamic weight of a moving vehicle on roadways. We developed a device using tape-switch sensors and a computer program and collected vehicle wandering data with the device and probe vehicles. As a result, the steeper the skewed sensor was installed, the lower the error was shown. However, we could not collect proper data when a skewed sensor was set up higher than $30^{\circ}$ due to tandem axle. Therefore, this study suggested the appropriate angle of skewed sensors as a degree of $20^{\circ}$ to $25^{\circ}$ for gathering wandering data.

• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.25-27
• /
• 2005

본 연구의 목적은 환경변화의 영향으로 증가된 풍압에 대하여 선간단락고장을 예방할 수 있는 시설기준의 정립에 있다. 본 연구에서는 증가된 풍압 대비 특고압 ACSR/AW-OC(알루미늄피복 강심 알루미늄 절연전선)의 전 규격에 대한 선간거리별 최대이도를 계산하였고, 풍압지역별 임계경간 및 적용하중조건, 표를 고안하였으며, 이를 이용하여 기준이도 및 지역별 하중조건 적용 시의 최대경간을 최종적으로 도출하여 표로 고안하여 가공배전선로 설계자가 설계경간에 따라 적정 완철길이 및 전선이도를 결정할 수 있도록 하였다.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.6
• /
• pp.185-193
• /
• 1997

본 연구는 각종 제진재료를 이용하여 진동을 억제할 수 있는 콘크리트를 개발하여 각종 건설공사에서 흔히 발생할 수 있는 진동공해문제를 억제하고자 하며 아울러 폐기물의 재활용차원에서 폐자재를 이용하여 유용한 제진콘크리트를 개발하고자 하는데 그 목적이 있다. 우선, 제진재료를 이용한 압축강도 (200kg/$\textrm{cm}^2$)이상의 콘크리트 배합비를 찾기 위하여 24배치의 예비실험을 수행하였으며, 선정된 적정배합비에 따른 제진재료를 이용한9개의 진동시험체보를 제작하여 보의 구조적 및 재료적 동적특성 즉 1차 공명진동수와 동적 휨강성 및 감쇠비를 측정하여 제진효과를 조사하였다. 그리고 압축강도에 의한 각 시험체의 균열모멘트를 추정하여 재하하중과 균열모멘트비(M/Mcr)에 따른 하중단계별 동적특성값을 살펴보았다. 제진재료로서는 라텍스(Latex), 고무분말(Rubber Powder)그리고 플라스틱 레진( Plastic Resin)등을 사용하였고, 재료적, 구조적 진동감쇠효과를 파악하고자 KS F2437규정과 진동파의 속도법을 사용하였으며, 감쇠비 측정은 Frequency Spectrum 곡선에 대한 Polynomial Curvefitting 방법과 기하학적 해석방법을 이용하여 각각의 결과를 비교.분석하였다.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.179-186
• /
• 2010

The bond between steel and concrete in reinforced concrete members is essential to resist external load, but the bond mechanism in reinforced concrete beams deteriorated by steel corrosion has not been clearly known yet. Most existing researches have dealt with the bond behavior of corroded steel under monotonic loading, but scarce are researches dealing with bond behavior of corroded steel under repeated loading. This study includes the experimental investigation on the bond behavior with respect to the various degrees of steel corrosion under repeated loading. According to the test results, the bond strength of corroded steel under monotonic loading increases as the rate of steel corrosion increases unless the splitting crack occurs. The slip versus number of load cycles relation was found to be approximately linear in double logarithmic scale, not only in specimens without steel corrosion but also in specimens with steel corrosion. The test results also show that the steel corrosion does not negatively affect the bond strength of corroded steel after repeated loading unless the splitting crack occurs. But the fatigue life decreases sharply after splitting crack occurs. This research will be helpful for the realistic durability design and condition assessment of reinforced concrete structures.

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.48-54
• /
• 1998

The effect of coating thickness on the contact fracture was studied, in Si3N4 coated Si3N4-BN system When the elastic/plastic mismatch is relatively large betwen two layers in bilayer certain critical coating thickness was required to prevent cone crack initiation and this critical thickness was decreased by de-creasing the elastic/plastic mismatch,. In addition the required critical thickness should be increased when higher loads apply. In conclusion an appropriate coating thickness should be designed by elastic/plastic mismatch between two layers and environment (applied load) to prevent the coating fracture

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.870-873
• /
• 2008

레일패드는 궤도전체의 탄성확보 뿐만 아니라 열차하중에 의해 침목으로 전달되는 충격을 완화시켜 침목과 도상의 파손을 방지하는 역할을 하는데, 통과톤수의 증가와 기후적 요인에 의하여 패드가 열화되면 패드의 강성이 증가하게 된다. 패드의 강성이 증가하게 되면 레일을 통해 침목으로 전달되는 충격하중이 증가하게 되어 침목의 파손을 유발할 수 있을 뿐만 아니라 침목하면의 도상에도 과도한 충격하중을 전달하여 도상의 손상을 가속화시킬 수 있다. 또한 레일패드의 강성변화는 궤도의 소음과 레일의 파상마모의 진전에도 영향을 미치게 된다. 따라서 레일패드의 공용기간 중에 적정한 강성을 유지할 필요가 있으며, 통과톤수의 증가에 따른 레일패드의 경화도를 산정하는 방법과 레일패드의 경화가 궤도에 미치는 영향을 정량적으로 분석하여 레일패드의 교체주기에 관한 기준을 마련할 필요가 있다. 본 연구에서는 슬래브의 질량과 일정속도대역에서의 패드강성의 민감도분석을 하여 그 결과를 비교하고 레일패드경화에 따른 대상궤도의 동적거동을 수치해석을 통하여 패드강성과 차량주행속도에 따른 윤중의 변동량과 레일의 변위, 가속도 그리고 침목의 변위, 가속도의 변화정도를 분석해 보았다. 궤도시스템의 동적해석을 위한 해석 프로그램으로는 네덜란드 델프트 공과대학에서 개발된 궤도시스템 전용 해석 프로그램인 DARTS(The dynamic analysis of a rail track structure)를 사용하였다. 대상궤도는 국내 1단계 경부고속철도에서 사용되고 있는 3중보 무도상궤도를 사용하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.4
• /
• pp.15-23
• /
• 2021

Various micropiles have been developed through research related to micropiles, which have been carried out with the increased use of micropiles. Among the micropile construction methods being developed, the triaxial micropile (tmp), which is recently developed for the purpose of increasing the horizontal bearing capacity (seismic resistance), is representative. The three-axis micropile has the advantage of a method that can resist horizontal load more effectively because three micropiles installed inclined on each axis resist horizontal load. However, there is a problem in effectively using this pile method due to insufficient research on the support characteristics of the triaxial group micropile. In order to effectively utilize the triaxial group micropile (tmp), it is required to evaluate the bearing capacity for the factors that affect the horizontal bearing capacity of the pile. Therefore, in this study, field horizontal loading Tests were performed for each load direction, field loading Tests were verified through three-dimensional finite element analysis, behavioral characteristics of triaxial micropiles were evaluated, and appropriate horizontal bearing capacity was analyzed in consideration of horizontal load directions.

• Journal of the KSME
• /
• v.44 no.6
• /
• pp.53-58
• /
• 2004

일반적으로 사용단계의 구조물은 시간이 경과함에 따라 초기의 설계, 시공상 오류에 의한 초기결함, 반복하중 그리고 취약한 환경 등 외부 조건에 노출될 경우에는 구조물 본연의 성능을 점차 상실하게 되어 심지어는 인명과 재산권을 위협하는 대형 붕괴사고를 일으키기도 한다. 따라서 구조물의 사용성을 적정 수준 이상으로 유지하기 위해서는 정기적인 점검을 통해 잔존수명을 미리 예측하여야 함은 물론, 최적의 보수시기와 보수방법을 알려줄 수 있는 시설물 모니터링시스템이 요구되고 있다. (중략)