• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.75-78
• /
• 2014

Discussion of the validity of the software price has been constantly followed in it. For interests friendly relations between the supply provider and consumers, suitable pricing logic is required to convince each other in the market. However, in reality, not only there is no exact calculation standard of the factors that determine the price still, and also lack understanding of the factors. The fact is that by this, each supply company has a software pricing by different criteria, so consumers keep questioning It's a reasonable price. In this paper, it is intended to analyze a variety of factors that influence to the software price and base on this determine a reasonable price formula model of software packages.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.109-116
• /
• 1998

Treatability tests of a soil washing device were performed for the remediation of eil-contaminated soil. The contaminant-containing soil with water was first fed into a oc-current screw conveyor and then into a counter-current washer. Surfactant was introduced into the washer and feeding soil was continuously separated on the basis of #40 mesh at the same time. A washing efficiency of 97.9% was achieved by the the soil washing device optimized.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.3
• /
• pp.3-13
• /
• 2001

The behavior of the masonry lining is studied to gain basic information on how to reinforce the masonry tunnels. Apart from the previous works on the masonry structures, the multi-course masonry structure, realistic in field condition, is considered and the constitutive relationship of the masonry is, therefore, established. The design charts of the orthotropic material properties are proposed according to the stiffness ratio and the crack initiation and subsequent propagation model is also considered to model the brittle nature of the masonry. A numerical analysis on the masonry panel is investigated to verify the proposed model and future works of the masonry lining are briefly explained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.39-39
• /
• 2010

인공위성이 임무를 수행하는 우주환경은 지상 환경과 달리 고진공 및 극저온의 극한환경으로 지상에서는 제대로 작동하는 것으로 관찰되더라도 우주환경에서는 예상하지 못한 기능장애를 일으켜 위성의 성능에 치명적인 영향을 미치기도 한다. 이에 10-5 torr 이하의 고진공과 $-180^{\circ}C$ 이하의 극저온 환경을 지상에서 모사하여 위성체의 안정성 및 신뢰성을 시험한다. 한국항공우주연구원에서 보유한 각종 우주환경모사용 챔버들은 설치 후 10년 이상 가동한 노후 장비들로 적정 성능을 지속적으로 유지하기 위하여 기본이 되는 진공 펌프들의 교체 작업을 수행하였다. 특히, 기존 사용하던 저진공펌프 중 oil type의 rotary vane 펌프를 dry 펌프로 교체하였으며, 배기 전 준비과정에 많은 시간이 소요되는 cryo 펌프를 turbo-molecular 펌프로 교체하였다. 본 논문에서는 펌프 교체 전 적정 사양 선정을 위한 준비과정 및 펌프의 교체 및 그 결과에 대해 기술한다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.463-465
• /
• 2003

전기분해에 의한 부상현상을 이용하여 유류로 오염된 토양 세정 후 발생되는 유출수 중 유분 등을 분리하기 위한 적정 운전조건을 찾고자 하였다. 전기분해 반응조(200 $\times$ 10 $\times$15cm)에 혼합 계면활성제 (POE5 : POE14, 1:1) 1% 용액에 디젤을 1,000mg/L 농도로 용해시켜 실험하였다. 양극에는 티나늄 코팅전극, 음극으로는 스테인레스 스틸전극을 이용하였다. 반응시간은 62분( 반응: 60분, 부상시간: 2분) 이었으며 전압은 6V였다. 전해질 첨가에 의한 영향을 알아보기 위하여 실험한 결과, 전해질을 첨가하였을 경우 첨가하지 않았을 때보다 40% 정도의 효율이 증가하였다. 적정 전해질, 주입농도 및 반응시간을 알아보기 위하여 1N NaCl과 NaOH의 농도를 변화시켜 가면서 실험하였다. NaCl의 경우 더 좋은 효율을 나타내었다. 전해질의 농도는 0.2 - 1.0% 의 농도 범위에서 NaCl와 NaOH 모두 농도에 따라 순차적으로 효율이 증가하였다. 두 전해질 모두 0.4 - 1.0% 농도 범위에서 평형에 도달하는 시간은 20분으로 나타났다.

• Journal of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.313-316
• /
• 1969

In this paper a simple and rapid method is described for the determination of lead in monazite. A monazite sample was dissolved with hot concentrated sulfuric acid and diluted to 200 ml with distilled water. Lead is quatitatively separated by coprecipitating with strontium. Lead-strontium sulfate is dissolved in 3N NaOH soluion. An excess Zn-EDTA is added. The remaining zinc ion is titrated with standard 0.01 M EDTA solution using xylenol orange as indicator at pH 5 in the presence of KCN and acetyl acetone as masking agents.

• Journal of Aquaculture
• /
• v.12 no.1
• /
• pp.47-56
• /
• 1999

Denitrification by anaerobic bacteria is one of the most common processes of removing nitrate from recirculating aquaculture systems. This process is affected by many factors such as external carbon sources, hydraulic retention time (HRT), and $COD/NO_3-N$ ratio. Although external organic carbon sources are essential for the denitrification process, these also contribute to increase dissolved organic carbon concentration in recirculating aquaculture systems. So these external organic carbons must be removed from the systems. This study was conducted to find out the optimum operating conditions for the removal of external organic carbons in a submerged denitrification biofilter. Combinations of two external carbon sources (glucose and methanol), two HRT (4- and 8-hour), and four different C:N ratios (3, 4, 5, and 6) were used in this experiment. The removal efficiencies of organic carbon sources at 8-hour HRT were always better than those at 4-hour's (P<0.05). Maximum removal efficiencies were achieved when C:N ratio was 5 in both glucose and methanol. The removal efficiencies of methanol were always better than those of glucose. The maximum removal efficiencies of glucose and methanol were 76.5% and 84.0%, respectively and the removal rates were 223.5 $g/m^2/day$ and 247.1$g/m^2/day$. The maximum removal rates of glucose (290.9 $g/m^2/day$) and methanol (355.6 $g/m^2/day$) were achieved at 4-hour HRT and 5 C:N ratio. But the concentrations of SCOD in the effluent of both glucose ($52.5 mg/\ell$) and methanol ($40.9 mg/\ell$) were too high for rearing fish. Therefore, the optimum operating conditions for the removal of external carbon in a submerged denitrification biofilter were 8-hour HRT and 5 C:N ratio. And methanol showed better efficiency as an external carbon sources.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.59-65
• /
• 1981

The purpose of the present study is to find the light intensity which induces maximum gathering rate and to observe the variation of the gathering rate both in daytime and at night by rising two species of commercial fishes: gray rock cod. Sebastes inermis (Cuvier et Valenciennes) and cat shark, Scyliorhinus torazame (Tanaka). An experimental tank $(360L\;{\times}\;50W\;{\times}\;55H\;cm)$ was set up in a dark room. An illumination system was attached to one end of the tank to control horizontal light intensity. Six artificial light sources were prepared by combination of two light bulbs (5W, 150W) and seven filters. During the experiment water depth was maintained 50 cm level in the tank. The tank was marked into six longitudinal sections each being 60 cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 40 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted 40 times every 30 seconds, and the gathering rates were obtain from the average number of fish in each section. The light intensity inducing maximum gathering rate is as follows: gray rock cod: 16.6 lux (10.6-24.5 lux) (day), 0.7 lux (0.5-1.1 lux) (night), cat shark: 1.9 lux (1.2-2.9 lux) (day), 16.6 lux(10.6-24.5lux) (night). Trend of the gathering rate in illumination time revealed different results in two fish species. Gathering rate of gray rock cod did not show any definite pattern but fluctuated irregularly. The gathering rate was some fluctuating at night. However, that of cat shark was almost constant and did not show any distinctive difference between day and night.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.148-162
• /
• 2023

The objective of this study is to derive the appropriate perception location for changes in driving behavior of autonomous vehicles in urban road environments based on traffic safety signs. For this purpose, 32 types of signs that induce changes in driving behavior were selected from currently used traffic safety signs and classified as three types according to changes in driving behavior. Based on this, three scenarios were designed: stop, speed change, and lane change scenarios. These were used to confirm the impact on traffic flow. As a result of the analysis, it was found that each scenario needs to receive information on traffic safety signs in advance to ensure changes in traffic flow and safety. Consequently, the appropriate perception location can be used as a basis for establishing standards for delivering message sets to autonomous vehicles or revising traffic safety signs for them. In addition, this study is expected to contribute to the establishment of safe and efficient driving strategies on urban roads as autonomous vehicles are introduced in the future.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.2
• /
• pp.157-162
• /
• 1996

Experiments were conducted from 1994 to 1995 to understand the effects of the labor-saving seeding and planting density on growth and root yield of Astragalus membranaceus. The drilling seeder reduced seeding time than the hand seeding; It takes 3. 5hrs/l0a to seed by drilling seeder while 33. 0hrs/l0a by hand seeding, which labor reducing rate was 89. 4 %. Emergence rate in the drilling seeder was increased 17% than in the hand seeding, so the root yield were increased 23% to 136. lkg/l0a in using drilling seeder compared to 110. 3kg in hand seeding. On the effect of planting density on the growth characteristics plant height was long in dense planting and stem diameter was thick in spacious planting. Root diameter and dry root weight root per plant were decreased in dense planting and root yield was highest in optimum planting densities $(6\;row\;(15cm)\;{\times}\;10cm)$ in the harvest of 1 year old plants in Astragalus membranaceus. The gross profit were increased 23% to 1,933 thousand won per l0a in the drilling seeder compared to 1,566 thousand won in the hand seeding, also the managing costs were reduced 18% to 406 thousand won per l0a in the drilling seeder than 494 thousand won per l0a in the hand seeding.