• Journal of Sericultural and Entomological Science
• /
• 제44권2호
• /
• pp.87-92
• /
• 2002

Dissolution of Antheraea pernyi silk fiber was carried out in a zinc chloride solution with various dissolving conditions. The solubility was significantly dependent on the concentration of zinc chloride, dissolving temperature and time. The proper conditions of dissolution were found as 8 M zinc chloride, 70$^{\circ}C$ temperature and 30 min dissolving time. Regenerated A. pernyi silk fibroin powder was obtained through dialysis. FTIR and XRD showed that regenerated A. pernyi silk powder was composed of a ${\beta}$-sheet as well as an ${\alpha}$-helix conformation.

• Journal of the Korean Chemical Society
• /
• 제39권7호
• /
• pp.501-507
• /
• 1995

The electronic structure of cis-$[Cr(cyclam)Cl_2]Cl$ has been investigated by the emission and excitation spectroscopy at 77K, and infrared and visible spectroscopy at room temperature. The ten electronic transitions due to spin-allowed and spin-forbidden are assigned. The zero-phonon line in the excitation spectrum splits into two components by $139\;cm^{-1}$, and it can be reproduced by modern ligand field theory. According to the results of ligand field analysis, we can confirm that nitrogen atoms of the cyclam ligand have a strong ${\sigma}$-donor character, but chloride ligand has weak ${\sigma}-$ and ${\pi}-$donor properties toward chromium(III) ion.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제41권1호
• /
• pp.29-34
• /
• 2021

Near infrared reflectance spectroscopy (NIRS) is routinely used for the determination of nutrient components of forages. However, little is known about the impact of sample preparation and wavelength on the accuracy of the calibration to predict minerals. This study was conducted to assess the effect of sample preparation and wavelength of near infrared spectrum for the improvement of calibration and prediction accuracy of Calcium (Ca) and Phosphorus (P) in imported hay using NIRS. The samples were scanned in reflectance in a monochromator instrument (680-2,500 nm). Calibration models (n = 126) were developed using partial least squares regression (PLS) based on cross-validation. The optimum calibrations were selected based on the highest coefficients of determination in cross validation (R2) and the lowest standard error of cross-validation (SECV). The highest R2 and the lowest SECV were obtained using oven-dry grinded sample preparation and 1,100-2,500 nm wavelength. The calibration (R2) and SECV were 0.99 (SECV: 468.6) for Ca and 0.91 (SECV: 224.7) for P in mg/kg DM on a dry weight, respectively. Results of this experiment showed the possibility of NIRS method to predict mineral (Ca and P) concentration of imported hay in Korea for routine analysis method to evaluate the feed value.

• Analytical Science and Technology
• /
• 제5권3호
• /
• pp.285-294
• /
• 1992

Structures of dimers of the acetonitrile and DMF diluted by carbon-tetrachloride and xenon matrices at 80K were studied with infrared absorption spectroscopy. Sample and matrix materials were codeposited onto a KBr cold trapping window. Infrared absorption spectra of pure samples and diluted samples were compared to explain the structures of dimers. The acetonitrile dimer showed the antiparallel shape and the DMF dimer showed the linear shape. After annealing, the infrared spectrum of the diluted sample showed the same shape with that of the pure sample.

• Journal of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.3-13
• /
• 1987

Infrared absorption spectra of alkyl alcohols in the OH stretching region were obtained from varying the concentrations of alcohols in $CCl_4$. The OH stretching bands were broadened and shifted to lower frequencies due to the hydrogen-bond formation. Three bands were obtained from the breakdown of these bands by the simplex method. Each band was assigned to various types of hydrogen-bonded OH groups. The electronic structures and interaction energies of dimeric and trimeric alcohols were calculated by semi-empirical MO(CNDO/2, INDO) methods. These results were in good agreement with those of deconvoluted ir spectra. The EDA(electron donor-acceptor) effect of alkyl group on hydrogen-bond formation was in the decreasing order of butyl > propyl > ethyl > methyl group. On the other hand, the experimental results were in the order : propyl > ethyl > butyl > methyl group. This seemed to be ascribed to the bulkiness of butyl alcohol.

• Journal of the Korean Chemical Society
• /
• 제39권8호
• /
• pp.611-616
• /
• 1995

Oxovanadium(IV) complexes with salicylaldoxime, o-vanilline oxime, 2-hydroxy-4-methoxybenzaldoxime, 2-hydroxy-5-methoxybenzaldoxime and 2-hydroxy-5-nitrobenzaldoxime were synthesized. The complexes have been characterized by elemental analysis, electric conductivity measurement, infrared spectrometry, electronic spectrometry, mass spectrometry, and thermal analysis. The results of elemental analysis were well coincided with the theoretical values. The values of molar conductance of the complexes in DMF implicated that the complexes were non-electrolyte. The characteristic stretching frequency of V=O appeared strong band in the range of $980{\pm}20\;cm^{-1}.$ All the complexes showed two d-d transition in visible spectra and two charge transfer transitions in ultraviolet spectra. Results of mass spectrometry of $VO(sal)_2\;and\;VO(van)_2$ indicated two peaks corresponding to vanadium containing ion(I) of 1 : 2(metal to ligand) chelate and a fragment ion(II) of 1 : 1 chelate due to loss of ligand radical from ion(I). The thermal analysis showed the endothermic peak due to the thermal decomposition.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.173-179
• /
• 1997

출발원료로 ferric nitrate, ethylene glycol, acethyl acetone 혼합용액을 사용하여 dip-coating된 $\alpha$-Fe$_2$O$_3$막을 제조하였다. coating을 위한 혼합용액의 시간의 경과에 따른 용액내의 가교(polymerization) 효과를 관찰하기 위해서 적외선 분광기(FT-IR)을 사용하였고, 막 형성 시 유기물 분해 및 결정화 시작 온도를 확인하기 위하여 FT-IR, XRD, DSC 등을 이용하여 분석을 행하였다. 또한 각 조건에서 제조된 막은 X-선 회절 분석을 통해 결정상을 확인 하였으며, SEM을 통하여 막의 두께 변화에 대하여 관찰하였다.

• Journal of the Korean Chemical Society
• /
• 제21권3호
• /
• pp.161-170
• /
• 1977

Several Pt(II) complexes containing glycine (or glycino anion) and styrene have been prepared, and their structures have been confirmed by infrared spectroscopy. The results confirm the structure of chloro(glycino)(styrene)platinum(II) in which the nitrogen atom of the chelated glycino anion is coordinated to the platinum in the trans position to styrene (N-trans isomer).

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.112-121
• /
• 2010

In this study, styrene butadiene rubber(SBR)/organoclay nanocomposites were manufactured using the latex method with 3-aminopropyltriethoxysilane(APTES) as a modifier. The X-ray diffraction(XRD), transmission electron microscopy(TEM) images, Fourier transform infrared(FTIR) spectroscopy, swelling ratio and mechanical properties were measured in order to study the interaction between filler and rubber according to the mixing temperature in the internal mixer. In the case of SBR/APTES-MMT compounds, the dispersion of the silicates within the rubber matrix was enhanced, and thereby, the mechanical properties were improved. The characteristic bands of Si-O-C in APTES disappeared after hydrolysis reaction in the MMT-suspension solution and the peak of hydroxyl group was increased. Therefore the formation of chemical bonds between the hydroxyl group generated from APTES on the silicate surface and the ethoxy group of bis(triethoxysilylpropyl) tetrasulfide(TESPT) was possible. Consequently, the 300% modulus of SBR/APTES-MMT compounds was further improved in the case of using TESPT as a coupling agent. However, the silanization reaction between APTES and TESPT was not affected significantly according to the increase of mixing temperature in the internal mixer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 1993년도 제4회 학술발표회 논문개요집
• /
• pp.84-86
• /
• 1993

전자빔증착기를 이용하여 적외선영역에서 직접천이형 에너지갭을 갖는 III-V족 2원화합물반도체인 InSb박막을 제작하여 전기-자기적 및 광학적 특성을 조사하였다. 증착된 박막의 X-선회절법으로 분석한 결과, 열처리온도 5$25^{\circ}C$, 열처리시간 30분 열처리한 박막에서 In2O3피크가 없어지고, InSb피크만 나타났으며, 이때의 격자상수 a0=6.49$\AA$이었다. 기판온도가 증가할수록 InSb박막의 결정화가 일어나 전자이동도는 증가하고 비저항은 감소하였다. 온도 100~300K, 자계 500~9000 gauss범위에서 van der ppauw법에 의한 홀효과를 측정한 결과 증착된 박막의 전도형은 n형이었고, 상온에서 캐리어농도는 2.5$\times$10-16cm-3이었으며, 캐리어농도는 2.83$\times$104$\textrm{cm}^2$/V-sec이었다. 적외선 분광기로 측정한 InSb박막의 광학적 에너지갭은 기판온도가 증가할수록 InSb의 에너지갭에 해당하는 값으로 이동하였으며, 기판온도 30$0^{\circ}C$, 열처리온도 5$25^{\circ}C$일 때 측정한 값은 0.173eV였다.