• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.231-239
• /
• 1999

An improved version of current-regulated delta modulator (CRDM) is investigated for the output cunent control of v voltage-source inverters that have transformer-coupled series resonant load and are operated at the resonant frequency. Conventional CRDM has not only CUlTent offset problem but also transformer flux saturation problem when i it is applied to induction heating systems that have transformel-coupled loads. To cope with these problems, the effect of flux saturation is analysed, and simple method to av이d the problem is proposed. And integral type of CRDM is a adopted to remove the cunent offset. The boundaries of integrator gain for stable operation is calculated using the c concept of sliding mode controL The validity of proposed strategy is vel퍼ed through simulations and prototype e experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.625-628
• /
• 2011

This paper presents an LMI-based method to design an integral sliding mode controller for a class of uncertain systems with unmatched uncertainties. The uncertain system under consideration may have unmatched parameter uncertainties in the state matrix as well as in the input matrix. Using LMIs an existence condition of a sliding surface is derived. And a switching feedback control law is given. Finally, numerical examples are given to show that the proposed method can be better than the existing results for some cases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.385-392
• /
• 1993

This paper presents a new stable composite control law for the flexible joint robot manipulators, which incorporate an additional stabilizing control law with the sliding property. The singularly perturbated models in this paper include inertia moments which are functions or the deformations of actuators as well as link positions. The values of renewedly defined fast controller variables are computer from the corrected reduced-order model without additional computational loads. Proposed schemes are compared with the conventional one. The simulations for 2 DOF flexible joint manipulator show that the proposed schemes are more stable than the conventional scheme, and especially effective for the manipulator with high joint-flexibilities.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.369-378
• /
• 1999

This paper presents position control of an electro-hydraulic servo system whoch is operated by four 2-2way high speed on-off valves with either PWM PID control method or sliding mode control method, The advantages of using high speed on-off valves instead of electo-hydraulic servo valves or electro-hydraulic proportional valves are low price robustness for oil contamination and direct control without a D/A converter. The system consists of load cylinder inertia car potentiometer and external load cylinder. The experiments were carried out under several conditions and the results were compared. As a result the sliding mode method has shown good control performance and the robust and stable positioning of the elector-hydraulic servo system can be achieved accurately.

• The Journal of Korea Robotics Society
• /
• v.13 no.4
• /
• pp.256-264
• /
• 2018

Unlike normal wheels, the Mecanum wheel enables omni-directional movement regardless of the orientation of a mobile robot. In this paper, a robust trajectory tracking control method is developed based on the dynamic model of the Mecanum wheel mobile robot in order that the mobile robot can move along the given path in the environment with disturbance. The method is designed using the impedance control to make the mobile robot to track the path, and the integral sliding mode control for robustness to disturbance. The good performance of the proposed method is verified using the MATLAB /Simulink simulation and also through the experiment on an actual Mecanum wheel mobile robot. In both the simulation and the experimentation, we make the mobile robot move along a reference trajectory while maintaining the robot's orientation at a constant angle to see the characteristics of the Mecanum wheel.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.244-248
• /
• 2009

본 논문에서는 만타형상의 무인잠수정의 운동성능과 제어기설계에 대한 성능을 확인하기 위한 수학모델을 정립하여 시뮬레이션 프로그램을 개발하였다. 본 논문에 사용된 수학모델은 6자유도 운동방정식을 이용하여 Matlab / Simulink를 이용하여 시뮬레이션 프로그램을 개발하였다. 개발된 시뮬레이션 프로그램을 이용하여 만타형상무인잠수정(Manta-type unmanned underwater test vehicle)의 동역학적 운동성능을 해석하였으며, 무인잠수정의 제어성능을 해석하기 위하여 PID(비례-미분-적분)제어기와 슬라이딩모드(Sliding mode)제어기를 설계하여 만타형상무인잠수정의 제어 성능을 해석하였다. 설계된 제어기는 무인잠수정의 수심제어와 방향각제어에 사용되었다. 설계된 제어기의 성능을 확인하기 위하여 미국 해군대학원(Naval Postgraduate School)의 AUV II와 비교하였다. 설계된 수심제어와 방향각 제어기를 이용하여 만타형무인잠수정의 설계 목표에 부합하는 항해제어시뮬레이션을 실시하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.53-59
• /
• 1990

In the control of robot manipulators, this paper presents a design of a new variable structure model following controller(VSMFC) using computed torque method (CTM). A sufficient condition for the existence of a sliding mode is derived by Lyapunov function. The reference model is a double integrators and the acceleration input consists of a proportional-derivative controller for the purpose of the stabilization of system and the desired performance. The proposed control scheme which consists of upper bounded and estimated value of each term of the manipulator of matrix inversion. Therefore the simulation results show that this controller is improved to the convergence of desired trajectories.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1441-1443
• /
• 2010

This paper presents an LMI-based method to design an integral sliding mode controller for for a class of uncertain systems with mismatched unstructured uncertainties. The uncertain system under consideration may have mismatched parameter uncertainties in the state matrix as well as in the input matrix. Using LMIs we derive an existence condition of a sliding surface. And we give a switching feedback control law. Finally, we give a numerical design example in order to show that the proposed method can be better than the existing results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2480-2483
• /
• 2009

This paper presents an LMI-based method to design a integral sliding mode controller for a class of uncertain time-delay systems. Using LMIs we derive an existence condition of a sliding surface guaranteeing the asymptotic stability of the sliding mode dynamics. And we give a switching feedback control law. Our method is a generalization of the previous integral sliding mode control design methods. Since our method is based on LMIs, it gives design flexibility for combining various useful design criteria that can be captured in the LMI-based formulation. We also give LMI existence conditions of sliding surfaces guaranteeing a-stability or LQ performance constraint. Finally, we give a numerical design example to show the effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.233-236
• /
• 2002

We consider a single-input-single-output nonlinear system which can be represented in a normal form. The nonlinear system has a modeling uncertainties including the input coefficient uncertainties. A high-gain observer is used to estimate the states variables to reject a modeling uncertainty. A globally bounded output feedback integral sliding mode control is proposed to stabilize the closed loop system. The proposed integral sliding mode control can asymptotically stabilize the closed loop system in the it presence of input coefficient uncertainty.