• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.6
• /
• pp.353-358
• /
• 2016

In this paper, we have studied about the optimum fabrication condition of the printed Indium Tin Oxide (ITO) layers for the electrical resistance-type sensor application. We have investigated on the substrates surface treatments, mixing ratio of organic binder/ITO powder, and viscosity of the printing paste to determine the optimum condition of the screen printed ITO layer. Also, we found that the printing condition is closely related with the sensor performance. To know the feasibility of printed ITO layer as an electrical resistance-type sensor, we have fabricated the ITO sensors with a printed and sputtered ITO layers. The printed ITO films revealed $10^2$ times higher sensitivity than the sputtered ITO layer. Also, the sputtered ITO layer exhibited an operating temperature of $127^{\circ}C$ at the operating voltage of 5 V. While, in case of the printed ITO layer showed the operating temperature of $27.6^{\circ}C$ in high operating voltage of 30 V. We found that the printed ITO layer is suitable for the various sensor applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1459-1464
• /
• 2009

Recently demand for large-capacity aluminum heat sinks has been increased as market for high power electricity expands and high-performance electronic products develop. While the brazed heat sinks are in particular preferred, it is almost impossible to manufacture them with an atmospheric continuous furnace due to insufficient heating rate and various thickness of the parent metals. Therefore, a new index batch furnace is developed and the process variables are optimized. Then, brazing efficiency and tensile stress are obtained for brazed parts of the heat sinks. Finally experiment as well as numerical analysis has been performed to compare thermal efficiency of the brazed heat sinks with that of the silicone-bonded heat sinks.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.19-19
• /
• 2007

Excimer laser annealing (ELA) 방법을 이용하여 결정화하고 게이트 절연체로써 high-k 물질을 가지는 다결정 실리콘박막 트랜지스터의 전기적 특성을 평가하였다. 다결정 실리콘 박막 트랜지스터는 비결정질 실리콘 박막 트랜지스터 보다 높은 전계 효과 이동도와 운전 용이한 장점을 가진다. 기존의 결정화 방법으로는 다결정 실리콘 박막 트랜지스터의 높은 열 공급을 피할 수 없기 때문에, 매몰 산화막 위의 비결정질 박막은 저온에서 다결정 실리콘 결정화를 위해 KrF excimer laser (248nm)를 이용하여 가열 냉각 공정을 했다. 게다가 케이트 절연체로써 atomic layer deposition (ALD) 방법에 의해 저온에서 20 nm의 고 유전율을 가지는 $HfO_2$ 박막을 증착하였다. 알루미늄은 n-MOS 박막 트랜지스터의 게이트 전극으로 사용되었다. 금속 케이트 전극을 사용하여 게이트 공핍 효과와 관계되는 케이트 절연막 두께의 증가를 예방할 수 있고, 게이트 저항의 감소에 의해 소자 속도를 증가 시킬 수 있다. 추가적으로, 비결정질 실리콘 박막의 결정화 기술로써 사용된 ELA 방법은 SPC (solid phase crystallization) 방법과 SLS (sequential lateral solidification) 방법에 의해 비교되었다. 결과적으로, ELA 방법에 의해 결정화된 다결정 실리콘 박막의 결정도와 표면 거칠기는 SPC와 SLS 방법에 비해 개선되었다. 또한, 우리는 ELA 결정화 방법에 의한 다결정 실리콘 박막 트랜지스터로부터 우수한 소자 특성을 얻었다.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.10-17
• /
• 2020

The structural reliability assessment can be used to improve the reliability in the asset integrity management of the pipeline by using a geometric variation, mechanical characteristics, load change and operating condition as evaluation factors. When evaluating structural reliability, the failure probability of the natural gas pipe is evaluated by the relationship of the resistance of the pipe material to external loads. The failure probability of the natural gas pipe due to the combined stresses such as the internal pressure, thermal stress and bending stress was evaluated by using COMREL program. When evaluating the failure probability of the natural gas pipe, a buried depth of 1.5 to 30 m, a wheel load of 2.5 to 20 ton, a temperature difference of 45℃, an operating pressure of 6.86MPa, and a soil density of 1.8 kN/㎥ were used. The failure probabilities of the natural gas pipe were evaluated by the Von-Mises stress criterion as the maximum allowable stress criterion under the combined stresses.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.834-838
• /
• 2011

This research shows the electrical characteristic using excellent epoxy nano-composite of MgO 5.0 wt% and $SiO_2$ 0.4 wt% in mechanical strength test depending on nano-additive. First of all, volume resistance depending on nano-additive and temperature using high resistance meter (HP. 4329A) by increasing 10, 100, 1,000 V of applying voltage was measured. Moreover, temperature range of $25{\sim}120^{\circ}C$ with virgin sample was tested using TO-9B oven by Ando Company. The result showed that virgin and the samples added with MgO and $SiO_2$ had similar value of volume resistance in low temperature and low electric field region and reduced with slow slope. The nano-composite's volume resistance of sample added with MgO and $SiO_2$ had higher value than virgin sample's volume resistance in high temperature region more than $80^{\circ}C$. Moreover, the slope has steeply reduced. The volume resistance of sample added with MgO 5.0 wt% was $8.38{\times}10^{13}\;{\Omega}{\cdot}cm$ and it was 6.8 times more than virgin sample in high temperature at $120^{\circ}C$. The insulation characteristics were constant although filler has changed in low temperature region. But, in high temperature region, the value of volume resistance of sample with MgO 5.0 wt% was 7.6 times more than the virgin sample's volume resistance.

• Journal of radiological science and technology
• /
• v.27 no.2
• /
• pp.45-50
• /
• 2004

Synthesis diamond films have been deposited on the molybdenum substrates using an microwave plasma enhanced chemical vapor deposition method. The effects of deposition time, surface morphology, infrared transmittance and Raman scattering have been studied. Diamond deposited on molybdenum substrate for 100 hours by MW plasma CVD from $CH_4-H_2-O_2$ gas mixture had good crystallity with $100[{\mu}m]$ thickness needed for radiation detector. Diamond radiation detector of M-I-M type was made and the current of radiation detector was increased by increasing X-ray dose.

• The Korean Journal of Mycology
• /
• v.38 no.1
• /
• pp.48-53
• /
• 2010

Agrobacterium-mediated transformation was conducted in order to generate DNA insertional mutants of Flammulina velutipes. Agrobacterium tumefaciens AGL-1 harboring pBGgHg was transformed into gill tissues of Flammulina velutipes strain KACC42777. The transformants resistant on hygromycine ($30\;{\mu}g/ml$) were confirmed by PCR. The targeted insertional sites were amplified by inverse PCR and sequenced. To find the phenotype variation of all generated transformants, bottle cultivation which followed by the standard cultivation protocol were conducted. Color variation was observed on the cultivated fruiting bodies. Furthermore, the transformant pool will be used as a good genetic resources for studying gene function.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.184-184
• /
• 2010

Write-once-read-many times (WORM) 메모리 소자는 1회에 한해 쓰기 가능한 저장 장치로서 반영구적인 기록 보존을 필요로 하는 분야에서 널리 사용되는 저항 구조의 비휘발성 메모리 소자이다. 무기물을 사용한 WORM 메모리 소자의 제작과 소자의 전기적 특성에 관한 많은 연구가 활발히 진행되었으나 절연성 고분자인 Polystyrene (PS) 박막에 분산된 ZnO 나노입자를 이용한 무기물/유기물 복합 구조의 WORM 메모리 소자에 관한 연구는 상대적으로 미흡하다. 본 연구에서는 ZnO 나노입자가 분산되어 있는 PS를 스핀코팅 방법으로 박막 형태로 증착하여 WORM 메모리 소자를 제작하고 전기적인 성질을 조사하였다. 소자를 제작하기 위해 ZnO 나노 입자와 PS를 용매인 N,N-디메틸포메미드에 혼합하여 소자를 제작하였다. 그 후 하부 전극인 ITO가 증착되어 있는 유리 기판 위에 ZnO와 PS가 분산되어 있는 고분자 용액을 스핀 코팅 방법으로 도포한 후에 열을 가해 용매를 제거하여 박막을 형성하였다. ZnO 나노입자가 분산되어 있는 PS 박막 위에 Al을 상부 전극으로서 증착하였다. 전압을 인가하여 측정한 전류-전압 특성은 1.5 V에서 소자의 전도도가 크게 향상이 되는 것을 관측하였다. 읽기 전압에서 낮은 전도도(OFF 상태)와 높은 전도도 (ON 상태)의 크기는 $10^3$으로 이며, ON 상태가 된 이후에는 OFF 상태로 전환되지 않는 전형적인 WORM 메모리 소자의 특성이 관측되었다. ZnO 나노 입자가 없이 PS 만으로 박막을 제작한 소자는 쌍안정성 특성이 나타나지 않았다. 따라서 소자에서 전류 쌍안정성으로 나타난 원인은 PS안에 분산되어 있는 ZnO 나노입자에 기인함을 알 수 있었다. 제작된 WORM 메모리 소자의 기억 유지 특성에 대한 결과는 장시간에 걸친 측정에서 ON 전류 및 OFF 전류의 변화가 거의 없었다. 이 실험 결과는 제작된 무기물/유기물 복합 구조를 가진 WORM 메모리 소자는 우수한 기억 특성을 가지고 있으며 반영구적인 메모리 소자로 사용할 수 있음을 제시하고 있다.

• Korean Journal of Microbiology
• /
• v.23 no.4
• /
• pp.291-296
• /
• 1985

Leptospira isolated from patients and natural paddy water were further studied to confirm their serologic specificity with the bacteria in infected animal tissue and autopsied tissue of patients died with leptospirosis. And pathologic patterns of the inoculated antimal and the virulence of the bacteria in the animals were also studied. The findings are summarized as follows; $LD_{50}$ dose of the bacteria in guinea-pig were $1-2{\times}10^9$ cells and mice were found to be susceptible to them even though the degree of susceptibilities were much inferior to guinea pig. The bacteria were recovered from various organs; demonstrated massive hemorrages due to diapedesis and monocyte infiltration were observed, in some cases, intramedullary hemorrages of the infected kidnies and hematuria were recognized. All of the hyperimmune sera were strongly reacted with the tissues from autopsied human case who died of EPHF(Epidemic Pulmonary Hemorrhagic Fever) in immunofluorescent antibody tests.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1189-1196
• /
• 1988

Thermal entrance lengths of turbulent tube flow for viscoelastic polymer solutions are investigated experimentally in the recirculating flow system with tubes of inside diameters 8.5mm(L/D=710) and 10.3mm(L/D=1158), respectively. In the present system, the hydrodynamic and thermal boundary layers develop simultaneously from the beginning of the test section. To provide the boundary condition of constant heat flux at the wall, the test tubes are heated directly by electricity. The polymer solution used in the current study is 1000 wppm aqueous solution of polyacrylamide(Separan AP-273). The apparent viscosity of the polymer solutions circulating in the flow system are measured by the capillary tube viscometer at regular time intervals. Thermal entrance lengths vary due to the rate of degradation. The entrance lengths of degraded polymer solutions are about 500~600 times the diameter. However, the entrance lengths of fresh polymer solutions are greater than the lengths of the test tubes used in this study suggesting that thermal entrance lengths for viscoelastic polymer solutions are greater than 1100 tube times the diameters. Friction factor is almost insensitive to the degradation, but the heat transfer $j_{H}$-factor is affected seriously by degradation. Based on the present experimental data of fresh solutions a correlation for the heat transfer $j_{H}$-factor is presented.ted.