• Conservation Science in Museum
• /
• v.6
• /
• pp.55-66
• /
• 2005

Three types of epoxy resins (Epo-Tek 301, Araldite 103, and Araldite 106) and three types of pigments (bunche, pastel, and conté), which are materials for porcelain restoration, were selected as examination materials. The tone change, porosity, and sedimental resulting from the mixtures of varying ratios of these three materials were observed. Samples were also made from the mixture of Epo-teck 301, four kinds of white pigments, and six types of fillers and subjected to ultraviolet ray penetration for 200 hours to observe the oxidation of the epoxy resins. The result showed that the chemical composition of pastel drastically changed when mixed with Epo-tek 301. Although bunche and conté displayed clear colors, those of conté were less clear when it was mixed with other substances. Adding a small amount of Epo-tek 301 tended to be driven into the corner, whereas mixing a large amount caused saturation and boiling. On the other hand, AW 106 did not display clear colors owing to its high viscosity; when mixed in large amounts, however, the clarity of colors improved. For AY 103, a similar standard of color clarity was maintained regardless of the mixture ratio. The following was ranked according to the level of porosity: [Pastel>bunche≒conté]. In terms of sedimentary, however, [bunche>conté>Pastel], [Epo-tek 301> AY 103> AW 106]. The result of measuring the degree of yellowing revealed that titanium, pastel, silicon dioxide, and kaolin tended to turn yellow, whereas bunche, conté, diatomaceous earth, and calcium hydroxide tended to resist yellowing.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 1999.06a
• /
• pp.39-57
• /
• 1999

Chitin은 새우나 게 등을 비롯한 해산 갑각류의 가공 폐기물로 버려지는 부패, 악취발생 등의 환경공해를 일으키며 처리비용 등 여러 가지 문제를 야기하던 물질이지만 최근에는 부가가치가 높은 chitosan 및 chitooligosaccarides로 가공되기 때문에 폐기물의 자원화와 미이용 자원의 개발 등 여러 가지 측면에서 기대가 모아지고 있는 다당류이다. 더욱이 chitin의 탈아세틸화로 얻어지는 chitosan은 polycation의 성질을 가지고 있어서 현재 응집제로서 각종 공업 분야에 널리 이용되고 있으며 최근에는 그 외에도 다양한 생리적 기능성을 가지고 있다는 사실이 밝혀지면서 의료, 생호학, 화장품, 식품, 화학 공업 및 농업용 등 다양한 분야에 응용 가능한 신소재로서 기대가 높아지고 있다. 그런, chitosan은 생리적 기능은 우수하지만 물에 용해되지 않고 점도가 높으며 떫은맛이 나기 때문에 식품을 비롯한 기타 응용분야에 이용이 제한되고 있다. 따라서 많은 연구자들은 이와 같은 물리적인 장애를 개선함으로써 chitosan 자체가 갖는 우수한 생리적 기능을 이용할 뿐만 아니라 항종양성을 비롯한 새로운 생리적 기능을 갖는 chitosan 유도체의 개발을 시도하고 있다. Chitosan 유도체 중에서도 chitooligosaccharides는 chitosan의 가수분해로 얻어지는 저분자 화합물이므로 물에 잘 용해도며 점도가 낮고 용액이 단맛을 낼뿐만 아니라 chitosan이 갖지 않는 새로운 생리적 기능성을 갖는 것으로 알려지면서 관심이 집중되기 시작하였다. 본고에서는 chitosan과 chitooligosaccarides의 생리 활성 기능에 대한 지금까지의 연구결과를 소개하고자 한다.에 대한 면밀한 사안이 밝혀지는 경우가 많지 않다. 또한 그 발생 경위나 원인요소에 대해서는 일반에게 공개되지 않고 있어, 우리가 실천하여 식중독을 예방할 수 있는 정보가 함께 제시되지 못하는 형편이다. 따라서 본 고에서는 최근 수년간 외국에서 학교급식을 비롯한 집단급식 등에서 발생한 식중독 사례를 중심으로 고찰, 분석하였다. 이로부터 식중독 발생에 기여한 주요 원인을 찾아내고 여기서 얻어지는 교훈을 토대로 식중독 발생을 예방 및 최소화할 수 있는 실천적 대처 방안을 모색해 보고자 한다.중의 E. coli O157:H7이 연관되어있다는 보고도 있다. 목장 방문시 원유를 마신 어린이에서 HUS가 유발하였고, 균분리 결과, 농장의 소와 어린이에서 유사한 E. coli O157:H7이 분리된 바 있다. 본 연자들은 베로톡신 유형, plasmid profiles, RFLP 분석, phage type을 기초로하여 소에서 분리된 E. coli O157:H7이 사람유래주와 매우 유사함을 확인하였다.mm 및 2-6mm 난포에서의 101개(67.8%) 및 47개(50.0%) 보다 매우 낮게 나타났다. 전체 회수 난포란수도 4등급이 59.1%(149/252)로써 1, 2, 3등급의 0.4% (1/252), 7.6%(19/252) 및 32.9%(83/252)보다 높게 나타났다. 1회 평균 회수 난포란은 $\leq$2mm 난포에서 4.8$\pm$3.7개로써 2-6mm(3.0$\pm$3.4개) 및 $\geq$6mm (0.3$\pm$0.6개)보다 높았으며, 1회당 평균 8.1$\pm$5.1개의 난포란을 회수하였다. in

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.817-822
• /
• 1998

The authors found out that Aspergillus oryzae ATCC 22787 has the activity to produce a pretty strong chitosanase. Therefore, the strain was used for preparing the chitosan hydrolysate with high antimicrobial activity. The antimicrobial activity of the chitosan hydrolysate was increased gradually with decreasing of viscosity of the solution. The chitosan hydrolysate showing viscosity $5{\sim}10{\;}cp{\;}(30^{\circ}C)$ of 2% solution was revealed the most strong antimicrobial activity. The growth of the Bacillus sp. isolated from the fish meat paste was inhibited with the concentration of 50 ppm. The astringent taste of chitosan solution was reduced with decreasing of viscosity of the solution. The fish meat paste products containing 0.3% chitosan hydrolysate was extended its shelf life by 6 days stored at $15^{\circ}C$, 4 days at $20^{\circ}C$ and 2 days at $30^{\circ}C$.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.300-305
• /
• 2010

Zaltoprofen is a propionic acid derivative of non-steroidal anti-inflammatory drugs (NSAIDs) and has been widely used in the treatment of a number of arthritic conditions or lumbago. Zaltoprofen has low water solubility and low bioavailability, therefore great efforts have been devoted to enhance the extent of drug adsorption. In this study, zaltoprofen was formulated into a tablet to enhance the bioavailability and to achieve sustained-release using additives such as lactose monohydrate, carboxymethylcellulose (CMC), hydroxypropylmethylcellulose (HPMC). Fourier transform-infrared (FTIR) and differential scanning calorimeter (DSC) were employed to study the structure and crystallization of zaltoprofen in the tablet with various contents of additives. It was found that additives had interactions with zaltoprofen and inhibited the crystallization of zaltoprofen. Tablets containing low viscosity HPMC showed a higher release than those containing high viscosity HPMC. Also, as the amount of CMC increased zaltoprofen release increased.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.907-915
• /
• 2011

Moju is a low-alcoholic beverage made by filtering after boiling a mixture of makgeolli, ginseng, arrowroot, licorice root, cinnamon, jujube, ginger, and raw sugar. It is known to alleviate hangovers. To provide information for use in the development of palatable Moju, this study evaluated the physicochemical and sensory properties of 22 kinds of Moju being sold at different restaurants in Jeonju city. The mean values of obtained in the physicochemical analysis were as follows: water content, 91.28%; alcohol content, 1.09%; pH, 4.25; total acidity, 0.27%; reducing sugar content, 40.68 mg/mL; soluble solid content, 13.75 $^{\circ}Brix$; and viscosity 11.19 cP. The Lactic-, malic-, and citric- acid contents were higher than the contents of other organic acids. The sucrose content was higher than the contents of other free sugars. The mean value of the free amino acids was 175.3 mg%, lower than that of Takju, the main ingredient of Moju. It was considered that the free amino acids in Takju can be used as a substrate for the browning reaction in the process of Moju manufacture. In the sensory evaluation, the Moju with 0.15~0.25% total acidity, 10.6~13.4 $^{\circ}Brix$, and 5.73~9.57 cP was preferred.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.407-412
• /
• 2002

This study was carried out to investigate the differences in malt quality between high-protein Korean malting barley and low-protein Korean malting barley. The average protein content of each area in the 1996 crops was as follows; The protein content of Doosan-29 from Jeon-Nam was 14.1% (d.b), that of Sacheon-6 from kyung-Nam was 13.4% (d.b) and that of Doosan-8 from Je-Ju was 12.8% (d.b). In the micro malting trial for high and low protein malting barley, the original protein level of the malting barley was not changed and decreased during germination days. The malt friability of high-protein malting barley was very low, but that of low-protein malting barley was high. The malt friability of high-protein malting barley was 44.5% and that of low-protein malting barley was 84.2%. In proportion to an increase of +1% (d.b) in barley protein, the fine grind extract of malt was decreased -0.86% (d.b). Economically, it was the most negative factor for high-protein Korean malting barley. The ${\beta}-glucan$ content of high-protein malting barley was higher than that of low-protein malting barley. Wort viscosity and malt color were increased and Kolbach index was decreased in high-protein malting barley. Free amino nitrogen and diastatic power for high-protein malting barley were higher than those of low-protein malting barley. They were the most positive factors for high-protein Korean malting barley.

• Journal of Digital Convergence
• /
• v.13 no.8
• /
• pp.369-374
• /
• 2015

In this study, by combining a unique purpose and additional aspects of ultrasonic transmission media, a development potential on a new ultrasonic transmission media was sought. The rheological characteristics and the manufacturing cost for each manufactured formulation were compared and analysed with ready-made. An ultrasonic transmission media is to have different functional characteristics according to the following formulation, it was the best in rheological value, low viscosity emulsion with the oil gel. Polymer hydro gel is can be manufactured at low cost compared to other formulations. Emulsion which shows a sharp viscosity difference according to the components of oil and water had a big difference in manufacturing cost. This study can be utilized as the fundamental data on the ultrasound transmission media equipped with expertise in various areas of ultrasound.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.351-357
• /
• 2007

The Japanese Government selected Mutsu, Aomori Prefecture as a provisional spent-fuel repository site. This comes as a result of the prefecture's five-year campaign to host the site since 2000. Korea stores spent nuclear fuel within sites of nuclear power plants, and expects the storage capacity to reach its limit by the year 2016. This compels Korea to learn the cases of Japan. Having successfully hosted Gyeongju as a site for low-to-intermediate-level nuclear waste repository, Korea has already learned the potential process of hosting spent fuel storage site. The striking difference between the two countries in the process of hosting the site is that the Korean government had to offer the local city a large amount of subsidy for hosting through competitive citizens' referendum among candidate cities while it was the leadership of the local municipality that enabled the controversial decision in Japan. It is also a distinguishable characteristics of Japan that not a huge subsidy is provided to the local host city. I hope this study offers an idea to Korea's future effort to select a spent-fuel host site.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.3
• /
• pp.1-12
• /
• 2018

This study attempts to identify the relationship between inequality and entrepreneurship activities and to provide theoretical and policy implications. To do this, we use the Global Entrepreneurship Monitor (GEM), which is a survey of entrepreneurial activities at the national level, the World Income Inequality Database (WIID), and the World Bank survey data. The analysis shows entrepreneurial activities are relatively high in countries with high level of inequality. We also find GDP moderates the relationship between inequality and entrepreneurial activity. In addition, as expected, necessity entrepreneurship prevails in low income group while opportunity entrepreneurship is dominant in high income group. The study illustrates potential venue for research of entrepreneurship and inequality, whiles calls for broader studies and scrutiny.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.364-371
• /
• 2012

Polystyrene/single-walled carbon nanotube (PS/SWCNT) nanocomposites were prepared by latex technology and the effect of surfactant (SDS) on nanotube dispersion, rheological and electrical properties was investigated. The nanocomposites were prepared through freeze-drying after mixing PS particles and aqueous SWCNT/SDS suspension. As the SDS content increased, the storage modulus and complex viscosity of the nanocomposites were increased due to enhanced dispersion of nanotubes, but if the content excessively increased, the modulus and viscosity began to decrease due to low molecular weight of SDS. The electrical conductivity sharply increased with the addition of SDS, and then did not show significant changes. This result is speculated to be the competition between the increased dispersion of nanotubes and the deterioration of electrical conductivity by SDS adsorption. An optimal ratio of SDS to SWCNT for improving electrical conductivity and end-use properties was 2. With this ratio, the electrical percolation threshold of SWCNT was less than 1 wt%.