• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.409-411
• /
• 2005

이동 단말기 또는 센서 등이 사용하는 무선 통신에서는 통신에 소모되는 전력을 줄이는 문제가 중요시된다. 따라서 802.11 무선 LAN의 PSM과 같이, 대부분의 무선 통신 기술들은 일시적으로 NIC를 꺼서 전력소모를 줄이는 Sleep 모드 기능을 제공하고 있다. 그러나 Sleep 기간 동안 해당 단말로 보내져야할 트래픽이 다양한 형태로 발생할 수 있다는 점을 깊이 고려하지 않고 Sleep 모드의 동작을 정의하였으며, 그 결과 예상하지 못한 현상이 발생할 가능성이 상존한다. 본 연구에서는 이와 같은 현상의 예로서, 802.11의 PSM 노드에 발생할 수 있는 성능 반전과 에너지 소모를 통한 서비스 거부 공격을 제시한다. 또한 이와 같은 비정상적인 현상을 방지하는 방법으로서 기존의 Sleep을 폐쇄적(Closed) Sleep과 개방적(Open) Sleep으로 세분할 것을 제안한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.481-483
• /
• 2003

이동 장비들은 베터리를 전원으로 하고 있으며 이들이 사용하는 무선 통신에 소모되는 전력을 줄이는 것은 베터리의 적은 전력량을 고려해 볼 때 매우 중요하다. 본 논문은 802.11b infrastructure환경에서 저전력 통신 기법을 개발하기 위해 전송 전력이 통신 성능에 미치는 영향을 실험하였다. 실험 결과 사무실 수준의 공간에서는 성능에 영향을 미치지 않으면서 전력을 낮출 수 있고, 이 경우 전송으로 인한 전력 소비에서 18%정도의 전력 절감이 가능하리라는 것을 확인 할 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1038-1041
• /
• 2009

Wireless sensor network with wireless sensor nodes which equipped with temperature, humidity, illumination, or soil sensor etc, get a natural environment information and analyze and utilized variety way.these network consist of a short distance wireless communication and multi-hop techniques with multiple nodes equipped low-power wireless transceivers. so the characteristic of the data collected through the wireless sensor network is obtained from compact nodes within a limited range. However, to get a data from the wireless sensor nodes scattered in a wide range, this network needs a wireless transceiver that consumes many power or a lot of intermediate nodes. then, merit of low cost and low electrical energy decrease. To solve this problem, this paper offers environment monitoring system using autonomous mobile robot that collect data from groups of each sensor networks scattered widely.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.940-948
• /
• 2008

This paper presents a low-power, low-complexity design and implementation results of a high speed multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) wireless LAN (WLAN) baseband processor. The proposed processor is composed of the physical layer convergence procedure (PLCP) processor and physical medium dependent (PMD) processor, which have been optimized to have low-power and reduced-complexity architecture. It was designed in a hardware description language (HDL) and synthesized to gate-level circuits using 0.18um CMOS standard cell library. As a result, the proposed TX-PLCP processor reduced the power consumption by as much as 81% over the bit-level operation architecture. Also, the proposed MIMO symbol detector reduced the hardware complexity by 18% over the conventional SQRD-based architecture with division circuits and square root operations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.181-183
• /
• 2022

항해통신장비는 수년간 유선형 핸드마이크를 사용하여 왔다. 시대 변화에 맞추어 근거리 통신기술을 접목한 무선형 핸드마이크개발로 사용자의 편의성을 증대하였다. 저전력근거리 통신기술 접목으로 무선화 가능성 확인 및 유선형 핸드마이크 겸용으로 가청능력 향상 및 통신감도에 대한 차이점 식별을 최소화 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.358-359
• /
• 2012

본 연구에서는 범용적인 건강 모니터링에 활용할 수 있는 생체신호인 심전도를 일반 가정 내에서 뿐만 아니라 일상생활 중에서도 실시간으로 편리하게 측정할 수 있도록 초소형 저전력의 착용형 심전도 계측시스템을 구현하였다. 이를 위하여 표준 12-lead법이 아닌 모바일 또는 휴대용 장치에 적합한 2-lead법을 사용하여 심전도 계측부를 구현하였고, 심전도 계측부를 베이스 노드로 하여 심전도 신호를 가정 내 또는 실외에서도 무선으로 전송 할 수 있도록 구현하였다. 먼저 가정 내에서는 저 전력 무선센서노드를 이용하여 심전도 신호를 실시간으로 PC에 전송하여 모니터링이 가능하도록 구현 하였고, 실외에서는 저전력 통신 방식인 Bluetooth 2.0을 사용하여 스마트폰으로 심전도 신호를 실시간으로 전송해 모니터링 할 수 있도록 구현하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.749-756
• /
• 2015

In this paper, we propose a unique systolic structure and communication algorithm that maintains a solid link between nodes using synchronous digital communication and enables low power communication. This system was designed by using CC2500 RF transceiver, CC2590 RF front end and C8051F330 low power microcontroller. The measurement of power consumption in the network link shows below $400{\mu}W$ in data transfer rate 320bps. The system constitutes the base unit of low power wireless network that was composed of each seven link nodes having eight sensor nodes. Results of the experiments show that link nodes using a 4Ah battery could operate over 3 years without replacement.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.179-188
• /
• 2003

Advances in wireless networking technology has engendered a new paradigm of computing, called mobile computing, in which users carrying portable devices have access to a shared infrastructure independent of their physical locations. Wireless communication has some restraints such as disconnection, low bandwidth, a variation of available bandwidth, network heterogeneity, security risk, small storage, and low power. Power adaptation routing scheme overcome the shortage of power by adjusting the output power, was proposed. Existing power saving routing algorithm has some minor effect such as seceding from shortest path to minimize the power consumption, and number of nodes that Participate in routing than optimal because it select a next node with considering only consuming power. This paper supplements the weak point in the existing power saving routing algorithm as considering the gradual approach to final destination and the number of optimal nodes that participate in routing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.365-372
• /
• 2007

In IEEE 802.11b wireless network, stations synchronize themselves to the beacons periodically sent by the access point(AP) when they are running in low power mode. In case of missing beacon due to noise or traffic from neighboring wireless network stations must be awake until they get the next beacon, which causes energy consumption in stations. In this paper, we propose a scheme searching next beacon consuming little energy. The problems of missing beacon in low power mode of IEEE 802.11b wireless interface are described and a new method to reduce energy consumption is proposed. The proposed method is simulated with the network simulator, ns2, and compared with the low power mode of the IEEE 802.11b. The result measured in terms of station's wakeup time shows some enhancement in energy consumption when some errors occur in receiving frames.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.91-96
• /
• 2015

Heterogeneous cellular networks support various wireless environments for mobile service. Recently, data services as well as voice services are exponentially increased in cellular networks and the technical transition of LTE-A and IEEE 802.16m so that more base stations are requested to provide suitable service. Base stations consume most of energy in cellular networks, and the energy saving is needed for the base station. In this paper, we propose a saving power scheme by the dynamic energy management. In this paper we consider the simulation evaluations of handover for the low powered base station.