• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.46.1-46
• /
• 2003

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.6
• /
• pp.743-748
• /
• 2022

The initial operation stability of hydrogen-fueled, solid oxide fuel cell with Ni thin-film anode fabricated by direct current sputtering was evaluated in terms of electrochemical properties such as peak power density, open circuit voltage, overpotential, and alternating current impedance at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively.

• Journal of the Korean Ceramic Society
• /
• v.43 no.12 s.295
• /
• pp.751-757
• /
• 2006

Recently, a new type of solid oxide fuel cells has been developed employing extremely thin oxide electrolyte. These fuel cells are expected to operate at significantly reduced temperature compared to conventional solid oxide fuel cells. Accordingly, they may resolve the stability and material selection issues of high temperature fuel cells. Furthermore, they may eliminate the limitations of polymer membrane fuel cells whose operation temperature is under $100^{\circ}C$. In this paper, we review the electrolytes for intermediate temperature operation. Then, we discuss the current development of thin film solid oxide fuel cells that possibly operated at low temperatures.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.900-906
• /
• 2004

Solid oxide fuel cells have a limitation in their low-temperature application due to the low ionic conductivity of electrolyte materials and difficulties in thin film formation on porous gas diffusion layer. These problems can be solved by improvement of ionic conductivity through controlled nanostructure of electrolyte and adopting nanoporous electrodes as substrates which have homogeneous submicron pore size and highly flattened surface. In this study, ultra-thin oxide films having submicron thickness without gas leakage are deposited on nanoporous substrates. By oxidation of metal thin films deposited onto nanoporous anodic alumina substrates with pore size of $20nm{\sim}200nm$ using dc-magnetron sputtering at room temperature, ultra-thin and dense ionic conducting oxide films with submicron thickness are realized. The specific material properties of the thin films including gas permeation, grain/gran boundaries formation, change of crystalline structure/microstructure by phase transition are investigated for optimization of ultra thin film deposition process.

• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.865-871
• /
• 2005

Submicron thick solid electrolyte membrane is essential to the implementation of low temperature solid oxide fuel cell, and, therefore, development of new electrode structures is necessary for the submicron thick solid electrolyte deposition while providing functions as current collector and fuel transport channel. In this research, a nickel membrane with multi-stage nano hole array has been produced via modified two step replication process. The obtained membrane has practical size of 12mm diameter and $50{\mu}m$ thickness. The multi-stage nature provides 20nm pores on one side and 200nm on the other side. The 20nm side provides catalyst layer and $30\~40\%$ planar porosity was measured. The successful deposition of submicron thick yttria stabilized zirconia membrane on the substrate shows the possibility of achieving a low temperature solid oxide fuel cell.

• Journal of the Korean Ceramic Society
• /
• v.44 no.4 s.299
• /
• pp.214-218
• /
• 2007

The decrease of polarization resistance in cathode is the key point for operating at intermediate temperature SOFC (solid oxide fuel cell). In this study, the influence of Co substitution in B-site at complex perovskite on the electronic conductivity of PSCM ($Pr_{0.3}Sr_{0.7}Co_xMn_{(1-x)}$) was investigated. The PSCM series exhibits excellent MIEC (mixed ionic electronic conductor) properties. The ASR (area specific resistance) of PSCM3773 was $0.174{\Omega}{\cdot}cm^2\;at\;700^{\circ}C$. The activation energy of PSCM3773 was also lower than other compositions of PSCM. The TEC(thermal expansion coefficient) was decreased by addition of Mn. The ASR values were increased gradually during the thermal cycling test of PSCM37773 due to the delamination between electrolyte and cathode materials. The delamination was caused by the difference of TEC.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.346-351
• /
• 2002

The electrical conductivity and phase stability of $ZrO_2$ doped with $Sc_2O_3$ and $CeO_2$ were investigated in order to search for better solid electrolyte material for solid oxide fuel cell. Present study showed that $ZrO_2$ doped with $Sc_2O_3$ and $CeO_2$ exhibited no phase transition during the heat treatment up to $1350^{Circ}C∼1550^{Circ}C$ and was stable as a cubic phase in whole temperature ranges. The $ZrO_2$ doped with $Sc_2O_3$ and $CeO_2$ showed much higher electrical conductivity than YSZ in the temperature range of $300∼^{Circ}C$ and better long term stability than other sc-$ZrO_2$ based electrolyte that showed the possibility as a strong candidate electrolyte material for intermediate-or low-temperature SOFC.

• Journal of the Korean Ceramic Society
• /
• v.44 no.12
• /
• pp.727-732
• /
• 2007

In order to fabricate a highly performing cathode for low-temperature type solid oxide fuel cells working at below $700^{\circ}C$, electrode microstructure control and electrode polarization measurement were performed with an electronic conductor, $La_{0.8}Sr_{0.2}MnO_3$ (LSM) and a mixed conductor, $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$(LSCF). For both cathode materials, when $Sm_{0.2}Ce_{0.8}O_2$ (SDC) buffer layer was formed between the cathode and yttria-stabilized zirconia (YSZ) electrolyte, interfacial reaction products were effectively prevented at the high temperature of cathode sintering and the electrode polarization was also reduced. Moreover, cathode polarization was greatly reduced by applying the SDC sol-gel coating on the cathode pore surface, which can increase triple phase boundary from the electrolyte interface to the electrode surface. For the LSCF cathode with the SDC buffer layer and modified by the SDC sol-gel coating on the cathode pore surface, the cathode resistance was as low as 0.11 ${\Omega}{\cdot}cm^2$ measured at $700^{\circ}C$ in air atmosphere.

• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.821-826
• /
• 2005

Gadolinia-doped ceria nanopowder was prepared by glycine-nitrate combustion method with different glycine/nitrate mixing ratio. The characteristics of the synthesized powder were investigated by X-ray diffraction method, transmission electron microscopy, thermal gravity, differential thermal analysis and thermo-mechanical analysis. The smallest powder was obtained with glycine/nitrate ratio 1.00 and the lowest organic and water vapor contained powder was made with glycine/nitrate ratio 1.75. According to dilatometry, fast densification was occurred around $1000^{\circ}C$ and shows full density over $1300^{\circ}C$. Finally near-fully dense ceria electrolyte was fabricated with conventional sintering technique. Glycine-nitrate process yields fine nanopowders which enable low temperature sintering and fabrication of fully dense and nanostructured oxide electrolyte.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.295-299
• /
• 2014

Electrical conductivities of complex perovskites, layered perovskite and Sr doped layered perovskite oxides were measured and analyzed for cathode materials of Intermediate Temperature-operating Solid Oxide Fuel Cells (IT-SOFCs). The electrical conductivities of $Sm_{1-x}Sr_xCoO_{3-\delta}$ (x = 0.3 and 0.7) exhibit a metal-insulator transition (MIT) behavior as a function of temperature. However, $Sm_{0.5}Sr_{0.5}CoO_{3-\delta}$ (SSC55) shows metallic conductivity characteristics and the maximum electrical conductivity value compared to the values of $Pr_{0.5}Sr_{0.5}CoO_{3-\delta}$ (PSC55) and $Nd_{0.5}Sr_{0.5}CoO_{3-\delta}$ (NSC55). The electrical conductivity of $SmBaCo_2O_{5+\delta}$ (SBCO) exhibits a MIT at about $250^{\circ}C$. The maximum conductivity is 570 S/cm at $200^{\circ}C$ and its value is higher than 170 S/cm over the whole temperature range tested. $SmBa_{0.5}Sr_{0.5}Co_2O_{5+\delta}$ (SBSCO), 0.5 mol% Sr and Ba substituted at the layered perovskite shows a typically metallic conductivity that is very similar to the behavior of the SSC55 cathode, and the maximum and minimum electrical conductivity in the SBSCO are 1280 S/cm at $50^{\circ}C$ and 280 S/cm at $900^{\circ}C$.