• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.242-252
• /
• 2016

A process-based ecosystem model, BIOME-BGC, was applied to simulate seasonal and inter-annual dynamics of carbon and water processes for potential evergreen needleleaf forest (ENF) biome in Korea. Two simulation sites, Milyang and Unljin, were selected to reflect warm-and-dry and cool-and-wet climate regimes, where massive diebacks of pines including Pinus densiflora, P. koraiensis and P thunbergii, were observed in 2009 and 2014, respectively. Standard Precipitation Index (SPI) showed periodic drought occurrence at every 5 years or so for both sites. Since mid-2000s, droughts occurred with hotter climate condition. Among many model variables, Cpool (i.e., a temporary carbon pool reserving photosynthetic compounds before allocations for new tissue production) was identified as a useful proxy variable of tree carbon starvation caused by reduction of gross primary production (GPP) and/or increase of maintenance respiration (Rm). Temporal Cpool variation agreed well with timings of pine tree diebacks for both sites. Though water stress was important, winter- and spring-time warmer temperature also played critical roles in reduction of Cpool, especially for the cool-and-wet Uljin. Shallow soil depth intensified the drought effect, which was, however, marginal for soil depth shallower than 0.5 m. Our modeling analysis implicates seasonal drought and warmer climate can intensify vulnerability of ENF dieback in Korea, especially for shallower soils, in which multi-year continued stress is of concern more than short-term episodic stress.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.106-113
• /
• 2009

Germination percentage of Korean native lily seeds was high at $20-25^{\circ}C$. It was almost 100% in L. cernuum, L. callosum, L. amabile, and L. concolor, 88.0% in L. lancifolium, and 73.0% in L. maximowitzii, respectively. Meanwhile, it was low rate of 34.0%-54.0% in L. distichum, L. hansonii, and L. tsingtauense. Germination was mostly delayed of $15^{\circ}C$ and days to germination were more shortened in species with higher germination percentage. Even though the effect of daylength was not considerable in germination rate, it was promoted in L. maximowitzii but it was delyed in L. hansonii under long day. The effect of soaking in hot PGRs solution in L. callosum, L. cernuum, L. amabile, L. lancifolium, and L. concolor did not show any difference in comparison with non-treatment. However, it was improved by BA in L. maximowitzii. Longer period of cold wet storage resulted in improved germination percentage in L. maximowitzii and L. lancifolium, while it affected decreased percentage in L. distichum and L. hansonii. Days to germination were shortened by longer period of cold wet storage regardless of species. Germination percentage in dry storage was higher under cold temperature than room temperature and under desiccator storage than outside desiccator, it was highest under desiccator storage at $4^{\circ}C$. It was drastically reduced by the non-use desiccator storage at room temperature L. concolor, however it was improved only by the use of desiccator L. maximowitzii for a long time.

• Journal of Plant Biotechnology
• /
• v.49 no.4
• /
• pp.307-315
• /
• 2022

Artemisinin is a secondary metabolite of Artemisia annua that shows potent anti-malarial, anti-bacterial, antiviral, and anti-tumor effects. The supply of artemisinin depends on its content in Artemisia annua, in which various environmental factors can affect the plant's biosynthetic yield. In this study, the effects of different light-emitting diode (LED)-irradiation conditions were tested to optimize the germination and growth of Artemisia annua for the enhanced production of artemisinin. Specifically, the ratio between the red and blue lights in the irradiating LED was varied for investigation as follows: [Red : Blue] = [6 : 4], [7 : 3], and [8 : 2]. Furthermore, additional stress factors like UV-B-irradiation (1,395 ㎼/cm²), low temperature (4℃), and dehydration were also explored to induce hormetic expressions of ADS, CYP, and ALDH1, which are essential genes for the biosynthesis of artemisinin. Quantitative polymerase chain reaction (qPCR) was used to analyze the expression levels of the respective genes and their correlation with the specified conditions. [8 : 2] LED-irradiation was the most optimal among the tested conditions for the cultivation of Artemisia annua in terms of both fresh and dry weights post-harvest. For the production of artemisinin, however, [7 : 3] LED-irradiation with dehydration for six hours pre-harvest was the most optimal condition by inducing around twofold enhancement in the biosynthetic yield of artemisinin. As expected, a correlation was observed between the expression levels of the genes and the contents of artemisinin accumulated.

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.217-222
• /
• 1999

The pick up impurity was studied for preparing the NiCuZn ferrite powder by a ball milling method that usually uses in the industrial ceramic process. The raw materials of NiO, CuO, ZnO, and $Fe_2O_3$ powder were weighted according to various spinel composition and mixed for 18 hrs by a wet ball milling method after that the slurry was followed by spray dried and calcined at $700^{\circ}C$ 3 hrs. The calcined NCZF powder was finally ball milled during 65 hrs as same method. The stainless steel ball and jar are used as mixing and milling equipment and the solid concentration of the slurry was 25 vol%. The impurities, stainless steel pickup, were effected by the composition of raw materials especially iron oxide, nickel oxide in the mixing process and by the rate of calcine of NiCuZn ferrite in final milling process. The empirical equation of stainless steel pickup was driven in the wet ball milling system. Finally, the composition of NiCuZn ferrite could be controlled by the empirical equation.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.377-380
• /
• 2015

In this paper, we have investigated the optimization of $I_2$ recovery process from $NH_4I$ solution, which is generated as by-product during the amination reaction of p-diiodobenzene (PDIB) for p-phenylenediamine (PPD) synthesis. The recovered $I_2$ is then recycled as a raw material for PDIB synthesis. We have employed a cation exchange resin to recover $I_2$ from $NH_4I$ sample solution, and determined the breakthrough point and exchange capacity from the breakthrough curve. Furthermore, we have suggested optimum conditions of our $I_2$ recovery process by measuring the purity and yield of recovered $I_2$ with respect to the concentrations of $NH_4I$ and oxidant ($H_2O_2$) solutions, the oxidation time, and the temperature of drying process. Finally, the yield and purity as high as 94.96% and 96.65%, respectively were obtained by reusing the residual solution still containing unrecovered iodide ions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.339-339
• /
• 2012

지난 몇 년 동안, 투명 비정질 산화물 반도체는 유기 발광 다이오드, 플렉서블 전자 소자, 솔라 셀, 바이오 센서 등 많은 응용분야에 연구되고 있다. 투명 비정질 산화물 반도체 그룹들 중, 특히 비정질 IGZO 박막 트랜지스터는 비정질 상태임에도 불구하고 높은 이동도와 낮은 동작 전압으로 훌륭한 소자 특성을 보인다. 이러한 고성능의 IGZO 박막 트랜지스터는 RF 마그네트론 스퍼터링이나 pulsed laser deposition과 같은 고진공 장비를 이용하여 이미 여러 그룹에서 제작되고 발표되었다. 하지만 진공 증착 시스템은 제조 비용의 절감이나 디스플레이 패널의 대면적화에 큰 걸림돌이 되고 있고, 이러한 문제점을 극복하기 위해서 용액 공정은 하나의 해결책이 될 수 있다. 용액 공정의 가장 큰 장점으로는 저온 공정이 가능하기 때문에 글라스나 플라스틱 기판에서 대면적으로 제작할 수 있고 진공 장비가 필요없기 때문에 제조 비용을 획기적으로 절감시킬 수 있다. 본 연구에서는 high-k 게이트 절연막과 IGZO 채널 층을 용액 공정을 이용하여 박막 트랜지스터를 제작하고 그에 따른 전기적 특성을 분석하였다. IGZO의 몰 비율은 In, Ga, Zn 순으로 각각 0.2 mol, 0.1 mol, 0.1 mol로 제작하였고, high-k 게이트 절연막으로는 Al2O3, HfO2, ZrO2을 제작하였다. 또한, 용액 공정 IGZO TFT를 제작하기 전, 용액 공정 high-k 게이트 절연막 캐패시터를 제작하여 그 특성을 분석하였다. 다양한 용액 공정 high-k 게이트 절연막 중, 용액공정 HfO2를 이용한 IGZO TFT는 228.3 [mV/dec]의 subthreshold swing, 18.5 [$cm^2/V{\cdot}s$]의 유효 전계 이동도, $4.73{\times}106$의 온/오프 비율을 보여 매우 뛰어난 전기적 특성을 확인하였다.

• Tunnel and Underground Space
• /
• v.25 no.5
• /
• pp.435-449
• /
• 2015

Physical and microstructural properties of Pungchon and Maggol limestone were investigated quantitatively during 50 cycles of artificial freezing and thawing test. There were decrease in dry weight and P,S-wave velocity, and increase in absorption rate in both rock types. Porosity, pore volume, equivalent diameter, throat thickness and pore orientation were analyzed using X-ray computed tomography images. Porosity increased, and initiation and expansion of pores were investigated as weathering progresses. Physical and microstructural variation in Maggol limestone was larger than that of Pungchon limestone because Maggol limestone has more pores and microcracks at initial state. As this study analyzes physical and microstructural properties of rock specimens comprehensively, it can be applied to further rock weathering study and can be used as fundamental data of construction and resource development in cold regions.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.4
• /
• pp.149-154
• /
• 2005

Fuel cell performance evaluation logic was developed using G-language (LabVIEW) to measure performance stability. Degree of stability and reliability of performance data were improved with averaged value and standard deviation method. Water injection system was introduced and the performance using this method was comparable to that of conventional humidification method. Water injection system has advantage of lowering operation energy consumption, reducing the number of parts needed in humidification, therefore increasing efficiency of fuel cell system. Fuel cell performance was decreased in case of low temperature operation such as sub freezing condition. Air purge method was tested to reduce the water content in cell fixture before sub freezing condition. The performance degradation due to low temperature operation was minimized by air purge method in medium size cell fixture ($25cm^2$) case.

• Journal of Biosystems Engineering
• /
• v.34 no.5
• /
• pp.351-357
• /
• 2009

This study was conducted to verify the simulation model through the drying test, and investigate effect of factors, such as temperature of drying air, airflow rate, and velocity of the airflow, on the drying. The low temperature drying simulation model was developed based on the circulation dry simulation model presented by Keum et al. (1987), and by modifying low temperature thin layer drying model, equilibrium moisture content model, latent heat of vaporization model, and crack ratio prediction model. The heat pump and experimental dryer with a capacity of 150kg were used for the test. The RMSE between the predicted and measured value was 0.27% (drying temperature), 0.15% (crack ratio), and 2.08% (relative humidity), so the relevance of the model was verified. In addition, the effect of drying temperature, airflow rate, and velocity of the airflow on the drying was examined. The experimental results showed that the crack ratio at drying temperature of $25{\sim}40^{\circ}C$ was allowable. Moreover, at below $30^{\circ}C$, variation of the crack ratio was slight, but drying time was delayed. Given these results, the drying temperature of over $30^{\circ}C$ was effective. As the airflow rate increased, required energy dramatically increased. Whereas drying rate slowly increased, so loss of drying efficiency was caused. Considering these results, the dryer needed to be designed and adjusted to lower than $30\;m^3/min{\cdot}ton$. As velocity of the airflow increased, required drying energy increased when the velocity of the airflow was over $5\;m^3$/hr, while crack ratio and drying rate showed little variation.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.415-420
• /
• 1990

To prevent red pepper from post harvest decay and to reduce the labor and drying expenses, the red pepper paste was directly prepared from fresh red pepper. The characteristics of red pepper paste and processing properties were investigated, and the effect of salt and heat on product quality during processing and storage were studied. After the processed red pepper paste was stored at room temperature, $5^{\circ}C\;and\;-3^{\circ}C$ without light for 6 months, kimchi was prepared with the stored red pepper paste to evaluate any quality change. The weight and pH of pericarp were 73.2% of total and 5.0, respectively. Addition of 10% salt to the paste decreased the pH of paste, reducing the sterilization time down to 10 min against growth of Clostridium botulinum. Thermal diffusivity of paste after pasteurization was $1.190{\times}10cm^{-7}/sec$, which was lower than control, probably due to air in pouch. The red pepper paste with 10% salt added, followed by sterilization for 10 min, could be preserved for over 6 months at $5^{\circ}C$.