• Title/Summary/Keyword: 저온형

Search Result 829, Processing Time 0.029 seconds

6.6 kV 저항형 초전도 한류기 개발

  • 현옥배
    • Superconductivity and Cryogenics
    • /
    • v.6 no.2
    • /
    • pp.21-25
    • /
    • 2004
  • 초전도 한류기는 전기 회로에 사고 발생시 대단히 빠르게 임피던스를 발생시켜 고장전류를 제한한다. 여러 종류의 고온초전도체가 한류기용 도체로 활용되고 있는데, 도체의 종류에 따라 다양한 종류의 초전도 한류기가 제안 및 개발되고 있다. 그 중 저항 스위치형 한류기는 다른 형식에 비해 작고, 간단하고, 필경 값이 싸다. 저항 스위치형 한류기는 통전 전류가 임계전류(Ic) 초과시 초전도체가 상전도체로 전이(quench)할 때 대단히 빨리 저항이 발생함을 이용하는 수동소자이다.(중략)

  • PDF

Development of Reduced Temperature Solid Oxide Fuel Cells and Test of a Short Stack (저온형 고체산화물 연료전지의 개발과 이를 이용한 소형 스택의 성능 시험)

  • 유영성;박진우;임희천;이규창;조남웅
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 2003.05a
    • /
    • pp.649-653
    • /
    • 2003
  • 일반적으로 연료전지에는 알카리형(AFC)과 인산형(PAFC), 고분자형 연료전지(PEMFC) 등과 같이 비교적 저온에서 동작되는 연료전지와 고온형으로 $650^{\circ}C$에서 정온 동작되는 용융탄산염형 연료전지(MCFC)와 운전온도가 약 500~100$0^{\circ}C$로 폭넓게 적용될 수 있는 고체산화물 연료전지(혹은 고체전해질 연료전지, Solid Oxide Fuel Cell, SOFC)가 있다.(중략)

  • PDF

Cure Behavior and Chemorheology of Low Temperature Cure Epoxy Matrix Resin (저온 경화형 에폭시 매트릭스 수지의 경화거동 및 화학유변학에 대한 연구)

  • Na, Hyo Yeol;Yeom, Hyo Yeol;Yoon, Byung Chul;Lee, Seong Jae
    • Polymer(Korea)
    • /
    • v.38 no.2
    • /
    • pp.171-179
    • /
    • 2014
  • Low temperature cure prepregs are being developed for use in the preparation of large-structured fiber-reinforced polymer (FRP) composites with good performance. Cure behavior and chemorheology of low temperature cure epoxy resin system, based on epoxy resin, curing agent, and accelerators, were investigated to provide a matrix resin suitable for the prepreg preparation. Characteristics of cure reaction were studied in both dynamic and isothermal conditions by means of differential scanning calorimetry and rheometry. The low temperature cure epoxy resin system suggested in this study as a matrix resin was curable at $80^{\circ}C$ for 3 h, and showed the gel times of 120 and 20 min at 80 and $90^{\circ}C$, respectively. Thermal and mechanical properties of the cured sample were almost the same as high temperature cure counterparts.

Study on Thermal Environmental Test for XKT-1 (KT-1 Export Version) Aircraft (XKT-1(수출형 KT-1) 항공기 열 환경시험에 관한 연구)

  • Kim, Jinseog
    • Journal of Aerospace System Engineering
    • /
    • v.15 no.3
    • /
    • pp.105-113
    • /
    • 2021
  • This paper delineates the applied thermal environmental test profiles using test conditions and procedures based on MIL-STD-810 Method 501 (High Temperature Test Method) and Method 502 (Low Temperature Test Method). The test profiles have been optimized in order to comply with export customer's requirements and product reliability in high and low temperature environment for XKT-1 (KT-1 Export Version) aircraft. Additionally, the tests are suitable for large sized environmental chambers, which is one of the facilities of ADD (Agency for Defense Development) according to ETEMP (Environmental Test and Evaluation Master Plan). The results of these test profiles and test executions satisfy the customer requirements and product reliability. The present paper can be applied to the other export programs with more severe temperature conditions.

Cracking in Welds and Its Prevention(V) - Cold Cracking in Welds(I) - (용접부의 균열 및 그 방지(V) - 저온균열(I) -)

  • 박화순
    • Journal of Welding and Joining
    • /
    • v.20 no.5
    • /
    • pp.52-54
    • /
    • 2002
  • 저온균열은, 대한용접학회에서 발간한 '용접.접합용어사전'에 의하면, '용접 후 용접부의 온도가 대체로 $200^{\circ}C$ 이하의 저온에서 발생하는 균열을 총칭한다. 경우에 따라서는 실온까지 냉각한 후 일정한 기간이 경과한 후에 발생하기도 하며, 이러한 균열을 지연균열(delayed cracking)이라고 한다'로 되어 있다. 이들 저온균열의 발생에는 주로 구속응력과 경화조직 및 확산성수소가 영향을 미치고 있으며, 그 종류는 위에서 언급한 지연균열 외에 라멜라 테어링, 변형균열, 칭균열형 저온균열 등이 있다. 본 기술강좌에서는 용접부의 저온균열에 대하여 지연균열과 그 외의 저온균열로 나누어 2회에 걸쳐 소개하기로 한다.하기로 한다.

Studies on the Heterosis and Combining Ability for Heading Date of Wheat (소맥의 출수기에 대한 잡종강세 및 조합능력에 관한 연구)

  • Cho, C.H.;Maeng, D.J.;Hong, B.H.;Seong, B.R.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.25 no.1
    • /
    • pp.31-38
    • /
    • 1980
  • This experiment was carried out to study the heterosis and the GCA and SCA effects for days to heading of F 1 populations produced from eight wheat cultivar diallel. Greater heterosis for early heading was exhibited under the high temperature condition than under the low temperature conditions, and same results were also observed under short day condition rather than long day conditions. There are highly significant mean for GCA and SCA at all environmental conditions. Yecora F70 was showed the greatest effect, and Bezostaya and Blueboy were exhibited less effects of CCA for early heading. Significant GCA effect was expressed at high temperature and short day condition, indicating that this condition provides a better opportunity to select the materials for earliness. Selections of combination with greater effect of SCA for early heading such as Suweon 169 \times Yecora F70 were discussed for practical utilization.

  • PDF

Physiological and Ecological Studies on the Low Temperature Damages of Rice (Oryza sativia L.) (수도의 저온장해에 관한 생리 생태학적 연구)

  • 오윤진
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.26 no.1
    • /
    • pp.1-31
    • /
    • 1981
  • Experiments were conducted to investigate rice varietal response to low water and air temperatures at different growth stages from 1975 to 1980 in a phytotron in Suweon and in a cold water nursery in Chooncheon. Germination ability, seedling growth, sterility of laspikelets, panicle exertion, discoloration of leaves, and delay of heading of recently developed indica/japonica cross(I/J), japonica, and indica varieties at low air temperature or cold water were compared to those at normal temperature or natural conditions. The results are summarized as follows: 1. Practically acceptable germination rate of 70% was obtained in 10 days after initiation of germination test at 15\circ_C for japonica varieties, but 15 days for IxJ varieties. Varietal differences in germination ability at suboptimal temperature was greatest at 16\circ_C for 6 days. 2. Cold injury of rice seedlings was most severe at the 3.0-and 3.5-leaf stage and it was reduced as growth stage advanced. A significant positive correlation was observed between cold injury at 3-leaf stage and 6-leaf stage. 3. At day/night temperatures of 15/10\circ_C seedlings of both japonica and I/J varieties were dead in 42 days. At 20/15\circ_C japonica varieties produced tillers actively, but tillering of I/J varieties was retarded a little. At 25/15\circ_C, both japonica and I/J varieties produced tillers most actively. Increase in plant height was proportional to the increase in all varieties. 4. In I/J varieties the number of differentiated panicle rachis branches and spikelets was reduced at a day-night temperature of 20-15\circ_C compared to 25-20 or 30-25\circ_C, but not in japonica varieties although panicle exertion was retarded at 20-15\circ_C. The number of spikelets was not correlated with the number of primary rachis branches, but positively correlated with that of secondary rachis branches. 5. Heading of rice varieties treated with 15\circ_C air temperature at meiotic stage was delayed compared to that at tillering stage by 1-3 days and heading was delayed as duration of low temperature treatment increased. 6. At cold water treatment of 17\circ_C from tillering to heading stage, heading of japonica, I/J, and cold tolerant indica varieties was delayed 2-6, 3-9, and 4-5 days, respectively, Growth stage sensitive to delay of heading delay at water treatment were tillering stage, meiotic stage, and booting tage in that order, delay of heading was greater in indica corssed japonica(Suweon 264), japonica(Suweon 235), and cold tolerant indica(Lengkwang) varieties in that order. Delay of heading due to cold water treatment was positively correlated with culm length reduction and spikelet sterility. 7. Elongation of culms and exertion of panicles of rice varieties treated with low air temperature 17\circ_C. Culm length reduction rate of tall varieties was lower than that of short statured varieties at low temperature. Panicle exertion was most severaly retarded with low temperature treatment at heading stage. Generally, retardation of panicle exertion of 1/1 varieties was more severe than that of japonica varieties at low temperature. There was a positive correlation between panicle exertion and culm length at low temperature. 8. The number of panicles was increased with cold water treatment at tillering stage, but reduced at meiotic stage. As time of cold water treatment was conducted at earlier growth stage, culm length was shorter and panicle exertion poorer. 9. Sterility of all rice varieties was negligible at 17\circ_C for three days but 30.3-85.2% of strility was observed for nine-day treatment at 17\circ_C. Among the tested varieties, sterility of Suweon 264 and Milyang 42 was highest and that of Suweon 290 and Suweon 287 was lowest. The most sensitive growth stage to low temperature induced sterility was from 15 to 5 days before heading. There was positive correlation between sterility of rice plants treated with low temperature at meiotic and heading stage. 10. Percentage of spikelet sterility was greatest at cold water treatment at meiotic stage (auricle distance -15~-10cm) and it was higher in 1/1 (Suweon 264, Joseng tongil), japonica (Nongbaek, Towada), and cold tolerance indica(Lengkwang) varieties in the order. Level of cold water and position of young-ear affected on the sterility of varieties at meiotic stage; percentage of spikelet sterility of variety, Lengkwang, of which young-ear was located above the cold water level was high, but that of short statured variety, Suweon 264, of which young-ear was located in the cold water was lower. 11. Percentage of ripened grains was not reducted at 15\circ_C air temperature for three days at full heading stage in all varieties. However, at six-day low temperature treatment Suweon 287, Suweon 264 showed percentage of ripended grains lower than 60%, but at nine-day low temperature treatment all varieties showed percentage of ripened grains lower than 60%. Low temperature treatment of 17\circ_C from 10 days after heading for 20 days did not affect on the ripening of all varieties. 12. Uptake of nitrogen, phosphorous, potassium, calcium, and magnesium in whole plants was higher at average air temperature of 25\circ_C, but concentration of the elements was lower compared to those at 19\circ_C. However, both total uptake and concentration of manganese were higher at 19\circ_C compared to 25\circ_C. 13. Higher application of nitrogen, phosphorus, silicate, and compost increased yield of rice due to increased number of panicles and spike let fertility in cold water irrigated paddy.

  • PDF

Varietal Differences of Low Temperature Response at Booting Stage in Rice (벼 수잉기의 저온처리에 의한 품종간 반응)

  • 김기식;김재록;윤경민
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.34 no.1
    • /
    • pp.106-112
    • /
    • 1989
  • To investigate varietal differences of anther size, pollen shape, pollen fertility and other agronomic characters under low temperature condition. twenty rice varieties (5 Tongil and 15 Japonica type) were treated at 19$^{\circ}C$ water temperature from booting to heading stage. There was varietal difference of low temperature response which was indicated by the delayed heading, the shortening of culm and panicle length. and the decrease of grain fertility and yield potential resulted from cooling treatment at booting stage. The varieties with low fertility damaged by the low temperature treatment at booting stage showed low pollen density per anther. small or abnormal anthers and pollen, and many sterile pollens. Anther length was correlated significantly with the number of pollens per anther and pollen fertility.

  • PDF

Low Temperature Fluidity Test System of Composited Package Fuel Heater for Diesel Cars (디젤차량용 통합연료히터의 저온유동성 시험장치개발)

  • Jang, Young-Sung;Yoon, Dal-Hwan
    • Journal of IKEEE
    • /
    • v.18 no.2
    • /
    • pp.185-191
    • /
    • 2014
  • In this paper, we have implemented the low temperature fluidity test system with the composited package fuel heater, which has tested the low temperature fluidity and start time to evaluate the performance. Then we have compared the separation and the unified fuel heater type at $+20{\sim}-30^{\circ}C$. Also, we have tested the flowing pressure and start time, power consumption of heater. By comparing the performance with several condition, the experimental results obtain an improved start time of 23% and low temperature fluidity of 19%.