• Tribology and Lubricants
• /
• 제8권1호
• /
• pp.44-47
• /
• 1992

The performance of finite journal bearing operating in turbulent regime was investigated experimentally. In order to obtain experimental data containing surrounding conditions (thermal deformation, machining error etc.) of journal bearing, this study mounted a pressure sensor and a gap sensor on the journal. The data for continuous pressure profile and continuous film thickness profile were presented in this paper.

• Tribology and Lubricants
• /
• 제9권1호
• /
• pp.22-31
• /
• 1993

The thermohydrodynamic performance of large tilting pad journal bearings is analyzed, taking into account the three dimensional variation of lubricant viscosity. The eddy viscosity model based on wall formula is applied. The effects of temperature rise and turbulence on the bearing performance are studied in comparision with the isothermal or the laminar analysis. It is shown that these effects have significant influence on temperature distribution, load capacity and power loss of the bearing.

• Tribology and Lubricants
• /
• 제13권4호
• /
• pp.40-46
• /
• 1997

The externally pressurized air journal bearings which have two circumferential grooves with inherently compensated restrictors are analyzed. Two circumferential grooves with restrictors are made on the bearing surface in order to increase the stiffness and damping coefficients. In this paper, the dynamic characteristics such as stiffness and damping coefficients of this type of bearings are calculated. As a result of theoretical analysis, it is verified that there exist the groove depth and the distance between two grooves which generate the maximum stiffness at the given bearing dimensions.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.179-184
• /
• 2001

In order to improve the instability of plane journal bearing, it is introduced the leaf spring damper(LSD). The effects of dynamic characteristics of LSD on the stability of a plane Journal bearing were investigated theoretically. The improvements on the stability of a plane journal bearing with LSD are compared with the results of a floating ring journal bearing and of journal bearing without LSD. It found that a plane journal bearing with LSD will be an effective way in the improvement on the stability of rotor system.

• Tribology and Lubricants
• /
• 제17권2호
• /
• pp.130-137
• /
• 2001

In this paper, the thermal effects on the performance of floating ring journal bearing are investigated theoretically. The numerical analyses include pressure drop at inner film due to a centrifugal force, fluid momentum effects of supply oil into inner film and thermal effects in lubricating films. All performance data are presented as the rotating speed of journal from 10,000 rpm to 70,000 rpm.

• Tribology and Lubricants
• /
• 제10권1호
• /
• pp.27-34
• /
• 1994

An analysis based on the narrow groove theory is not suitable for the case of insufficient number of grooves or of non-rectangular shaped grooves. In this study, we present the solution of the compressible Reynolds equation for the air-lubricated hydrodynamic herringbonegrooved journal bearing with circular shaped grooves. From the results calculated numerically, optimal design values are obtained for the herringbone-grooved journal bearing.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.236-242
• /
• 2001

In this paper the effect of bump compliance, load, and the number of pad on the lift-off speed is studied. When the load is greater and bump compliance lower, the shaft is lifted off at higher rotating speed. And when the load is applied near the center of pad, lift-off speed is lower. When the number of pad increases, the lift-off speed is higher. The lift-off characteristics can be used to lengthen the life time of the coating and design the rotating machinery supported by bump bearings.

• Tribology and Lubricants
• /
• 제17권4호
• /
• pp.297-306
• /
• 2001

Under the condition of variable density and specific heat, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined within some degree of Journal misalignment. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the condition of variable density and specific heat play important roles in determining friction and load of Journal bearing at high speed operation.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.298-304
• /
• 1986

본 연구에서는 첨가할 고분자로서 윤활유에 일반적으로 점도지수 향상제로 사용되는 PIB(polyisobutylene)를 사용하여, 되도록 실제 베어링에 가까운 조건에서 Toms효과에 대해 알아 본다.

• Tribology and Lubricants
• /
• 제13권1호
• /
• pp.28-33
• /
• 1997

Results of theoretical investigations of the stability characteristics of externally pressurized air journal bearing, of which bearing is synchronously vibrate with respect to rotor, are presented. Linearized perturbation method is used to get the dynamic coefficients of air bearing, and the Routh-Hurwitz criterion is used to obtain stability map. The stability characteristics operating at zero steady-state eccentricity is investigated of various phase difference of bearing to rotor. It is shown that stability of air bearing is greatly influenced by synchronous motion of bearing, there exists optimum phase difference which gives maximum stability threshold.