• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1371-1372
• /
• 2015

최근 대규모 지진으로 인해 세계적으로 많은 인명 피해와 경제적 손실이 발생 하고 있다. 특히 특고압의 전기를 사용자가 요구하는 저압의 전기로 바꾸는 수배전반이 파손 되는 경우 발생하는 2차 피해는 큰 편이다. 본 논문에서는 수배전반의 지진으로 인한 2차 피해를 줄이기 위해 저가형 가속도 센서를 사용해 자동 복귀형 내진 마운트 시스템을 개발하여 수배전반의 파손으로 인한 피해를 줄이고 기존 면진 마운트 설비의 수명을 늘리고자 한다.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.151-152
• /
• 2016

최근 저압직류배전에 대한 연구가 급속도로 진행되면서 배전망에 적용되는 구성요소에 대한 연구가 활발히 진행 중이다. 본 논문에서는 대용량 수용가 배전반에 접속된 구성요소 중 배전계통으로부터 직류전력 공급하기 위한 양방향 DC/DC 컨버터, 수용가 직접 전력공급을 위한 직류 저압 태양광 발전시스템용 DC/DC 컨버터, 저압 직류 에너지저장시스템용 DC/DC 컨버터의 운전에 있어서 배전계통간 전력조류를 양방향 운전의 타당성에 대해 비교하고, 운용상 얻어지는 효율 개선 등에 대한 것을 비교 검토하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.819-820
• /
• 2016

Electrical power distribution is consists of high voltage, low voltage and motor control center(MCC). Motor control centers involves turning the motor on and off, it is configured electronic over current relay to detect a motor overcurrent flows. Existing electronic over current relay detects electrical fault such as overcurrent, undercurrent, phase sequence, negative sequence current, current unbalance and earth fault. However, it is difficult to detect mechanical fault such as locked rotor, motor stator and rotor and bearing fault. In this paper, we propose a condition monitoring and fault diagnosis system for electrical and mechanical fault detection of rotating machinery. The proposed system is designed with signal input and control part, system interface part and data acquisition board for condition monitoring and fault diagnosis, it was possible to detect electrical fault and mechanical fault through measurement and control of insulation resistance, locked rotor, MC counter and bearing temperature.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.329-331
• /
• 2008

전기에 의한 화재 발생시 재래시장은 소방안전관리체계나 일관된 지휘체계를 갖추고 있지 않아 화재발생시 적절한 대응을 하지 못해 많은 재산상 피해를 보게 된다. 전기에 의한 화재를 예방하기 위해서는 전기설비의 열화나 고장에 대한 절연저항 측정 또는 누설전류를 측정하는 등의 대책이 있으나 전기설비 열화나 고장은 비가시적이고 비노출식이므로 이를 상시 검출하고 감시할 수 있는 시스템 개발을 필요로 하게 된다. 따라서 본 논문에서는 전기화재에 취약한 재래시장용 전기안전 감시시스템 개발을 위한 준비단계로 먼저 고압이나 저압을 수전 받고 있는 국내 재래시장 17개소에서 수배전반, 분전반 등에 사용하는 차단기들의 종류와 용량 및 상가 분전반에 사용하는 차단기의 종류와 용량, 분기 회로수 등에 대한 조사 분석을 통해 재래시장용 전기안전 감시시스템의 기초자료로 활용하고자 한다.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.6
• /
• pp.55-65
• /
• 2019

With the rapid development of the national industry, the importance of electrical safety was recognized because of a lot of new electrical equipment are installing and the electrical accidents have been occurring annually. Today, the electrical equipments is inspect by using the portable Infrared thermal imaging camera. but the most negative element of using the camera is inspected for only state of heating, the reliable diagnosis is depended with inspector's knowledge, and real-time monitoring is impossible. This paper present the infrared thermal imaging safety diagnosis system. This system is able to monitor in real time, predict the state of fault, and diagnose the state with analysis of thermal and power data. The system consists of a main processor, an infrared camera module, the power data acquisition board, and a server. The diagnostic algorithm is based on a mathematical model designed by analyzing the Pearson's Correlation Coefficient between temperature and power data. To test the prediction algorithm, the simulations were performed by damaging the terminals or cables on the switchboard to generate a large amount of heat. Utilizing these simulations, the developed prediction algorithm was verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.22-33
• /
• 2021

In the case of open phase faults caused by the disconnection of distribution feeders interconnected to a PV system, many problems can occur depending on the core type and wiring method of the grid-connected transformers. Moreover, open phase faults are difficult to detect because the open phase voltage of the existing protection relay (Open Phase Relay (47)) can be maintained, even though a disconnection fault occurred, depending on the wiring method and the iron core type of the grid-connected transformer for a PV system. Therefore, this paper proposes a novel algorithm to detect open phase faults by comparing the currents and phases between the primary and secondary sides of a grid-connected transformer. In addition, this paper presents the modeling of a distribution system and protection devices for detecting open phase faults using PSCAD/EMTDC S/W, and implements a test protection device for detecting open phase faults based on the above-mentioned modeling. The simulation and test results confirmed that the proposed algorithm is useful for detecting open phase faults according to the wiring method and iron core type of grid-connected transformer for a PV system because operation slope and unbalance rate of the primary current exceed the setting value (30[%]) of the protection device.