• Journal of the Korean GEO-environmental Society
• /
• v.10 no.7
• /
• pp.33-41
• /
• 2009

In the case of underground power utilities pipe such as circular pipe, the most difficult problem is low compaction efficiency of the bottom of pipe inducing the failure of utilities. To overcome this problem, various studies have been performed and one of these is CLSM (controlled low strength materials) accelerated flow ability. CLSM has already been stage of commercial use in the foreign countries led by power company. In this study, we estimated the behavior of flexible pipe with flowable backfill materials and sand to compare on the DB24 load. The results showed that the deformation of flexible pipe is affected by types of backfill materials. CLSM shows better behavior characteristics than compacting sand. But numerical and analytical results that peformed to compare to the field test results showed big gap with the field results.

• The Journal of the Korea Contents Association
• /
• v.12 no.6
• /
• pp.361-370
• /
• 2012

The Purpose of this study was to find out the effects of frequency and intensity of transcutaneous electrical nerve stimulation(TENS) on the patients with chronic low back pain. The subjects were 32 patients with chronic low back pain average age 39.19 (${\pm}12.96$)years. The duration of chronic low back pain was 8.57 (${\pm}3.07$)months. The treatments were given 15 minutes once a day five a week for two weeks. to low back. Lumbar range of motion(ROM) and Oswestry Disabilitv Index(ODI)) was evaluated before and after TENS application. Each group was compared using Wilcoxon Mann-Whitney test. The results were as followings: Each group showed significant effect. High intensity group showed more effect in low frequency group. High intensity group showed more effect in high frequency group. Therefore, the high intensity can be used more effectively with high frequency for treating chronic low back pain.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.1
• /
• pp.75-83
• /
• 2010

Controlled low strength material (CLSM) is a flowable mixture and does not need to be compacted. It is produced by mixing portland cement, fly ash, fine aggregates, water and chemical admixtures. Sand is the most commonly used fine aggregates in the conventional CLSM, but it is getting more and more difficult to obtain sand in Korea. In this study, the characteristics of unconfined compressive strength, flow and applicability of a new CLSM that is produced by mixing of pond ash, fly ash, water, cement are examined. An unconfined compressive strength satisfies the standard unconfined compressive strength (0.5~1.0 MPa) were obtained when the mixture ratio of pond ash and fly ash is 30:70~70:30, cement ratio is 3.0~5.0%, and water content is 31~34%. The results of flow test indicate that the mixture ratio of pond ash and fly ash which satisfy the standard How value (0.2 m) is 30:70~70:30.

• 한국체육학회지인문사회과학편
• /
• v.56 no.4
• /
• pp.575-584
• /
• 2017

The purpose of this study was to examine the effects of low intensity resistance training speed on body composition, muscle activity and muscle strength in obese middle-aged women. The subjects (n = 12) were randomly assigned to normal resistance training speed group (NSG, n = 6) and slow resistance training speed group (SSG, n = 6). NSG was performed the for 3 sets ${\times}$ 35 times and total 3-s per repetition (eccentric: 1-s, isometric: 1-s, concentric: 1-s), and SSG performed for 3 sets ${\times}$ 15 times and total 7-s per repetition (eccentric: 3-s, isometric: 1-s, concentric: 3-s). Both groups performed the low intensity resistance training at 30% of 1-RM for 105-s per set, rest for 1 min between sets, rest for 3 min between exercises, and 2~3 times per week, for 4 weeks. The body composition, muscle activity and muscle strength were measured before and 4 week after resistance training. WHR at NSG and body fat at SSG were significantly decreased after resistance training compared with before (P<.05). Ｍuscle activity of biceps brachii, vastus medialis and vastus lateralis at both groups were significantly decreased after resistance training compared with before (P<.05, P<.01). Muscle strength of biceps curl and leg extension at both groups were significantly increased after resistance training compared with before (P<.01). However, body composition, muscle activity and muscle strength did not show statistically significant differences between the groups. Our results suggest that body composition, muscle activity and muscle strength should closely related to the performance time of resistance training (development time of muscle contraction), rather than resistance training speed (repetition frequency).

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.142-146
• /
• 2001

This research was undertaken on the use of bottom ash as a fine aggregate in Controlled. Low-strength Material(CLSM). The mixtures contained constant fly ash. And four different level of bottom ash with fly ash contents, 25%, 50%, 75%, 100% are investigated. Mixture proportions were developed for producing CLSM at three 28-day strength levels: removal with tools (less than $7kgf/cm^{2}$), removal by mechanical means (less than $200kgf/cm^{2}$), and removal with power equipment (less than $83kgf/cm^{2}$). To obtain these strengths, cement contents of 30, 60, and $120kg/cm^{3}$ were utilized. The compressive strength properties support the concept that by-product bottom ash can be successfully used in CLSM.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.1
• /
• pp.118-126
• /
• 2016

The purpose of this study is for old-aged women to analysis variation of Body composition and BMD so that help to keep healthy life by doing low-intensity workout. the subjects for this study consist of 20 persons being aged over 65 women, doing not regular workout, living in P metropolitan, and do workout for 12 weeks by catergorizing into 2 groups in half depending upon whether doing workout or not. Two-way Repeated Measures ANOVA of SPSS 18.0 was used for data processing. the statistical significant is set as p<.05. In result, there's none of dramatical difference in radius, ulna's BMD. there is dramatical difference in (%)Fat, WHR in workout group but none difference in LBM.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.6 s.237
• /
• pp.787-794
• /
• 2005

Nowadays chronic degenerative diseases such as arthritis are increasing rapidly, even though acute infectious diseases are decreasing due to the advance of modern medicine. Although many of remedies are developed for arthritis healing, there is no precise medical prescription, and pathogenesis is not examined exactly. In this study, we confirmed gene expression of BMP 1A, BMP 2B, osteonectin and MGP which are genes related with bone formation in osteoblast by using ultrasonic stimulation. Through this study, we also evaluated the fact that ultrasound could be applied to arthritis healing by making activated osteoblast induce remodeling of cartilage. As a result of this research, BMP 2B and MGP have higher rates of expression in specific ultrasound mode. In conclusion, it is expected that ultrasound could be used efficiently for healing arthritis if we use ultrasounds according to symptoms of arthritis on reasonable terms.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.178-179
• /
• 2017

In this study, the fundamental properties of cement mortar in relation to the change of the replacement ratio of the RA(Reject-Ash) were analyzed by mixing RA to the mixed aggregate consisting of poorly graded fine rock aggregate and marine aggregate for quality improvement. It was found that replacing 5% of the mixed aggregate with RA could improve the quality of the aggregate to the degree of fine rock aggregates.

• Journal of the KSME
• /
• v.30 no.2
• /
• pp.155-162
• /
• 1990

원유나 각종 석유 제품을 취급하는 구조물 또는 설비들의 부식 균열현상은 이미 오래 전부터 보 고되어 왔으며, 이는 주로 석유나 LPG 등에 포함되어 있는 H/SUB 2/S에 의한 황화물 응력부식 (SSCC:sulfide stress corrosion cracking)으로 널리 알려져 있다(1,2). SSCC에 의한 균열 현상은 일반 저강도 철강재에서는 발생하지 않으며 주로 항복강도가 500MPa 이상의 강재에서 많이 나타 난다. 특히, 구조물이나 설비제작 과정에서 반드시 있게되는 용접부는 SSCC에 아주 민감한 부분 으로써, 대부분의 SSCC 균열이 용접 열영향부(HAZ:heat affected zone)에서 나타나고 있다. 이는 용접부의 미세조직이 모재와 달라 국부적으로 높은 경도를 갖는 부분이 있기도 하고, 또한 운전 조건으로는 만족되지 않는 응력부식 조건이 용접 잔류응력에 의해 만족될 수 있기 때문이기도 하다. 본 글에서는 이러한 SSCC에 의한 균열 특성을 SSCC기구 (SSCC mechanism)와 함께 석유화학 설비재료로 많이 사용되는 철강재를 대상으로 고찰해 보고자 한다.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.5
• /
• pp.189-195
• /
• 1998

콘크리트 구조물이 초기재령에서 외기에 노출될 때, 수부확산으로 인하여 수분의 이동이 일어나고, 또한 자체건조도 발생한다. 이러한 콘크리트 내부의 수분확산과 자체건조에 의하여 콘크리트의 위치에 따라 상대습도가 변호한다. 특히 고강도 콘크리트의 경우에 단위 시멘트량을 많이 사용하기 때문에 , 초기재령에서 콘크리트 단면의 수분분포는 자체건조에 의하여 큰 영향을 받는다. 본 연구에서는 초기재령에서 외기에 노출된 콘크리트 내부의 여러 위치에서 상대습도를 측정하였다. 또한 자체건조로 인한 콘크리트의 상대습도 변화를 측정하여 초기재령에서 수분확산과 자체건조가 콘크리트 내부의 각 위치에서 상대습도에 미치는 영향을 검코하였다. 그리고 수분확산 이론에 의하여 해석결과와 실험결과를 비교하여 \ulcorner재령에서 수분확산 이론의 타당성을 검증하였다. 저강도 콘크리트 단면의 수분분포는 주로 수분확산에 의하여 영향을 받았으며, 자체건조의 영향은 매우 작게 나타났다. 그렇지만 고강도 콘크리트는 수분확산 뿐만 아니라 자체건조에 의하여도 영향을 받았다. 또한 수분확산 이론에 의한 해석결과는 실험결과를 잘 예측하였다.