• International Journal of Highway Engineering
• /
• v.4 no.1 s.11
• /
• pp.161-170
• /
• 2002

This study is a fundamental research for recycling waste polyethylene film(WPF) in asphalt concrete for roadway pavement. The objective of this study is to develop technology of making waste polyethylene asphalt mixture and evaluate properties of the asphalt concrete containing WPF. Asphalt concrete for surface course of pavement was produced through an appropriate mix-design using dense-graded and gap-graded aggregates. Marshall mix design, indirect tensile strength test, wheel tracking test and tensile fatigue test were performed. Test result showed that some WPF asphalt mixtures had a high tensile property and good resistances against rutting and fatigue cracking, compared with normal asphalt mixture.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.05a
• /
• pp.317-321
• /
• 2005

본 연구결과, 콜레스테롤 제거 크림치즈를 만들기 위한 유지방 함량 36%의 크림의 콜레스테롤 제거 최적 조건은 adipic acid로 가교시킨 ${\beta}-CD$ 첨가량 10%, 교반온도 $20^{\circ}C$, 교반시간 30분, 교반속도 800rpm 이었으며, 이 때 콜레스테롤 제거율은 평균 91.42%로 나타났다. 가교화 ${\beta}-CD$ 처리 크림치즈의 관능검사 결과, 가교화 ${\beta}-CD$ 처리 크림치즈는 control과 powder ${\beta}-CD$ 처리한 크림치즈에 비해 저장 기간 동안 쓴맛의 증가가 거의 없었고, 빵에 발리는 정도도 매우 우수하였으며, 전체적인 기호도 또한 높았다. short-chain fatty acid의 경우 저장 기간이 지남에 따라 가교화 ${\beta}-CD$ 처리 크림치즈는 control과 powder ${\beta}-CD$ 처리한 크림치즈에 비해 저급 지방산 생성에 변화가 거의 없었다. 조직검사에서 가교화 ${\beta}-CD$ 처리 크림치즈는 저장 기간 동안 control에 비해 응집성, 탄력성, 점착성의 변화가 없으며 그 수치가 높게 평가되었다. 또한 가교화 ${\beta}-CD$의 재활용률은 97.82%로 매우 높게 나타났다. 위 실험 결과에 따르면, 가교화 ${\beta}-CD$는 콜레스테롤 제거율이 높으며, 제품에 적용 시 품질이 향상될 뿐만 아니라, 재활용률도 높아 이를 유가공 산업에 다양하게 활용이 가능할 것으로 기대된다.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.129-140
• /
• 2012

The objective of this study was to estimate the practical recycling rate of plastic products, so that the study was conducted to build material flow diagram for PVC profile. For this objective, product generation, waste generation and recycling status were investigated. Using collected and analyzed status data, analysis of material flow by product and building material flow diagram were conducted. As result of estimating the recycling rate by product, The sum of domestic demand was 525,448 ton and waste generation was 105,853ton in PVC flooring and profile. The sum of generation of recycling product and raw material was investigated to be 76,004ton(14.46%), which is higher compared to recycling obligation(8.5%) in 2009. To build the material flow diagram in the years(5~20years) ahead, prediction of future demand was based on the assumption that there will be no difference in annual generation of current and future. As the recycling rate of flooring and profile increases, it is estimated to reach 20% in 2013 according to the material flow diagram.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.3-15
• /
• 2009

To accomplish the greenhouse gas reduction which is over core unit project of the "Green growth" policy and "Resource circulation society", it is important to maintain proper balance and complement between energy recovery from waste and material recycling. This research(study) examined the related policies on the past of korea and foreign country, and also "The 4th resource recycling master plan" and "Energy recovery from waste plan" to provide advisable direction for resource recycling policy. The results of the research(study) showed that there were no significant difference between korea and developed foreign countries waste management policies. But in German policy, energy recovery from waste and pre-treatment are importantly considered and highly required for permission. Under current circumstance in korea, recycling will be more difficult than in the past. According to "The 4th resource recycling master plan", film type of synthetic resin was not sustainable recycled material in substance."Energy recovery from waste plan", proved that the energy recovery from RDF/RPF have lower efficiency than regular incineration generation and substance recycling. To solve these problems, the energy and remainder heat recovery must be generalized to "Energy recovery" concept and institutional improvement such as LCA(Life Cycle Assessment) system are need to support it. And also technology development to extract synthetic polymer by dissolved film type of synthetic resin must be provided.

• Corrugated packaging logistics
• /
• no.56 s.12
• /
• pp.29-30
• /
• 2004

• Magazine of RCR
• /
• v.9 no.1
• /
• pp.29-33
• /
• 2014

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2001.04a
• /
• pp.148-151
• /
• 2001

• The monthly packaging world
• /
• s.90
• /
• pp.125-135
• /
• 2000

• The monthly packaging world
• /
• s.85
• /
• pp.177-181
• /
• 2000

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2001.05a
• /
• pp.39-42
• /
• 2001