• Title/Summary/Keyword: 재활용건설재료

Search Result 125, Processing Time 0.022 seconds

Experimental Study on Dynamic Characteristics of Vibration-Controlled Concrete Beam (제진 콘크리트 보의 동적특성에 관한 실험적 연구)

  • 정영수;최우성;이대형
    • Magazine of the Korea Concrete Institute
    • /
    • v.9 no.6
    • /
    • pp.185-193
    • /
    • 1997
  • 본 연구는 각종 제진재료를 이용하여 진동을 억제할 수 있는 콘크리트를 개발하여 각종 건설공사에서 흔히 발생할 수 있는 진동공해문제를 억제하고자 하며 아울러 폐기물의 재활용차원에서 폐자재를 이용하여 유용한 제진콘크리트를 개발하고자 하는데 그 목적이 있다. 우선, 제진재료를 이용한 압축강도 (200kg/$\textrm{cm}^2$)이상의 콘크리트 배합비를 찾기 위하여 24배치의 예비실험을 수행하였으며, 선정된 적정배합비에 따른 제진재료를 이용한9개의 진동시험체보를 제작하여 보의 구조적 및 재료적 동적특성 즉 1차 공명진동수와 동적 휨강성 및 감쇠비를 측정하여 제진효과를 조사하였다. 그리고 압축강도에 의한 각 시험체의 균열모멘트를 추정하여 재하하중과 균열모멘트비(M/Mcr)에 따른 하중단계별 동적특성값을 살펴보았다. 제진재료로서는 라텍스(Latex), 고무분말(Rubber Powder)그리고 플라스틱 레진( Plastic Resin)등을 사용하였고, 재료적, 구조적 진동감쇠효과를 파악하고자 KS F2437규정과 진동파의 속도법을 사용하였으며, 감쇠비 측정은 Frequency Spectrum 곡선에 대한 Polynomial Curvefitting 방법과 기하학적 해석방법을 이용하여 각각의 결과를 비교.분석하였다.

Flow and Strength Characteristics of the Lightweight Foamed CLSM(Controlled Low-Strength Materials) with Coal Ash (석탄회를 활용한 경량기포유동화재의 플로우 및 강도 특성)

  • Lee, Seungjun;Lee, Jonghwi;Chae, Hwiyoung;Chun, Byungsik
    • Journal of the Korean GEO-environmental Society
    • /
    • v.12 no.10
    • /
    • pp.73-82
    • /
    • 2011
  • Coal ash of industial by-products was not recycled about 30% in total emissions. Moreover, it caused environmental pollution as well as wasted unnecessary expenses and time. Currently, fly ash(FA) is recycled as construction material however ponded ash(PA) is mostly buried. Lightweight foamed Controlled Low-Strength Materials(CLSM) evaluated in this study reduces unit weight by mixing foam in the traditional Controlled Low-Strength Material and has lightweight and flowability to be available for backfill materials in construction. Flow test, unconfined compressive strength test, and foamed-slurry unit weight test were performed in this study and the applicability of lightweight foamed CLSM for construction materials was evaluated. The results indicate that the mixture ratio(PA:FA) ranging from 70:30 to 50:50, cement of 7%, foam of 2~3%, and water content of 26.5~29.5% were required to satisfy the following standards such as flow value(i.e., 20cm), unconfined compressive strength(i.e., 0.8~1.2MPa), and foamed-slurry unit weight(i.e., $12{\sim}15kN/m^3$).

Determination of Mix Design and Target Strength for Lightweight Soils using Recycled material (폐기물을 첨가한 경량혼합토의 배합설계와 목표강도 결정)

  • Yoon, Gil-Lim;Bae, Yoon-Shin
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2010.03a
    • /
    • pp.468-474
    • /
    • 2010
  • 최근 국내에서 연약지반개량을 위하여 적극 도입되기 시작한 차세대 지반처리기술인 경량혼합토공법의 배합설계에 대한 고찰을 하였다. 경량혼합토는 건설잔토나 준설토 및 현장에서 발생하는 점토나 실트질 흙을 사토처리 하지 않고 현장에서 유용할 수 있는 매우 경제적이고 환경적인 공법으로서 일본에서는 지난 10여년에 연간 수백만톤의 경량혼합토를 생산하여 건설현장에 적용한 실적을 보유하고 있다. 특히 폐자원(폐타이어가루, 왕겨)을 경량혼합토에 첨가하여 건설재료 재활용을 위한 역학적 실험을 수행하였다. 본 연구에서는 경량혼합토를 제작하기 위해 필요한 배합설계변수인 원료토의 중량, 함수비 및 기포재와 첨가할 물의 양, 그리고 강도를 발현하기 위하여 필요한 고화재로서 시멘트첨가량에 대한 최적의 배합설계에 대한 분석을 하였다. 지금까지 제안된 시멘트함유량은 초기의 경량혼합토 목표강도가 주어지면 원료토의 조건에 따라 원하는 비중과 강도를 토대로 적절하게 현장에 적합하게 결정하는 단계에 있으나 일부 현장에서 지나친 목표강도 설정으로 과대한 시멘트를 사용하는 사례가 많아 국가적으로 막대한 손실을 초래하고 있다. 본 논문에서는 경량혼합토의 목표강도을 분석하고 그에 따른 최적의 시멘트함유량을 제시하고자 한다.

  • PDF

Compressive Strength Evaluation of Concrete with Mixed Plastic Waste Aggregates Filled with Blast Furnace Slag Fine Powder (무기충진재를 혼입한 복합 폐플라스틱 골재를 활용한 콘크리트 압축강도 특성)

  • Lee, Jun;Kim, Kyung-Min;Cho, Young-Keun;Kim, Ho-Kyu;Kim, Young-Wook
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.9 no.3
    • /
    • pp.253-259
    • /
    • 2021
  • Plastic wastes generated from household waste are separated by mixed discharge with foreign substances, and recycling is relatively low. In this study, the effect of the ratio and content of mixed plastic waste coarse aggregate(MPWCA)s and mixed plastic waste fine aggregate(MPWFA)s filled with blast furnace slag fine powder on the slump and compressive strength of concrete was evaluated experimentally. The MPWCAs were found to have a similar fineness modulus, but have a single particle size distribution with a smaller particle size compared to coarse aggregates. However, the MPWFAs were found to have a single particle size distribution with a larger fineness modulus and particle size compared to fine aggregates. Meanwhile, the effect of improving the density and filling pores by the blast furnace slag fine power was found to be greater in the MPWFA compared to the MPWCA. As the amount of the mixed plastic waste aggregate(MPWA)s increased, the slump and compressive strength of concrete decreased. In particular, the lower the slump and compressive strength of concrete was found to decrease the greater the amount of MPWFA than MPWCA when the amount of MPWA was the same. This is because of the entrapped air and voids formed under the angular- and ROD-shaped aggregates among the MPWFAs. On the other hand, the addition of the admixture and the increase in the unit amount of cement were found to be effective in improving the compressive strength of the concrete with MPWAs.

A Study of Application on Waste Tire Blocks Filled with Concrete (폐타이어 콘크리트 블록의 활용 방안에 관한 연구)

  • Shinl, Eun-Chul;Lee, Chang-Sub
    • Journal of the Korean Geosynthetics Society
    • /
    • v.2 no.2
    • /
    • pp.25-31
    • /
    • 2003
  • Most recently, environmental problems arise from management waste tires by increasing number of automobiles. Waste tires are not compressible and not easy for degradation in landfill. Even if it were landfill, it is difficult to treat. Total amount of waste tires is about 20 million per year and the collection is 68.6% in this country. Structure of slope stability using waste tire blocks filled with concrete increases durability, reduce construction period, and it can be utilized as an example. Therefore, it reduces the volume of waste and recycles waste. Also, it prevents the air pollution due to the incineration and creates economic value.

  • PDF

Backfill Materials for Underground Facility with Recycling Materials - Quantification of Design Parameters (재활용재료를 이용한 지하매설물용 뒤채움재 - 설계입력변수 정량화)

  • Lee, Kwan-Ho;Kim, Seong-Kyum
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.11 no.3
    • /
    • pp.91-96
    • /
    • 2011
  • The design, construction and management of underground facilities as infrastructure of nation should be properly carried out. One of reasons for underground facilitie's failure is a non-proper construction of backfill materials. This is common for circular underground pipes. A non-proper compaction is the cause of settlement and decrease of performance of underground facilities. The use of controlled low strength materials is an alternative to reduce the couple of failure problems. The flowability, self-cementation, and non-compaction are the major advantages to use the controlled low strength materials. In this research, couple of recycled materials, such as in-situ soil, water-treatment sludge, and crumb rubbers, were adopted. The basic properties of each materials were determined according to KS or ASTM. Also, couple of laboratory tests were carried out to get the design parameters for geotechnical and roadway area.

Properties of Eco-Construction Material Using Recycled Sewage Sludge Ash (하수슬러지 소각재를 재활용한 친환경 건설 소재의 재료적 특성)

  • Jo, Byung-Wan;Lee, Jea-Ik;Park, Seung-Kook;Lee, Jae-Seung
    • Journal of the Korea Concrete Institute
    • /
    • v.19 no.6
    • /
    • pp.667-676
    • /
    • 2007
  • As the 21st century began, cement and concrete that are representatives of modem building materials became a major factor in global warming, air pollution and environmental pollution. Also, the problems that are generated while pursuing high performance and high strength became social issues. Therefore, it has become urgent to prepare counter plans. This study has aimed at the recycling of sewage sludge ash and developing it as a new concept in building material which serves the environmental considerations for long-lasting developmental purpose. Also, the study aimed to find a substitute for scarce natural resources and to secure high techniques for waste recycling. The purpose of this study was also to solve fundamentally secondary environmental pollution. The results revealed that the chemical components of sewage sludge ash are mainly $SiO_2\;and\;Al_2O_3$ which are similar to the components of pozzolan. Also, it was identified that sewage sludge ash can be utilized as a hardened specimen with an alkali activated pozzolan reaction. Considering the possibility of appropriate strength development and the advantage of drying shrinkage, compared with that of cement, it was believed that sewage sludge ash can demonstrate a function as a substitute for cement given.

재생 골재 및 굳지 않은 재생 콘크리트의 성질

  • 구봉근;김창운;라재웅;서사범;류택은;이현석
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 1998.11a
    • /
    • pp.315-320
    • /
    • 1998
  • 최근에 도시의 재개발계획 및 도시환경정비 등에 의해 해체되는 구조물이 증가하여 폐콘크리트의 발생량은 증가하고 있어, 이를 이용한 재생골재의 재활용이 필요한 실정이다. 그러나, 현재 생산되고 있는 재생골재는 기초적 물성이 천연골재와 비교하여 상대적으로 열악하여 이를 이용한 재생콘크리트는 일반 골재를 사용한 콘크리트에 비하여 시공성 및 굳은 콘크리트의 공학적 특성 및 내구성 저하에 대한 우려로 건설구조재료로서의 사회적인 신뢰도가 낮은 실정이다. (중략)

  • PDF

Verification of Capacity of Dry-mortar Recycled Blast Sludge as Functional Finishing Material (기능성 마감재로서 현무암 석분슬러지를 재활용한 드라이몰탈의 성능검증)

  • Ko, Dong-Woo
    • The magazine of the Korean Society for Advanced Composite Structures
    • /
    • v.5 no.4
    • /
    • pp.21-28
    • /
    • 2014
  • 최근 증가하는 현무암 석분슬러지를 건설재료로 재활용하기 위한 방안으로, 시멘트 몰탈에서 잔골재의 일부를 현무암석분슬러지로 대체한 후, 기능성 마감재로서의 성능을 검증한 결과 다음과 같은 결과를 얻었다. 1. 현무암 석분슬러지를 포함한 몰탈의 휨인장강도와 압축강도는, 대체율 21%에 도달할 때까지 압축 및 휨인장강도는 일반 시벤트몰탈 대비 각각 47%와 35% 증가하였다. 2. 원적외선 방사율에 있어서도 기존몰탈보다 높은 0.933까지 이르렀으며, 이 수치는 기타 기능성 마감재보다 우수한 원적외선 방사율을 나타내는 것이다. 3. 음이온 방사량은 현무암석분의 대체율에 따른 일관된 경향을 보이지는 않았으나, 일반 시멘트몰탈 보다는 5% ~ 12% 증가효과가 나타났다. 4. 기존 시멘트몰탈의 잔골재의 21%를 현무암석분슬러지로 대체할 경우, 시멘트 몰탈보다 물리적 성질이 증가 함과 동시에, 기능성몰탈로서의 원적외선 방사율, 음이온 방사량의 증진효과가 있었다. 또한 새로운 건축자재의 생산을 통한 경제적 이득은 물론, 산업폐기물의 양을 줄일 수 있다.

  • PDF

Properties of Slag Gravel (슬래그 골재의 특성)

  • 서상교;최정호
    • Magazine of the Korea Concrete Institute
    • /
    • v.13 no.1
    • /
    • pp.66-72
    • /
    • 2001
  • 지구 온난화, 천연 자원의 고갈, 처분 장소의 핍박 등 환경문제가 사회적인 문제로 대두되고 있다. 특히 건설분야에서 천연산 골재의 부족은 매우 심각한 상황에 있으며, 이를 해결하기 위해 재생골재의 재활용 등 많은 연구가 이루어져 1999년도에는 아스팔트 콘크리트용 재생골재(KS F 2572), 콘크리트용 재생골재(KS F 2573), 도로기층용 재생골재(KS F 2574)에 대한 규격을 제정함으로써 실용화의 단계에까지 이르고 있다 그러나 제철소의 제강 및 정련 공정상에서 발생하는 철강슬래그를 콘크리트용 골재로서 활용하기 위한 국내의 연구는 몇몇 연구자들에 의해서만 이루어지고 있어 초기 단계에 있다고 할 수 있다. 이에 본고에서는 콘크리트용 천연산 골재의 대체 재료로서 각종 철강슬래그의 적극적인 재활용을 도모하기 위해 최근 슬래그를 골재로서 사용하기 위해서 연구한 결과 및 실례를 수록한 문헌을 조사 검토하여 슬래그 골재의 특성에 대하여 소개하고자 한다.