• Journal of the Korean Geotechnical Society
• /
• v.30 no.8
• /
• pp.39-47
• /
• 2014

Frost heaving and thawing settlement cause unexpected stress around buried pipelines, which results in deformation and permanent demage. A large scale laboratory test has been performed to observe deformation, stress, and temperature of a buried pipe during atmospheric temperature changes. From the experimental results, the stress concentrated around the buried pipe is inevitable and deformation is caused by the frost heaving. Even though backfill materials are sandy soils which are normally assumed to be non frost susceptible, it is revealed that frost demage can happen due to drainage condition, the level of ground water table, and water content.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.120-127
• /
• 2011

Recently, there are problems due to the exhaustion of natural aggregate resources, and strict restrictions. In this study, the possibility of using Water Granulated Ferro-Nickel slag as a substitutive material of fine aggregate is determined from the properties of mechanical and durability for the concrete that is made with Water Granulated Ferro-Nickel slag. According to the test results, when the mixing rate of Water Granulated Ferro-Nickel Slag aggregates concrete is adjusted, up to 50% of its aggregates by mixing rate can be mixed with general aggregates. The optimum mix ratio is considered to be 40%. The freezing and thawing resistance of Water Granulated Ferro-Nickel Slag aggregates concrete is identical to that of general aggregates concrete, while the carbonation resistance is found to be same as or lower than that of general aggregates concretes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.295-301
• /
• 2019

Currently, the most commonly used decontamination agent in the country is calcium chloride, and the use of decontamination agents nationwide is on the rise due to climate change in the country. The deicing agent, aimed at deicing snow, is sprayed and the chloride is frozen and thawed by the dissolved surface water, causing various damages such as deterioration to the concrete. Therefore, in this study, the reactive urethane polymer was manufactured to coat concrete surface protection material, which is a method that prevents moisture from externally penetrating by applying to concrete surfaces, and the mixing agent was selected through the size control of molecules and surface modification, and the properties of penetrant stiffening agents and the application method of concrete was evaluated.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.9
• /
• pp.19-27
• /
• 2009

In order to investigate anti-freeze process of precast concrete L-type retaining walls in cold regions, test walls were installed in the campus of Kitami Institute of Technology (KIT, Hokkaido, Japan). The wall consists of following three sections, i) back filled with frost susceptible clay soil, ii) using thermal insulation material, and back filled with frost susceptible soil, iii) back filled with frost-unsusceptible soil. The freezing front distribution and ground temperature within the backfill were observed and deflections of the walls were measured over three freeze-thaw seasons. Some understanding of the mechanisms of the build-up of frost heave pressure was gained, and the effectiveness of replacement method was observed. A simulation was performed to predict the shape of the freezing front in the backfill behind L-type walls with various cross sections. These findings were employed to propose a method for determining the appropriate zone to be replaced with frost unsusceptible backfill material in cold regions.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.697-714
• /
• 2023

The Tracksite of Cretaceous Dinosaurs and Pterosaurs in Jeongchon, Jinju was discovered in late 2017 during the construction of the Ppuri industry complex. This site is a natural heritage site with a high paleontological value, as it preserves fossils of various types of dinosaurs, pterosaurs, and animal traces at a dense concentration. In this study, we surveyed that physical weathering such as joint, crack, scaling, exfoliation, and fragmentation occurred through field research in the fossil site, and conducted basic research on conservation science to reduce the damage. To this end, among the eight levels identified after excavation, the rocks of Level 3, which yielded a large number of theropod footprint fossils, and Level 4, which yielded pterosaur footprint fossils, were analyzed for material characteristics and evaluation of the effectiveness of consolidation and adhesion. This results showed that the rocks in the Level 3 stratum were dark gray siltstone and the rocks in the Level 4 stratum were dark gray shale, which contained a large amount of calcite and were composed of quartz, plagioclase, mica, alkali feldspar, and other clay minerals, which are likely to be damaged by rainfall under external conditions. As a result of conducting an artificial weathering experiment by dividing the probationary sample into four groups: untreated, consolidation treatment, anti-swelling treatment, and adhesive treatment, the consolidation and the swelling inhibitor showed an effect immediately after treatment, but did not show a blocking effect under a freezing-thawing environment. The adhesive showed that the adhesive effect was maintained even under freezing-thawing conditions. In order to preserve the fossil sites at Jeongchon in the future, in addition to temporary measures to block the inflow of moisture, practical measures such as the construction of protective facilities should be prepared.

• Journal of Embryo Transfer
• /
• v.26 no.3
• /
• pp.195-199
• /
• 2011

The objective of this study was to evaluate the efficiency of the conventional slow freezing and vitrification methods for cryopreserving in vivo and in vitro-produced bovine embryos. Morphology of post-thawed embryos was evaluated and normal embryos were used for successive culture for 72 h. In experiment I, In embryo viability, There was no significant differences in blastocyst re-expansion rates were found between in vivo and in vitro embryos(89.6% vs. 81.5%). whereas hatched-BL and total cell number rates was significantly higher (p<0.05) for in vivo-derived embryos (76.9%, 136${\pm}$3.6 vs. 43.4%, 107${\pm}$3.8). In experiment II, There was no significant differences in blastocyst re-expansion and Expansion-BL rates were found between in slow freezing and vitrification methods (91.3% vs. 85.7% and 71.4% vs. 75.0%, respectively). in conclusion, These results suggested that the field application for bovine embryo transfer is in part supported by improvements of technologies in embryo conventional slow freezing and vitrification cryopreservation.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.143-155
• /
• 2018

In this study, we investigated the properties and manufacturing methods of soil mural finishing layers fabricated using animal glue, starch adhesive(wheat paste), and Dobak glue. We assessed the workability and weatherproofing properties of the earthen plaster and finishing layers fabricated using concentrations of 3%, 5%, 7% and 10% for each adhesive. The results showed that a mixture using 3% or 5% starch adhesive or 3% Dobak glue was suitable for constructing the finishing layer. For finishing layers made with animal glue, earthen plaster had poor workability. It was dry and easily broken as the concentrations of animal glue increased. However, specimens made with low concentrations of animal glue did not exhibit surface deterioration after a freezing-thawing test. Therefore, animal glue mixtures could possibly be used for constructing finishing layers in concentrations lower than 3%. Mixtures containing starch adhesive produced plasters with good workability. Additionally, starch adhesive enhanced compression strength. However, when starch adhesive was mixed at concentrations above 7%, the surface exhibited roughening and staining in freezing-thawing tests. When Dobak glue was used in mixtures, it enhanced compression strength, but concentrations above 5% produced specimens with surface cracking. For concentrations of 3%, there were no cracks and the specimens were stable after freezing-thawing tests, so concentrations below 3% of Dobak glue are suitable for constructing finishing layers. We expect this study will be useful for restoring the traditional technology of soil mural finishing layers and suggest using adhesives to construct the finishing layer.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.217-224
• /
• 2007

This study reports the properties of high early strength & durability of concrete using PC admixture. To apply these data to construction site, we did the lab tests. The target of this study is to accomplish early strength of concrete (5.0 Mpa/18 hr), and we did the durability tests such as length change test, chloride ion penetration test, fleeting and thawing test, adiabatic test, etc. And we tested the porperties of concrete by the different factors, such as the type of admixtures, curing temperature, the amount of binder, etc. Through the test of concrete using the different type of admixture, PC type was more excellent than PNS type admixture. As a result, we made a concrete of high early strength concrete, and excellent durable concrete. According to these tests, we concluded that we can apply this type of PC admixture to the civil & construction site, and we can reduce the term of works and finally we will accomplish the economical construction.

• Korean Journal of Animal Reproduction
• /
• v.22 no.2
• /
• pp.171-176
• /
• 1998

This study was carried out to confirm whether the in vivo developmental potential of mouse hatched blastocysts (HBs) can be obtained by vitrification method using the cryoprotectant EFS35. The HBs ($\theta$ 130$\mu\textrm{m}$) were cultured in vitro until day 5 from zygotes produced in vivo and were equilibrated in 10% ethylene glycol(EG) for 5 min, and then were exposed or vitrified in EFS35 (35% EG, 18% Ficoll and 0.3M sucrose). After 30 min thawing, re-expanding HBs were transferred into one or both uterine horns of pseudopregnant recipients on day 3 (4~6 embryos /horn). Pregnancy rates of recipients and implantation were assessed by autopsy on day 15 of gestation. The results obtained in these experiments were summarized as follows : After thaw-ing, in vitro survival of HBs was not significantly different between exposed (65.5%) and vitrified(54.5%) group. Also, when the in vivo development potential was examined, total implantation was not different between control (58.5% ) and vitrified (41.0%) group, although the live fetus formation of vitrified group (24.0%) was significantly lower than that of control (58.3%) group (p< 0.05). These results suggested that vitrification freezing method of mouse HBs using EFS35 can be used to make wide the utility of embryo transfer of the more embryos produced in vitro.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.125-133
• /
• 2011

The requirement for durability of concrete bridge deck is increasing as the deterioration for the concrete bridge deck exposed to severe environment has been increased. For this reason, the concern about high-durable concrete is being high. Recently, a metakaolin is highly spotlighted as new admixture because its strength and durability are equivalent to silica fume. On the other hands, there are few researches for the metakaolin concrete bridge deck in domestic. So many various long-term data on the mechanical property and durability is needed to apply metakaolin concrete at the concrete bridge deck construction field. This study is aim to evaluate the long-term mechanical properties and durability of metakaolin concrete bridge deck with curing age. Mechanical properties are estimated by the compressive and flexural strength, and the drying shrinkage, the chloride resistance, the scaling, and freezing and thawing characteristics are compared with curing age. According to the results, when the metakaolin concrete is used, the development of compressive and flexural strength proceed in both the early and old ages. It is also improved the resistance of chloride penetration, freezing and thawing in concrete. It was showed that replacement of metakaolin was efficient for the reduction of the drying shrinkage.