• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.39-48
• /
• 2017

CDMA (Code Division Multiple Access) is promising medium access control schemes for underwater acoustic sensor networks because of its robustness against frequency-selective fading and high frequency-reuse efficiency. In this paper, we design diversity schemes of underwater CDMA transceiver for the forward and reverse links. User data are multiplexed by Walsh code and a pseudo random noise code acquisition process is added for phase error correction before decoding the user data at the receiver. Then, the diversity reception using equal gain combining and maximal ratio combining is performed in order to minimize performance degradation caused by rich multipath fading of underwater acoustic channel. We evaluated the performance of diversity transceiver through lake experiment, which was performed at Lake Kyungcheon, Mungyeong city using two transmitters and two receivers placed 460 m apart at an average depth of 40 m. The lake experiment results show that user data are recovered with error-free in both of the forward and reverse links.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.25-33
• /
• 1999

This paper proposes a handover algorithm for the mobile host in order to reduce the number of unnecessary retransmissions during handover. In our proposal, the home agent buffers user data after receiving the registration request message form the foreign agent and then transmits them again after a predefined time. We also analyze the packet disordering probability between two user data under an assumption that the home agent generates all user data. One of two user data is the one which has been generated just before the home agent receives the registration request message and the other is generated just after that. Simulation results show that our proposal provides efficient handover for a mobile host by reducing the packet disordering probalility.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.11-17
• /
• 2003

In this paper, we implemented 2-wire (data gnd) RS232C serial communication interface by applying the Collision Sensing Multiple Access(CSMA) Protocol. The transmitting and receiving wires of RS232C pert are connected together by the interface circuit forming data wire without hardware modification On two-wired common channel connection simultaneous transmission Don mere than two hosts causes data collision. The collision is detected by loop-back test of transmission data comparing with the fed back data to detect the data distortion. Various models are adopted to reduce the probability of retransmitted data collision and experiments show the performance of each cases. Due to allowing multiple hosts to be accessed through the common communication channel with minimum circuit addition the result of this paper can be easily applied for conventional RS232C instruments and machines to connect to the single data communication line.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.55-61
• /
• 2002

Real-time Internet multi-media services requires fast data transmission, QoS and IP multicast. MARS is proposed to support IP multicast in the ATM Networks based on Internet, and RSVP is proposed to guarantee QoS in the Internet which is originally based on only best-effort service. In this paper, we propose two mechanisms to support IP multicast service involving QoS support over the ATM networks with MARS architecture based on multiple MCSs. In the first mechanism, when an ATM host requests joining into a specific multicast group, the MARS selects a proper MCS among the multiple MCSs to minimize the average time of transfer delay between the sender and the group members. In the second mechanism, when the RSVP reservation message from group member arrive at the MARS, the MARS which can process the RSVP reservation message select again the MCS with using the MCS management table. Finally, we recommend the mechanism to keep the QoS of Internet service and to reduce the processing-overhead between MARS and MCS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2397-2402
• /
• 2014

Recently, heterogeneous mobile communication network is attracting plenty of interest to serve explosively increasing mobile data traffic. Although the heterogeneous mobile communication network can enhance spatial reuse ratio by using both conventional macro cells and small cells simultaneously, it causes the unbalance in performance of downlink and uplink. In this paper, we propose a new cell selection scheme for heterogeneous mobile communication network. In the proposed cell selection scheme, mobiles select their home cells by considering both uplink and downlink performance, contrary to conventional schemes. We analyze the performance of the proposed scheme in terms of average cell transmission rate through system level simulations and compare it with those of conventional schemes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.7
• /
• pp.45-51
• /
• 2009

We have presented a routing mechanism that selects a route by considering channel statuses in order to fast transfer delay-sensitive data in WSNs (Wireless Sensor Networks). The existing methods for real-time data transfer select a path whose latency is the shortest or the number of hops is the smallest. An algorithm to select a real-time transfer path based on link error rates according to the characteristic of wireless medium was also suggested. However, the propagation delay and retransmission timeout affected by link error rates are shorter than channel assessment time and backoff time. Therefore, the mechanism proposed in this paper estimated the time spent in using a clear channel and sending out a packet, which is based on channel backoff rates. A source node comes to select a route with the shortest end-to-end delay as a fast transfer path for real-time traffic, and sends data along the path chosen. We found that this proposed mechanism improves the speed of event-to-sink data transfer by performing experiments under different link error and channel backoff rates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.239-250
• /
• 2022

LoRa is a physical layer technology designed to secure highly reliable long-range communication with introducing loco parentis tree network and chirp spreading spectrum. Since since a leaf can send message to more than one parents simultaneously with a single transmission in a region, packet delivery ratio increases logarithmically as the number of gateways increases. The delivery ratio, however, dramatically collapses even under loco parentis tree topology due to the limitations of ALOHA-like primitive MAC, . The proposed method is intended to exploit SDMA approach to reuse frequency in an area. With the view, TxPower of each sender for each message in a concurrent transmission is elaborately controlled to survive the collision at different gateway. Thus, the gain from the capture effect improves the capacity of resource-hungry Low Power and Wide Area Networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.194-198
• /
• 2021

LoRa is a physical layer technology that is designed to provide a reliable long-range communication with introducing CSS and with introducing a loco parentis tree network. Since a leaf can utilize multiple parents at the same time with a single transmission, PDR increases logarithmically as the number of gateways increases. Because of the ALOHA-like MAC of LoRa, however, the PDR degrades even under the loco parentis tree topology similarly to the single-gateway environment. Our proposed method is aimed to achieve SDMA approach to reuse the same frequency in different areas. For that purpose, it elaborately controls each TxPower of the senders for each message in concurrent transmission to survive the collision at each different gateway. The gain from this so-called capture effect increases the capacity of resource-hungry LPWAN. Compared to a typical collision-free controlled-access scheme, our method outperforms by 10-35% from the perspective of the total count of the consumed time slots. Also, due to the power control mechanism in our method, the energy consumption reduced by 20-40%.

• Journal of Broadcast Engineering
• /
• v.23 no.5
• /
• pp.682-692
• /
• 2018

In this paper, we propose an ARQ packet error control scheme using multiple threads in delivering massive capacity of multimedia based on MMT(MPEG Media Transport) protocol. On the sending side, each frame that constitutes an image is packetized into MMT packets based on MMT protocol. The header of the packet stores the sequence number of the frames contained in the packet and the time of presentation information. The payload of the packet stores the direct information that comprises the frame. The generated MMT packet is transmitted to the IP network. The receiving side checks if any error has occurred in the received packet. For any identified error, it controls the error through ARQ error control scheme and reconfigure the frame according to the information stored in the header of the received packet. At this point, a multi-threading based transport design is constructed so that each thread takes over a single frame, which increases the transmission efficiency of massive capacity multimedia. The efficiency of the multi-threading transport method is verified by solving the problems that might arise when using a single-thread approach if packets with errors are retransmitted.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.466-474
• /
• 2007

Asymmetric networks that the downlink bandwidth is larger than the uplink bandwidth may cause the degradation of the TCP performance due to the uplink congestion. In order to solve this problem, this paper designs and implements the Dynamic Segment Size Control mechanism which offers a suitable segment size for current networks. The proposed mechanism does not require any changes in customer premises but suppress the number of ACKs using segment reassembly technique to avoid the uplink congestion. The gateway which adapted the Dynamic Segment Size Control mechanism, detects the uplink congestion condition and dynamically measures the bandwidth asymmetric ratio and the packet loss ratio. The gateway reassembles some of segments received from the server into a large segment and transmits it to the client. This reduces the number of corresponding ACKs. In this mechanism, the SACK option is used when occurs the bit error during the transmission. Based on the simulation in the GEO satellite network environment, we analyzed the performance of the Dynamic Segment Size Control mechanism.