• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.259-260
• /
• 2011

대기압 플라즈마는 멸균과 살균, 지혈, 피부재생, 치아 미백 등 여러 의학 분야를 대상으로 그 효과를 나타내고 있으며, 플라즈마 장비를 만들어 내기 위해 부피가 큰 진공 장비가 필요하지 않다는 점에서 대기압 플라즈마는 그 활용과 효과에 있어 큰 기대를 받고 있다. 대기압에서 플라즈마는 다양한 주파수를 이용하여 만들어져 왔으며, 본 연구실에서 연구하고 있는 수백 MHz-수 GHz 대역의 파워를 사용하는 플라즈마의 경우 대기압 플라즈마를 의학 분야에 사용할 때 만족해야 할 조건들에 만족하는 특성을 보여준다. 기존의 고주파를 사용하는 장비의 경우 추가적인 Matching 장비로 인해 플라즈마를 만들기 위해 큰 장비와 높은 파워가 필요한 단점이 있었다. 하지만 이 마이크로웨이브 장비는 전송선 이론을 기반으로 장비 자체가 구조적인 Matching이 이루어 지도록 설계되었다(그림 1). 즉, 추가적인 Matching 장비의 필요 없이 외부에서 파워를 주는 것만으로 플라즈마를 발생 시킬 수 있으며, 50% 이상의 파워 효율을 보여준다. 또한 그 크기도 손에 쥐고 사용할 수 있을 볼펜 정도의 크기이며, 3W의 정도의 저 전력으로 플라즈마를 발생 시켰다. 높은 에너지를 가지는 전자들은 공급되는 기체뿐만 아니라, 주변 공기와의 반응하여 여러 응용분야에 적합한 활성 종을 다량 만들어내게 된다. 본 연구실의 강점인 플라즈마 시뮬레이션으로 얻은 결과에서 주파수가 올라 갈수록 높은 에너지를 가지는 전자들이 많아지는 것을 보여준다. 그리고 발생시킨 플라즈마의 광학 특성에서도 생의학 분야에 적합한 많은 활성 종들이 발생 되는 것을 확인하였다. 일반적으로 의학 분야에 사용되는 플라즈마의 경우 플라즈마에서 발생하는 열에 의한 피해를 최소화 하는 것이 중요하다. 마이크로웨이브 플라즈마의 경우, 그 플라즈마의 온도가 50$50^{\circ}$C 미만으로 의학 분야에 사용하기 적합하다. 또한 구동 주파수가 올라갈수록 플라즈마를 유지하는데 필요한 전압이 상대적으로 낮아지게 되는데, 이는 전기적 쇼크 등 플라즈마 의용에서 발생하는 안전성 문제에 있어서도 마이크로 웨이브 장비가 좋은 점이다. 본 플라즈마 장비를 구동하기 위한 손바닥 크기 정도의 소형의 전용 파워 장치를 개발함으로써 저전력 소형 플라즈마 장치를 개발하는 것을 목표로 하고 있다. 마이크로 웨이브 장비는 여러 가지 분야에서 그 효과를 검증 받았다. 혈액 응고 실험에서 30초 정도의 짧은 처리만으로도 자연 응고에 비해 탁월한 지혈 효과를 보여줬다 (그림 2). 충치를 발생시키는 대표적인 구강균인 S.mutans의 살균 실험에서 Ti02와의 복합적인 처리를 통해 30초 미만의 처리로 처리하지 않은 것에 비해 10-6 만큼의 줄어드는 살균 효과를 보여줬다. 뿐만 아니라 치아의 미백에 있어서도 탁월한 효과를 나타냈다. 현재 본연구실에서는 마이크로 웨이브 장비의 기본적인 구조를 응용하여, 좀더 넓은 영역을 처리할 수 있는 대면적 마이크로 웨이브 장비를 위한 연구를 수행 중이다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.427-435
• /
• 1984

Alfalfa field was established to investigate seasonal changes of nodule activity and contents of carbohydrates, and nitrogen, and also to examine their relationships in alfalfa (Medicago sativa L.). Periodical sampling of alfalfa in cutting and uncutting plots was collected to measure growth of plants, development and activity of nodule, and content of carbohydrates and nitrogen in the third year following year of establishment. Nodule activity of alfalfa root appeared to early April, increased to a maximum in beginning of June (flowering stage), and then decreased and generally remained low from late-July to mid-August, and again increased from early September, and then decreased and generally remained low for the rest of growing season. After flowering, nodule weight tended to decrease slowly throughout the growing season. Until flowering stage, increase of dry weight was closely related with that of nodule activity. But after flowering the curve pattern of dry weight did not fit to that of nodule activity due to decrease of supply of assimilate to nodule, drought, and high temperature. Total nonstructural carbohydrates in roots were closely correlated with nodule weight and nodule activity. While, nitrogen contents in leaves were closely correlated with nodule weight and nodule activity. Also cutting on July prevented unnessesary losses of respiration during summer to provide rapid recovery of nodule activity.

• The Journal of Engineering Geology
• /
• v.22 no.2
• /
• pp.233-241
• /
• 2012

The objectives of this study were to test geothermal conductivity (k), water velocity, water quantity, and pipe pressure from a ground heat exchanger in the field, and then to analyze these data in relation to the effectiveness and economical efficiency for application of geothermal energy. After installation of the apparatus required for field tests, geothermal conductivity values were obtained from three different cases (second, third, and fourth). The k values of the second case (506 m depth) and third case (151 m depth) are approximately 2.9 and 2.8, respectively. The k value of the fourth case (506 m depth, double pipe) is 2.5, which is similar to the second and third cases. This result indicates that hole depth is a critical factor for geothermal applications. Analysis of the field data (k, water velocity, water quantity, and pipe pressure) reveals that a single geothermal system at 506 m depth is more economically efficient than three geothermal systems at depths intervals of 151 m. Although it is more expensive to install a geothermal system at 506 m depth than at 151 m depth, test results showed that the geothermal system of the fourth case (506 m, double pipe) is more economically efficient than the system at 151 m depth. Considering the optional cost of maintenance, which is a non-operational expense, the geothermal system of the fourth case is economically efficient. Large cities and areas with high land prices should make greater use of geothermal energy.

• Journal of Internet Computing and Services
• /
• v.18 no.5
• /
• pp.17-22
• /
• 2017

In a MPC coding using excitation source of voiced and unvoiced, it would be a distortion of speech waveform. This is caused by normalization of synthesis speech waveform of voiced in the process of restoration the multi-pulses of representation section. This paper present PCFBD-MPC( Position Compensation Frequency Band Division-Multi Pulse Coding ) used V/UV/S( Voiced / Unvoiced / Silence ) switching, position compensation in a multi-pulses each pitch interval and Unvoiced approximate-synthesis by using specific frequency in order to reduce distortion of synthesis waveform. Also, I was implemented that the PCFBD-MPC( Position Compensation Frequency Band Division-Multi Pulse Coding ) system and evaluate the SNRseg of PCFBD-MPC in coding condition of 8kbps. As a result, SNRseg of PCFBD-MPC was 13.4dB for female voice and 13.8dB for male voice respectively. In the future, I will study the evaluation of the sound quality of 8kbps speech coding method that simultaneously compensation the amplitude and position of multi-pulse source. These methods are expected to be applied to a method of speech coding using sound source in a low bit rate such as a cellular phone or a smart phone.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.618-624
• /
• 2007

thermochemical methane reforming consisting of two steps on Cu/Fe/Zr mixed oxide media was carried out using a fixed bed infrared reactor. In the first step, the metal oxide was reduced with methane to produce CO, $H_2$ and the reduced metal oxide in the temperature of 1173 K. In the second step, the reduced metal oxide was re-oxidized with steam to produce $H_2$ and the metal oxide in the temperature of 973 K. The reaction characteristics on the added amounts of Cu in Cu/Fe/Zr mixed oxide media and the cyclic tests were evaluated. With the increase of the added amount of Cu in Cu/Fe/Zr mixed oxide media, the conversion of $CH_4$, the selectivity of $CO_2$ and the $H_2/CO$ molar ratio were increased, while the selectivity of CO was decreased in the first step. On the other hand, the evolved amount of $H_2$ was decreased with increasing the added amount of Cu in the second step. The $Cu_xFe_{3-x}O_4/ZrO_2$ medium added with Cu of x = 0.7 showed good regeneration properties in the 10th cyclic tests indicating that the medium had high durability. In addition, the gasification of the deposited carbon in the water splitting step was promoted with the addition of Cu in the media.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.205-216
• /
• 2010

In this paper, a method of MPEG-2 Transport Stream (TS) multiplexing for Ultra HDTV (UHDTV) and its design and implementation as a SW tool is described. In practice, UHD video may be divided into several HD videos and each video is encoded in parallel. Therefore, it is necessary to synchronize and multiplex multiple bitstreams encoding each HD video for transmitting and storing UHD video. In this paper, it is assumed that 4 HD videos partitioning a UHD spatially are encoded as H.264/AVC and two 5.0 channel audios are encoded by AC-3. Therefore, 4 H.264/AVC elementary streams (ESs) and 2 AC-3 ESs is mainly considered in the TS multiplexing of UHD. For the carriage of H.264/AVC and AC-3 over MPEG-2 TS, PES packetization and TS multiplexing are designed and implemented based on the extended specification of the MPEG-2 Systems and ATSC (Digital audio compressed standard), respectively. The implemented UHD TS multiplexing tool emulates real time HW operation in the time unit corresponding to the duration of one TS packet transmission in a given TS rate. In particular, in order to satisfy the timing model, the buffers defined in the TS System Target Decoder (T-STD) are monitored and their statuses are considered in the scheduling of TS multiplexing. For UHD multiplexing, two kinds of multiplexing structures, which are UHD re-multiplexing and UHD program multiplexing, are implemented and their strength and weakness are investigated. The developed UHD TS multiplexing tool is tested and verified in terms of the syntax and semantics conformance and functionalities by using a commercial analyzer and real-time presentation tools.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.4
• /
• pp.281-287
• /
• 1994

This experiment was canied out to determine the effects of 3cn1, 6cm, and lOcm of cutting height at harvest on the grass growth, dry matter(DM) yield, and weeds development in reed canarygrass(Phu1uris umndinacea L.) pasttire. The cultivars of reed canarygrass used in this study were Palaton. Veuture and Frontier(contro1). and the grass was harvested four times at soiling stage in 1992. The plant height at first harvest was 84, 96 and 94cm in Palaton, Venture and Frontier, respectively. The average regrowth height was same as 59cm in three cultivars. However, the regrowth height by cutting height was 61 -65cm in 6 and IOcm, and 51 -53cm in 3cm of low cutting height. Annual DM yield was not different in three cultivars of Palaton(l2.58lkg), Venture(l2,752kg), and Frontier (12,243kgIha). The yield at first harvmt wa5 significantly high in 3cm of height, however, the forage yields at second, third and fourth harvest were greatly high in 6cm of stubble height(P<0.05). Total yields by 3, 6 and lOcm of cutting height were 12.306. 14,094 and 11,342kg in Palaton, 12,794, 14,155 and 11,307kg in Venture, and 12,258, 12,940, and 11.535kglhg in Frontier, respectively. The highest yield was achieved in 6cm of stubble heigth(P<0.05). Daily DM production during grass regrowth was not affected by cultivars, and the best regrowth was observed by 6cm of cutting height. Development of weeds was high in 3cm of low stubble height, regradless of cultivars. The contents of crude protein, neutral detergent fiber, acid detergent fiber, and hemicellulose were not affected by cultivar and cutting height. In conclusion, it is suggested that the 6cm of cutting height is the most effective for grass regrowth, forage production, and weed control in reed canarygrass pasture. regradless of cultivm of Palaton, Venture and Frontier.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.3 no.2
• /
• pp.58-66
• /
• 1983

This experiment was carried out to investigate the effects of the nitrogen rates and cutting heights on the appearance dry weight and death of new bud (branch and tiller) of sorghum-sudangrass hybrid (Sorghum bicolor (L.) Moench). The cultivar used in the present study was Pioneer 988. The experiment was arranged as a split plot design and undertaken in the Experimental Livestock Farm of Agriculture Coll., Seoul Nat'l Univ. in Suweon, 1981 and 1982. The results obtained are summarized as follows: 1. The appearance and death of branch and tiller were not influenced with high nitrogen fertilization. 2. The frequency of the branching was decreased as the low stubble height, and the rate of the tillering was decreased in the high stubble height. 3. The yield of forage mostly depended on the tiller regardless of cutting height, and minor portion of the yield was resulted from the branch. 4. The low cutting height resulted in the increased number of dead bud (p<0.05).

• Journal of Life Science
• /
• v.21 no.11
• /
• pp.1558-1564
• /
• 2011

Cytochrome P450 2J2 (CYP2J2) plays important roles in the metabolism of endogenous metabolites such as arachidonic acid as well as therapeutic drugs. CYP2J2 is overexpressed in human cancer tissues and cancer cell lines, as well as in epoxyeicosatrienoic acids (EETs) and CYP2J2-mediated metabolites, and prevent apoptosis of cancer cells. This study aimed to screen marketed drugs for inhibitory potential on CYP2J2 isoforms using human liver microsomes. The initial screen isolated 4 compounds, from 120 marketed drugs, that inhibited the CYP2J2-mediated astemizole O-demethylation more than 50% in the following the order: haloperidol (75%) > terfenadine (56%) > aripiprazole (55%) > miconazole (52%). Miconazole strongly inhibited CYP2J2-mediated ebastine hydroxylation ($IC_{50}$=11.2 ${\mu}M$) and terfenadine hydroxylation ($IC_{50}$=2.2 ${\mu}M$), and terfenadine also inhibited CYP2J2-mediated ebastine hydroxylation ($IC_{50}$=13.6 ${\mu}M$) in a dose dependent manner. The present data suggest that these drugs are potential candidates for further evaluation for their anti-cancer activities.

• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.165-177
• /
• 1997

The purpose of this study was to perform on the biological activity of Magnolia and Zizyphi fructus extract mixtures on the wound healing of defected rat calvaria. For the determination of the mixture ratio of two extracts for oral administration, preliminary experiments were performed with the mixture combination of 2000 and $3000{\mu}g/ml$ of Magnolia extract, and also 20, 30, 200, 300, 2000 and $3000{\mu}g/ml$ of Zizyphi fructus extract, respectively and divided into 6 groups. The combination of extracts mixture were tested on the enhancing effect of cellular activity. The effect of the extracts mixture on the cellular activity was evaluated using MTT method and measured on the results with optical density by ELISA reader. The ability to tissue regeneration of the extracts mixture was performed by measuring new bone and new connective tissue regeneration on the 5mm defected rat calvaria for 1, 2 and 3 weeks after oral administration of 2 different dosages groups : 10:1(0.1g/kg) and 10:1(0.5g/kg). It was employed the same dosages of unsaponifiable fraction of Zea Mays L as positive controls. Each group of rat was sacrificed and en bloc section for histological examination. The effect on the cellular activity of each mixture ratio showed significantly higher in $2000{\mu}g/ml$ of Magnolia extract and $200{\mu}g/ml$ of Zizyphi fructus extract group to compare with other groups. These preliminary results showed that appropriate mixture ratio of two extracts was 10:1 of Magnolia and Zizyphi fructus extract. Histological examination on the activity of tissue regeneration of each group showed that 2weeks and 3weeks specimens of 0.5g/kg of 10:1 extract mixture of Magnolia and Ziziphi fructus administrated rat calvaria revealed significantly more osteoid and new bone formation of defected calvaria with unification of defected area than the specimens of any other negative and positive controls. Even though the specimen administrated the same dosages of unsaponifiable fraction of Zea Mays L, positive controls, showed the trend that they promote significantly the repair of calvarial defect, their bone reparative activities were less inductive than the same dosages of Magnolia and Ziziphi fructus extract mixture. These results implicated that the mixture of Magnolia and Zizyphi fructus extracts should be highly effective on the wound healing of bony defected site and might have potential possibilities as an useful drug to promote periodontal tissue regeneration.