• Journal of Preventive Medicine and Public Health
• /
• v.29 no.3 s.54
• /
• pp.693-700
• /
• 1996

The purpose of this study was to determine whether workers at a factory next to a lead recycling factory in Pusan, were affected by lead contamination. The mean air lead concentration of lead recycling factory was $0.21mg/m^3(TWA=0.05mg/m^3)$. Thirty-nine male workers of Factory A, Cr. plating factory next to the lead recycling factory were exposed group and a comparison group, 62 male workers of Factory B were selected from another Cr. plating factory about 8.5km away from lead recycling factory. Air lead concentration of each workplace was checked for 4 times from August f to August 20 in 1995 by low volume air sampler. Each subject was interviewed about age, life-style, smoking, work history, and residence etc, and venous blood was drawn for lead measurement by graphite furnace atomic absorption spectrometry. We have observed that air lead concentration and blood lead concentration of Factory A was higher than Factory $B(2.6{\pm}1.6\;Vs.\;1.2{\pm}0.2{\mu}g/m^3,\;14.9{\pm}1.6\;Vs.\;12.2{\pm}1.6{\mu}g/dl)$. We believe that other environmental lead sources such as transportation and residence did not affect air lead and blood lead concentration differences of both factory. We concluded that high air lead and blood lead concentration of Factory A were caused by lead contamination generated by the neighboring lead recycling factory.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.155-166
• /
• 2010

Studies on the production of cell-wall bound innerpolysaccharides (IPS) (soluble ${\beta}$-D-glucan) have been performed by use of suspended myelial cultures of Inonotus obliquus. This product has promising potentials as an effective antidiabetic as well as an immunostimulating agents. As a first step to enhanced production of IPS, Intensive strain improvement programs were carried out by obtaining a large amounts of protoplasts for the isolation of single cell colonies. Rapid and large screening of high-yielding producers was possible because about fivefold higher amount of protoplasts ($2.3{\times}10^6$ protoplasts/mL) could be recovered with relatively high regeneration rates of $10^{-2}{\sim}10^{-3}$ by applying a modified filtration method, as compared to the previously used trapping method. A basic protocol necessary for UV-mutation of the protoplasts was also developed, resulting in several overproducing variants with good fermentation properties. Since the amount of IPS extracted from the mycelial cell walls of I. obliquus turned out to be almost constant per g DCW, increase in cell mass was considered the most important factor for the enhancement in IPS production. Therefore, attempts were made to screen mutant cells showing rapid mycelial growth rate in the final suspended cultures. Notably, the mutant strains showing an active cellgrowth in the preceding solid growth cultures were observed to produce higher amount of IPS in the suspended fermentations as well. A striking mutant, OBLQ756-15-5 strain, obtained from the survivors of a harsh UV-treated condition (97% death rate) was found to stably produce as high cell mass as 22 g DCW/L in the final fermentations. Currently, this strain is being tested for development of a scaled-up fermentation process for mass production of IPS.

• The Korean Journal of Pharmacology
• /
• v.27 no.1
• /
• pp.13-20
• /
• 1991

There are some rather conflicting reports correlating ECS-induced changes of brain acetylcholine, and recently, Zawia and Bondy(1990) proposed the biological role of polyamine system in the long-term adaptive responses of brain to electrical stimulation. This study was undertaken to evaluate the effects of a single or repeated ECS(10mA, 100cps, 1sec; 5 ECS spread out over 9 days) on the brain acetylcholine(ACh) and polyamine contents of male mice. The ACh contents of temporal cortex(TCx) and decorticated cerebrum(dc-CB) were markedly increased by 79.9% and 49.4%, respectively, 10 and 30 min after ECS, and the increases were significantly attenuated with repeated 5 ECS, particularly in dc-CB. The putrescine concentrations of both TCx and dc-CB were little different and not affected by 1 ECS or 5 ECS. But the spermidine(Sd) concentration was higher in dc-CB and spermine(Sm) higher in TCx. While they were moderately decreased after 1 ECS, and their decreases were accentuated after 5 ECS, particularly in dc-CB.Sm(30mg/kg, i.p. inject. 30min before ECS) did not affect the ECS-induced increase of ACh content. Thease results suggest that both of brain ACh and polyamine may be implicated with the long-term adaptive responses to electrical stimulation

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.4
• /
• pp.341-346
• /
• 2004

To determine lethal temperature of birdsfoot trefoil(BFT) and italian ryegrass(IRG) at heat-stressed conditions, seedlings grown in a small pots fur 4 weeks were subjected to different temperature regimes of heat treatment. No apparent damage was observed BFT and IRG were treated at 45, 50 or $60^{\circ}C$ for 1 h. And also heat treatments at 60, 65 and $70^{\circ}C$ for 1 h, both of them were withered and showed damage symptom on their leaves but it was not lethal conditions for the whole plants. By contrast, most of plants were prominently withered within one day after heat treatment at $80^{\circ}C/60min$. When BFT was exposed to $80^{\circ}C/60$ min, they were died within 6 days but there was found that new shoots were regenerated from the plants that had been treated at $80^{\circ}C$ within 55 min. IRC was also died within 2 days that exposed to $80^{\circ}C/20$ min but there was found that new shoots were regenerated from the plants that had been treated at $80^{\circ}C$ within 15 min. These results indicate that heat killing temperatures of BFT and IRG plants are $80^{\circ}C/60$ min an $80^{\circ}C/20$ min respectively. Simple viability assay system established in this study will be useful for selection and characterization of heat-tolerant transgenic BFT and IRG plants.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.875-884
• /
• 2003

Operational parameters for struvite crystallization, as a process to recover nitrogen and phosphorus resources from animal wastewater, were studied in this research. Crystallization distinctive of NH$_4$-N and PO$_4$$^{3-}$ in accordance to chemical sources, influent pH, aeration and stirring was examined using 2L of working volume of struvite reactor. Also, to find an effective treatment process combining with electrolysis method, removal characteristics of NH$_4$-N and PO$_4$$^{3-}$ in 6 different processes was tested. As chemical sources for the derivation of struvite formation, MgSO$_4$ and MgCl$_2$ were superior to CaCO$_3$ and CaCl$_2$. From experiment which was conducted to know the effects of aeration and stirring on struvite formation, it was revealed that aeration stimulated the crystallization reaction by inducing faster pH increase. While 90% of P removal was achieved within 1 hour under aeration, 14 hours was consumed under stirring condition. Struvite formation under aeration was affected by influent pH. No crystallization was observed at pH 5 level, but active crystallization reaction was induced over pH 6.0. 95% of P removal by struvite formation at pH 6, 7 and 9 was achieved within 3h, 2h and 10 min., respectively. However, over pH 10, operational problem due to excessive foam formation occurred, and blunting of crystallization reaction was observed at pH 11. When consider the pH range of animal wastewater, pH 7 to 9, efficient struvite formation could be achieved by simple aeration, without any chemical usage for pH adjustment. Among tested processes, the treatment process which electrolyzing the supernatant from struvite reactor, providing air to both reactors, showed best pollutant removal efficiencies. In this combined process, the removal efficiencies of NH$_4$-N and PO$_4$$^{3-}$ was 86% and 98%, respectively, and 92.4% of color removal was obtained.

• The Korean Journal of Mycology
• /
• v.35 no.2
• /
• pp.81-84
• /
• 2007

In some cases, the problem with the mycelium of Tricholoma giganteum is delayed mycelial growth or non-regeneration. Therefore, this study was conducted to understand the mycelial storage condition of T. giganteum and to investigate the regeneration ratio of mycelial growth. T. giganteum obtained from KACC in RDA was evaluated for its simple preservation at $10^{\circ}C$ and subcultured on different media. Mycelium of T. giganteum was cultured on the PBA (potato bamboo extract medium) for seven days at $30^{\circ}C$. Using simple preservation method, the mycelium of T. giganteum (MKACC 50852) and Pleurotus ostreatus (Chunchu No. 2) were stored on six different media in two kinds of storage vessels (tube and vial) for a period of 1-12 months at $4^{\circ}C,\;15^{\circ}C$, and $25^{\circ}C$ storage temperatures. At $4^{\circ}C$ storage condition, mycelial regeneration was failed in all agar media, but was successful in the sawdust medium for 3 months. At $15^{\circ}C$ storage, mycelial activity was maintained up to six months. On the other hand, P. ostreatus produced well-regenerated mycelia both at $4^{\circ}C$ and $15^{\circ}C$ storage up to 12 months. In conclusion, it is estimated that the mycelia storage condition of T. giganteum must be done at $15^{\circ}C$ and subcultured within six months.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.105-116
• /
• 2017

Murals in villages revitalize communities and spaces, and are economically efficient. Central and local governments are therefore actively undertaking Mural Village Projects but there are some issues and concerns about the projects for the provision of uniformed landscapes for the regions that are the result of a short-term completion of projects, and instead of cohesion, cause destruction of place identities. In addition, the problem of sustainable landscape management that is the result of low community involvement can be pointed out because the murals are products of government-led projects. The study covered the context of landscape and space change processes from a critical perspective, and focused on Ihwa-dong Mural Village, which is considered the first mural village in Korea and has begun to undergo drastic changes due to attention received from media. The purposes of this study are as follows. First, the study provides data about difference of place identity perception and landscape preference between residents and tourists in Ihwa-dong Mural Village. Second, this paper evaluates the current Mural Village Projects and finds alternative directions to improve the projects by using these data. This paper analyzed tourist hot spots in Ihwa-dong Mural Village by using SNS analysis, a field study and focus group interviews. The difference of place identity perception and landscape preference was examined among three groups: residents, new residents who are invited by Mural Village Projects, and tourists. This study showed that many tourists are focused on landscape areas that were not intentionally constructed projects. In addition, the locations of preferred landscapes and stores overlapped. Meanwhile, using qualitative data analysis, it was found that residents perceived the area as being an under-privileged location, while the murals, a non-daily landscape, largely affected place identity perception of new residents and tourists. For landscape preference, tourists preferred outdoor rest areas, while new residents and residents preferred less. Additionally, new residents and tourists preferred an area's night view while residents made no mention of this. Related to the direction of the projects, three groups showed their dependence on the government. This empirical study is significant from a participatory design perspective and in analyzing the issues for mural villages' landscapes, which are spreading across the nation and proceeding without criticism in urban regeneration. Implications for urban planners and suggestions for the future projects are given.

• Journal of Veterinary Clinics
• /
• v.27 no.5
• /
• pp.533-539
• /
• 2010

Stem cell-based therapy is under intensive investigation to treat acute renal failure (ARF). The purpose of this study was to evaluate available ARF models, and suggest a model appropriate to therapeutic evaluation of the stem cells in preclinical approach by determining the optimum concentration of nephrotoxic agents and duration of ischemia induction. Three different types of available acute kidney injury (AKI) animal models were analyzed using rats: Cisplatin (saline, 5 and 7.5 mg/kg, IP) or glycerol (saline, 8 and 10 ml/kg, IM)-induced nephrotoxicity as toxic models and ischemia-induced (sham, 35 and 45 minutes) nephropathy as an ischemic model. The relevance and applicability to investigate especially the regenerative ability of stem cells were evaluated regarding morphology, renal function and survival at this time point. In the point of renal function, 10 ml glycerol/kg and 7.5 mg cisplatin/kg model in toxic models and 45 min model in ischemia models showed significant decrease for the longer observation time compared to 8 ml glycerol/kg, 5 mg cisplatin/kg and the 35 min ischemia models, respectively. All groups were observed no mortality except 45 min-ischemia model with 50% survival. Histological significant alterations including cast formation in the tubular lumen, tubular necrosis and apoptosis were revealed on the second day in either ischemiaor glycerol-induced models, and on day 5 in cisplatin-induced models. The results indicate that ischemia 35 min-, cisplatin 7.5 mg/kg- and glycerol 10 ml/kg-induced AKI would be ideal animal models to monitor a outcome parameter related to the therapeutic effects on renal function with noninvasive techniques in the same animal at multiple time points. Our findings also suggest that the best time points for the functional or histological interpretation of renal will be on day 2 in both glycerol- and ischemia-induced AKI models and on day 5 in cisplatin-induced AKI.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.275-284
• /
• 2012

This study was carried out to determine the harvest management during autumn on the forage production, quality and regrowth of following year of Phragmites communis as native grass. Field experiments were conducted in Ansan and in Cheonan from 2010 to 2011. Forages were cut at 3 cm, 15 cm and 25 cm in height as compared to control (no harvest) in Ansan plots, and forages grown in Cheonan plots were cut at 10 cm and 20 cm in height with control (no harvest). The forages were harvested one time on Oct 7, 2011 in Ansan, and were harvested twice on July 7 and on October 7 in Cheonan. In Ansan, dry matter (DM) yield of control plot the following year were higher than those from harvested plots. In vitro digestible DM (IVDDM) yields, however, were the same: 1,236 kg/ha from control, 1,234 kg from 15 cm cut and 1,241 kg from 25 cm cut plots, except that lower IVDDM yield from 3 cm cut plot than these were observed. Forage quality of control plot was poorer than those of harvested ones. In vitro DM digestibility (IVDMD) and relative feed value (RFV) of control were 39.98% and 65.3, respectively as compared to harvested plots (42.36~46.40% IVDMD and 67.8~72.5 RFV). Yield and quality from Cheonan plots were similar to those from Ansan plots. Annual yield in DM and in CP from control plot were a little higher than those from harvested plots. However, there were no difference found in IVDDM yield between 20 cm cut (5,354 kg/ha) and control (5,178 kg). But IVDDM of 10 cm cut forages was less (4,531 kg). Forage quality scores were better from 20 cm cut, and 10 cm cut plot than control, in order (p<0.05). The quality grades were the 5th and 6th for forages from harvested plots and control plot, respectively. Regrown Phragmites communis from all Cheonan plots ranked the 4th in forage quality. More than 70% of annual yield was observed from the first grown forages. One time harvest per year was desirable for following regrowth and long time stable production of Phragmites communis. We recommended that Phragmites communis be harvested once for more forage yield with higher quality, and that optimum cutting height is 15~20 cm.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.317-323
• /
• 2009

In this study the nanofiltration (NF) membrane treatment of a nitric acid waste solutions containing $Pb^{+2}$ heavy metal ion discharging from the etching processes of an electronics and semiconductors industry has been studied for the purpose of recycling of nitric acid etching solutions. Three kinds of NF membranes (General Electric Co. Duraslick NF-4040 membrane, Dow Co. Filmtec LP-4040 membrane and Koch Co. SelRO MPS-34 4040 membrane) were tested for their separation efficiency (total rejection) of $Pb^{+2}$ ion and membrane stability in nitric acid solution. NF experiments were carried out with a dead-end membrane filtration laboratory system. The membrane permeate flux was increased with the increasing storage time in nitric acid solution and lowering pH of acid solution because of the enhancing of NF membrane damage by nitric acid. The membrane stability in nitric acid solution was more superior in the order of Filmtec LP-4040 < Duraslick NF-4040 < SelRO MPS-34 4040 membrane. The total rejection of Pb+2 ion was decreased with the increasing storage time in nitric acid solution and lowering the pH of acid solution. The total rejection of $Pb^{+2}$ ion after 4 months NF treatment was decreased from 95% initial value to 20% in the case of Duraslick NF-4040 membrane, from 85% initial value to 65% in the case of SelRO MPS-34 4040 membrane and from 90% initial value to 10% in the case of Filmtec LP-4040 membrane. These results showed that SelRO MPS-34 4040 NF membrane was more suitable for the treatment of an acidic etching waste solutions containing heavy metal ions.