• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.100-104
• /
• 1996

신형경수로의 설계 대안으로서 기존 가압경수로와 가압중수로의 단점들을 극복하고, 장점들을 채택한 새로운 중수감속 경수로의 노심 설계를 제안하였다. 기존 가압중수로의 압력관내에 경수를 냉각제로 순환시키며 중수를 감속재로서 압력관 외부에 배치하였으며, 핵연료로서 농축우라늄을 사용하는 설계 개념은 많은 설계 장점을 갖는다. 본 연구에서는 시스템은 기존 CANDU의 설계를 입증기술로서 가능한 그대로 채택하고, 핵연료와 냉각재에 대해 핵설계를 수행하여 핵적 타당성을 검토하였다. 핵연료다발은 월성 2호기 사양을 그대로 사용하여 37봉 핵연료 다발로 하였으며, 농축도, 봉간간격, 핵연료다발간 간격들을 변형시켜 높은 연소도를 확보하면서 냉각재 온도계수와 감속재 온도계수가 음의 안전성을 갖는 원자로가 설계될 수 있음을 확인하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.92-98
• /
• 2014

Spacer is a construction material for maintaining cover depth and steel installation, however several problems like staining, leakage, and cracking are currently issued due to performance degradation and unsatisfactory dimensional stability of spacer. Plastic composite is widely used for prevention of brittle failure in cement based material, which yields improvement of crack resistance and ductile failure. This study is for development and applicability evaluation of high strength spacer with slag cement for environmental load reduction and plastic composite like polypropylene fiber, nylon fiber, and glass fiber. For this work, unit weight of 4 different plastic fibers are evaluated through preliminary tests. Physical tests including compressive, flexural, and tensile strength and durability tests including absorption, permeability, length change, crack resistance, carbonation, and freezing and thawing are performed. Through various tests, optimum plastic fiber is selected and manufacturing system for high strength spacer with the selected fiber is developed. Dimensional stability of the developed spacer is evaluated through field applicability evaluation.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.19-27
• /
• 2015

Due to the advantages of fast read/write operation and low power consumption, SSD(Solid State Drive) is now widely adopted as storage device of smart phone, laptop computer, server, etc. However, the shortcomings of SSD such as limited number of write operations and asymmetric read/write operation lead to the problem of shortened life span of SSD. Therefore, the block replacement policy of SSD used as cache for HDD is very important. The existing solutions for improving the lifespan of SSD including the LARC scheme typically employ the LRU algorithm to manage the SSD blocks, which may increase the miss rate in SSD due to the replacement of frequently used block instead of rarely used block. In this paper we propose a novel block replacement scheme which considers the block reuse interval to effectively handle various data read/write patterns. The proposed scheme replaces the block in SSD based on the recency decided by reuse interval and age along with hit ratio. Computer simulation using workload trace files reveals that the proposed scheme consistently improves the performance and lifespan of SSD by increasing the hit ratio and decreasing the number of write operations compared to the existing schemes including LARC.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.300-309
• /
• 2015

In IEEE 802.11n WLANs(Wireless Local Area Networks), to support high throughput, MAC(Media Access Control) layer adopts A-MSDU(Aggregate-MAC Service Data Unit) and A-MPDU(Aggregate-MAC Protocol Data Unit). Generally, as the A-MPDU uses a selective retransmission capability, A-MPDU provides higher throughput than A-MSDU. However, although A-MPDU uses the selective re-transmission capability, if the size of MPDU within A-MPDU is smaller than the size of minimum MPDU starting spacing, A-MPDU can reduce throughput because of the overhead of retransmission owing to the addition of delimiter, that is a dummy MPDU. Therefore, to overcome the above problem, two-level Aggregation method, where the small MPDU within A-MPDU is replaced by not delimiter but A-MSDU, has been introduced. In the two-level Aggregation method, the existing re-transmission scheme retransmits only A-MPDU, but if the size of retransmission data is smaller than the size of the minimum MPDU starting spacing, the proposed retransmission scheme retransmits the aggregated retransmission data and MSDUs. Therefore, we know that the proposed retransmission scheme have better throughput that the existing retransmission scheme.

• The Hankook-Saengyark Bo
• /
• no.255
• /
• pp.5-5
• /
• 2003

생약자원개발사업 진행 - 황분말대신 '유안' 사용 비용 덜들고 품질 향상 - 삼백초 5cm간격으로 밀식 상품성있는 잎 더욱 늘어나 - 한약재 이용 천연염색 교육 - 둥굴레 신품종 '건강백세' 개발(2005년 농가보급 계획) - 자생식물로 천연농약개발(강원도농업기술원) - 안성 죽산일대 '지황' 주산지로부상 - 자원식물학회 학술발표회

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.750-757
• /
• 2018

The mechanically stabilized earth wall abutment is an earth structure using a mechanically stabilized earth wall and it uses in-extensional steel reinforcements having excellent friction performance. In order to analyze the pullout behavior of in-extensional steel reinforcements usually applied on the mechanically stabilized earth wall abutment, effects of stiffness and particle-size distributions of backfills and also horizontal spacings were considered in this study. As a result of parametric analyses, the highest pulling force acted on the uppermost reinforcement, and the stiffness and the particle-size distributions of the backfill significantly affected the pulling resistance of the reinforced soils. The internal friction angle of backfills should be at least 25 degrees, the coefficient uniformity factor should be at least 4, and the horizontal spacing of the uppermost steel reinforcement should be less than 25cm. Therefore, in order to secure the pullout resistance of the reinforced soil, it is necessary a properly spacing of reinforcement and more strict quality control for the backfill.

• Electronics and Telecommunications Trends
• /
• v.6 no.1
• /
• pp.110-119
• /
• 1991

셀룰러 이동 통신 시스템은 한정된 주파수 자원으로 늘어나는 이동통신 수요를 충족시키기 위하여 여러가지 스펙트럼 효율을 높이기 위한 방식이 제시되고 있다. 본 고에서는 스펙트럼 효율을 분석할 수 있는 주파수, 공간 그리고 시간 측면에서 무선회선 간격의 협대역화, 주파수 재사용, 다수 접속방식, 그리고 시간 사용 효율 개선방식을 살펴보았다.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.174-181
• /
• 2002

In this Paper, we proposed the method for the TIT (Theoretical Inter-arrival Time) was suggested in which it saves the cells by using the data buffer in the system rather than by using one separately from the internal controller, and it also releases these cells saved. The method of TIT complements the defect of the accumulation of the delay in the method of RDT which considers the time of the cell that is discharged from the established cell interval controller. And, in order to apply the merit of RDT, the method of TIT sets its standards on the cells arrival time as it was in the method of RAT.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.27-27
• /
• 2009

드라이브 샤프트는 일반적으로 엔진에서 발생된 회전력을 바퀴에 직접 전달하는 동시에 조향기능을 수행하는 자동차 부품이다. 최근에 경량화를 통한 에너지 절감을 위하여 기존 스틸소재를 알루미늄으로 대체하는 방안에 대한 연구가 집중되고 있다. 그러나 알루미늄 단일소재로 드라이브 샤프트를 제조하는 것은 비경제적이며 또한 기 개발된 자동차 부품들과의 연결을 고려하여 알루미늄 튜브와 스틸 요크의 이종금속 접합기술이 요구된다. 전자기 펄스용접은 전자기력을 이용하여 용접대상물을 고속으로 충돌시켜 용접하는 기술로서 열 발생이 적어 재료의 특성차로 인한 결함 및 변형이 발생하지 않아, 이종금속간 고품질 용접이 가능하며, 전자기 펄스 용접부의 품질과 밀접한 관계를 갖는 공정변수 경우 모재와 접합재의 재질 따라 적정 공정변수 범위가 변화되므로 공정에 따른 데이터의 축적은 대단히 중요하다. 전자기 펄스 용접을 이용한 이종금속 접합시 접합부 품질에 영향을 미치는 공정변수는 충전전압, 모재와 접합재 사이의 간격 및 접합재의 직경과 두께의 비(D/T비)로서 보고되었으며, Al/Steel 이종 금속 접합시 이들 공정변수가 접합부에 미치는 영향 및 최적의 공정변수 도출을 위한 연구는 시도되지 않았다. 따라서 본 연구는 전자기 펄스 용접기술을 이용한 Al/Steel 이종금속 접합 실험을 통하여 전자기 펄스용접의 적정성과 최적의 충전전압, 모재와 접합재 사이의 간격, D/T비를 도출하고자 한다. 전자기 펄스 용접 장치는 한국생산기술연구원과 웰메이트(주)에서 공동으로 개발한 $120{\mu}F$의 캐패시터 6개로 구성된 'W-MPW36'을 사용하였으며 이 장치의 최대충전전압과 최대접합용량은 각각 10kV, 36kJ이다. 접합재는 전기 전도율의 높은 Al 1070 파이프를 사용하였으며 모재는 기존 스틸 요크재인 SM45C 환봉을 사용하였다. 기보고된 연구를 통하여 코일과 접합재 사이의 간격이 좁을수록 높은 전자기력이 접합재에 작용하는 것을 확인하였으나 코일내 접합재와 모재 삽입 편의를 위하여 1mm로 설정하였다. 접합부의 품질 평가를 위하여 수압시험을 실시하였으며, 시험 후 접합부 단면을 주사전자현미경(SEM)을 이용하여 관찰하였다.

• Journal of the Korean Institute of Gas
• /
• v.21 no.3
• /
• pp.53-60
• /
• 2017

Various researches have been conducted for the reduction of NOx at the combustion furnace and exhaust gas recirculation method is commonly used technology for NOx reduction. The present research adopted coanda nozzles at the outside pipes of furnace to entrain the exhaust gas for the exhaust gas recirculation and the mixed gas was ejected to the tangential direction to cause the swirl flow in the furnace. The combustion flow characteristics in the exhaust gas recirculation burner with coanda nozzle has been elucidated by analyzing the swirl flow streamlines, temepraure and reaction rate distribution in the furnace. The exhaust gas entrained flow rate has been investigated by changing the excess air factor and coanda nozzle gap and the exhaust gas entrained flow rate increased with the increase of excess air factor and it decreased with the increase of coanda nozzle gap. The mean temperature at the exit plane of exhaust gas decreased with the excess air factor and it was little affected by the increase of coanda nozzle gap. The NOx mass fraction at the exhaust gas exit plane remarkably decreased with the excess air factor and it was also little affected by the increase of coanda nozzle gap.