• Title/Summary/Keyword: 재사용 가능

Search Result 2,783, Processing Time 0.031 seconds

Economic and Environmental Impact of the Bioplastics Industry: A Recursive Dynamic CGE Approach (바이오플라스틱산업의 경제적·환경적 파급효과: 축차동태 연산가능일반균형모형 적용)

  • Son, Wonik;Hong, Jong Ho
    • Environmental and Resource Economics Review
    • /
    • v.30 no.2
    • /
    • pp.269-297
    • /
    • 2021
  • Bioplastics are attracting attention as a substitute for conventional petroleum-based plastics because they are carbon neutral and can be biodegradable. This study estimated economic and environmental impact of regulating the petroleum-based plastics industry and fostering the bioplastics industry using a Recursive Dynamic CGE Model of the Korean Economy. Results show that the regulation of the conventional plastics industry exhibits a positive environmental impact by reducing greenhouse gases and plastic waste and a negative economic impact with a decrease in GDP. Meanwhile, fostering the bioplastics industry with regulation on conventional plastics industry has similar levels of greenhouse gas and waste reduction effects when there is only regulation on the conventional plastics industry. It is also shown that expanding the production of bioplastics industry offsets existing economic losses as a form of increased GDP. If petroleum-based plastics are replaced through the expansion of bioplastics production, it can contribute to the decoupling of greenhouse gas emissions and plastic waste from economic growth.

이동형 의료영상 장치를 위한 JPEG2000 영상 뷰어 개발

  • 김새롬;김희중;정해조;강원석;이재훈;이상호;신성범;유선국
    • Proceedings of the Korean Society of Medical Physics Conference
    • /
    • 2003.09a
    • /
    • pp.81-81
    • /
    • 2003
  • 목적 : 현재, 많은 병원이 방사선과 의료영상정보를 기존의 필름형태로 판독하고, 진료하는 방식에서 PACS 를 도입하여 디지털 형태로 영상을 전송, 저장, 검색, 판독하는 환경으로 변화하고 있다. 한편, PACS 가 가지는 가장 큰 제한점은 휴대성의 결핍이다. 본 연구는 이동형 장치가 가지는 호스트의 이동성 및 휴대성의 장점들을 살리면서, 무선 채널 용량의 한계, 무선 링크 사용이라는 제약점들을 감안하여 의료영상을 JPEG2000 영상압축 방식으로 부호화한 후 무선 환경을 고려한 전송 패킷의 크기를 결정하고자 하였으며, 무선 통신 중 발생되는 패킷 손실에 대응하기 위한 자동 오류 수정 기능도 함께 구현하고자하였다. 방법 : Window 2000 운영체계에서 의료영상을 로드하고, 데이터베이스화하며, 저장하고, 다른 네트워크와 접속, 제어가 가능한 PC급 서버를 구축하였다. 영상데이터는 무선망을 통해 전송하기 때문에 가장 높은 압축비율을 지원하면서 에너지 밀도가 높은 JPEG2000 알고리즘을 사용하여 영상을 압축하였다. 또한, 무선망 사용으로 인한 패킷 손실에 대비하여, 영상을 JPEG2000 방식으로 부호화한 후 각 블록단위로 전송하였다. 결과 : PDA에서 JPEG2000 영상을 복호화 하는데 걸리는 시간은 256$\times$256 크기의 MR 뇌영상의 경우 바로 확인할 수 있었지만, 800$\times$790 크기의 CR 흉부 영상의 경우 약 5 초 정도의 시간이 걸렸다. CDMA 1X(Code Division Multiple Access 1st Generation) 모듈을 사용하여 영상을 전송하는 경우, 256 byte/see 정도에서는 안정된 전송 결과를 보여주었고, 1 Kbyte/see 정도의 전송의 경우 중간 중간에 패킷이 손실되는 결과를 관찰할 수 있었다. 반면 무선 랜의 경우 이보다 더 큰 패킷을 전송하더라도 문제점은 발견되지 않았다. 결론 : 현재의 PACS는 유선과 무선사이의 인터페이스의 부재로 인해 유무선 연동이 되지 못하고 있다. 따라서 이동형 JPEG2000 영상 뷰어는 PACS가 가지는 문제점인 휴대성을 보완하기 위하여 개발되었다. 또한 무선망이 가지는 데이터 손실에 대하여서도 허용할 수 있는 범위에서 재전송을 가능하게 함으로서 약한 연결성을 보완하였다. 본 JPEG2000 영상 뷰어 시스템은 기존 유선상의 PACS와 이동형 장치간에 유기적인 인터페이스 역할을 하리라 기대된다.

  • PDF

A Case Study of Blasting with Electronic Detonator (전자뇌관을 활용한 발파 시공 사례)

  • Hwang, Nam-Sun;Lee, Dong-Hoon;Lee, Seung-Jae
    • Explosives and Blasting
    • /
    • v.34 no.4
    • /
    • pp.40-45
    • /
    • 2016
  • Sites, where explosives are used, are constantly under constraint of vibration and noise levels. If a sensitive area is located nearby the sites, mechanical excavation has been preferred rather than blasting. Recently, however, blasting using electronic detonators is applicable in the areas, where previously should be excavated by mechanical methods. $HiTRONIC^{TM}$ is a fourth-generation detonator that utilizes Hanwha Corporation's advanced electronic technology. The detonator contains IC-Chip, which allows delay times between 0~15,000ms with 1ms interval. Furthermore, the product can provide high accuracy(0.01%) for accurate-blasting. Electronic detonator is widely used in highway and railway construction sites, large limestone quarries, and other works. In this paper, several sites, in which HiTRONIC was used, are introduced in order to enhance understanding of electronic detonator.

Reaction Properties of Non-Cement Mortar Using Ground Granulated Blast Furnace Slag (고로슬래그 미분말을 사용한 무시멘트 경화체의 반응 특성)

  • Park, Sun-Gyu;Kwon, Seung-Jun;Kim, Yun-Mi;Lee, Sang-Soo
    • The Journal of the Korea Contents Association
    • /
    • v.13 no.9
    • /
    • pp.392-399
    • /
    • 2013
  • The purpose of this study is to identify the manufacturing possibility of non-cement mortar using blast furnace slag and alkali accelerator. In this experimental study, the blast furnace slag which is the by-product of the steel industry substitute for cement, and the potassium hydroxide(KOH), calcium hydroxide ($Ca(OH)_2$) and sodium hydroxide(NaOH) as stimulus were added to each specimen. And the analysis on reaction property of non-cement mortar was conducted by measurement such as flexural and compressive strength, XRD, EDS and SEM. From the test results, it can be founded that $SiO_2$ and CaO included in the blast furnace slag are released and make the calcium silicate hydrate like the hydration reaction of the cement. Also, the continued study is need to reduce emission of $CO_2$ because of major content in filed of the building construction.

Analysis of Behavior due to Tendon Damage for Maintenance of PSC I Girder Bridge (PSC I 거더교 유지관리를 위한 긴장재 손상에 따른 거동 분석)

  • Jongho Park;Jinwoong Choi
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.28 no.2
    • /
    • pp.53-60
    • /
    • 2024
  • Prestressed concrete (PSC) bridges are vulnerable to corrosion and fracture of tendons, and in particular, structures using the internal post-tensioned with grouted system have difficulties in maintenance due to limitations of inspection. In this study, the actual behavior of PSC I girder bridge was analyzed according to tendon damage. The target PSC I girder bridge, an decommissioned highway bridge of upper and lower bridges, had the service period of 33 years and 20 years, respectively. Deflection and concrete strain were measured according to the location of damaged tendon and loading method. Regardless of the age of the bridge, its structural performance decreased when the damaged tendon was closer to the center of the girder. The change in behavior increased as the truck load approached to the girder where the tendon cut. If the load was applied to the adjacent girder where the tendon was cut, the structural performance was likely to be maintained due to the influence of the entire structural system. The change in deflection was difficult to observe visually, while the concrete strain exceeded the cracking strain. Therefore, it is recommended that future monitoring and inspection of PSC I girder bridges should focus on concrete strain or cracking.

Differential Power Analysis Attack on Cryptosystem adopted NAF Algorithm as a Secret Key Recoding Method (비밀키를 NAF로 사용하는 암호시스템의 차분 전력분석 공격)

  • Ahn Mahn-Ki;Ha Jae-Cheol;Lee Hoon-Jae;Moon Sang-Jae
    • Journal of Internet Computing and Services
    • /
    • v.4 no.3
    • /
    • pp.1-8
    • /
    • 2003
  • The power analysis attack is a physical attack which can be applied to the cryptosystems such as smartcard. We try to experimental attack to a smart card which implemented Elliptic Curve Cryptosystem adopting NAF algorithm as a secret key recording method. Our differential power analysis attack is a potential threat to that implementation. The attacker measures the power traces during the multiplication with secret key bits in a target smart card and the multiplication with the guessed bits in other experimental one. The comparison of these two traces gives a secret bit, which means that attacker can find all secret key bits successively.

  • PDF

2kW Bidirectional DC-DC Converter for Fuel Cell using Unregulated LLC Resonant Converter (고정시비율 공진 컨버터를 이용한 연료전지용 2kW급 양방향 컨버터)

  • Oh, Eun-Tae;Kim, Won-Yong;Jeong, Yu-Seok;Lee, Jun-Young
    • Proceedings of the KIPE Conference
    • /
    • 2009.11a
    • /
    • pp.78-80
    • /
    • 2009
  • 최근 화석에너지원의 고갈과 고유가 및 지구 온난화 방지를 위해 국가별로 이산화탄소 배출량을 규제하기 시작하면서 신재생 에너지의 사용에 대한 관심이 높아지고 있다. 그 중 연료전지가 한 부분을 차지하고 있으며, 연료전지는 친환경적이고 효율적인 에너지원으로서 근 미래의 새로운 대체 에너지로서 각광 받으며 여러 분야의 전기장치로 사용될 수 있다. 연료전지는 낮은 출력전압과 높은 출력전류를 갖는 특징이 있으며, 부하에 따라 출력전압이 변화하는 특성이 있기 때문에 연료전지의 사용을 위해서는 다양한 부하조건에서 연료전지와 연동된 승압 또는 강압형 컨버터의 제작이 반드시 필요하다. 본 논문에서는 DSP를 이용하여 컨버터의 디지털 제어가 가능하며, 고정 시비율로 동작하는 LLC 공진형 컨버터를 이용한 2kW급 연료전지용 양방향 컨버터를 제안하였다. 제안한 컨버터는 양방향으로 동작하며, 에너지 저장 및 재사용을 목적으로 하고, 출력은 24V 배터리가 된다.

  • PDF

An Analytical Study on the Structural Behavior of the Composite Slab with New-Shaped Deckplate (신형상의 합성용 데크플레이트를 사용한 합성슬래브의 구조적 거동에 관한 해석적 연구)

  • Moon, Tae Sup;Bae, Jong Woo
    • Journal of Korean Society of Steel Construction
    • /
    • v.11 no.2 s.39
    • /
    • pp.181-190
    • /
    • 1999
  • The objective of this study is to investigate the structural behavior of the composite slabs with the new-shaped deckplate. In order to examine the deckplate as structural members, the composite slabs with new-shaped deckplate are compared and verified with the international design codes, and the simple inertia-moment equation of the composite slabs is suggested from the regression analysis of the results of the experiments. Besides, the finite element analysis was added on the purpose of the observation of structural behavior of the section items such as the Locking rib and the Dovetail. 36 experiments of composite slabs were performed with two new-type deckplates. And the finite-element analysis was performed by ABAQUS package with the function of the 3-dimension solid modeling.

  • PDF

Multi-Phase Buck Converter with Fast Transient Response (빠른 응답을 갖는 멀티페이스 벅 변환기)

  • Lee, Yoon-Jae;Roh, Jeongjin
    • Journal of IKEEE
    • /
    • v.20 no.3
    • /
    • pp.314-317
    • /
    • 2016
  • Recently, efforts to maximize battery life in progress with an increase in the demand for portable devices. In this paper, we propose multi-phase buck converter with fast transient response. Multi-phase buck converter may be used for the output capacitor of small size because the ripple cancellation effect, it is possible to use an inductor having an inductance less. The portable device for quick change from standby mode to active 4-phase design structure was given a fast transient response. The proposed multi-phase buck converter was fabricated using a 0.18 um CMOS process and the supply voltage ranges from 2.7V to 3.3V, the maximum load current is 500mA and settling time is 10us.

Component Retrieval using Extended Software Component Descriptor (확장된 소프트웨어 컴포넌트 서술자에 기초한 컴포넌트 저장소의 검색)

  • Geum, Yeong-Uk;Park, Byeong-Seop
    • The KIPS Transactions:PartD
    • /
    • v.9D no.3
    • /
    • pp.417-426
    • /
    • 2002
  • Components are stored in a component repository for later reuse. Effective search and retrieval of desired components in a component repository is a very important issue. It usually takes a lot of time and efforts to gather information about a component, and its availability is essential to implement a repository. Software Component Descriptor proposed in CORBA 3 contains information about a component using an XML vocabulary. In this paper we extend Software Component Descriptor to be useful for the search of a component repository. We use a facet scheme as a search method of a component repository. And our new retrieval method supports queries connected with logical operators such as AND, OR, NOT, which were not supported with existing facet retrieval methods. Also we reduce the search complexity considerably.