• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.407-418
• /
• 2014

As a continuing work of previously conducted standard tension tests, full-scale flexural tests were conducted in this study to assess the structural performance the CJP groove welded joints connecting thick HSA800 plates. Two welding electrodes were available at the time of this experimental research; one was GMAW-based electrode A and the other FCAW-based electrode B. Three full-scale box-type beam specimens with single bevel- and V-groove CJP welded joints were fabricated from 60mm and 25mm thick HSA800 plates according to the AWS-prequalified groove welded joint details. In designing the specimens, all possible limit states like local and lateral torsional buckling were carefully controlled in order to induce flexural plastic yielding or eventual joint fracture. All the CJP joints made by both welding electrodes showed satisfactory performance and were able to transfer the tensile flange forces higher than that corresponding to the measured tensile strength of HSA800 flange plates. However, it should be noted that, during fabrication, serious concerns about the welding efficiency and workability of the GMAW-based electrode were raised by a certified welder. The fracture occurred at the unbeveled (or vertical) interface between the weldment and the base metal when the GMAW-based electrode was used in the single-bevel joint, implying the possibility of insufficient melting. Thus, the FCAW-based electrode B is again recommended as the choice of welding electrode for HSA800 plates. The limited test data of this study implies that the V-groove CJP joint should be used in favor of the single bevel CJP joint, if possible.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.312-316
• /
• 2013

The objective of this study was to establish an analytical method to detect zearalenone (ZEA) in herbal medicines and their decoctions and investigate the ZEA transfer rate from raw materials of herbal medicines to their decoctions. Herbal medicines (Trichosanthis Semenm, Eucommiae Cortex, Rubi Fructus) spiked with a known concentration of ZEA were presoaked or unsoaked (as a pretreatment) and boiled for 3 h at $100^{\circ}C$ or autoclaved for 1 h at $121^{\circ}C$. The decoction and the remnants were separated, cleaned up with an immunoaffinity column, and analyzed using HPLC. Recoveries for decoctions and remnants were 68.39-83.68% and 72.91-80.25%, respectively. ZEA was not detected in the decoction, whereas it was found in the remnants. Although ZEA in the raw material of herbal medicines was not transferred into the decoction during heating and autoclaving, the continuous monitoring for ZEA in raw herbal medicines should be carried out for the safe ingestion and utilization of herbal medicines.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.501-506
• /
• 2002

사람은 누구나 잭이나 문서를 읽을 때 중요한 부분에 강조, 해설, 설명을 하기 위해서 표시를 하거나 글을 입력한다. 이와 같이 원본문서에 추가되는 부가 정보를 Annotation이라고 한다[6][7]. Annotation을 이용하면 차후에 원본문서를 재창조하거나 다른 사람이 원본문서를 참조할 경우 과중한 정보의 양을 극복할 수 있으므로[4], 원본문서의 이해도를 향상시킬 수 있다. 따라서, Annotation은 한번 사용하고 그치는 정보가 아닌 재사용할 수 있는 점보임을 의미한다[1,2,3]. 이러한 Annotation 기능을 웹 문서에 적용하게 되면 종이문서에서 얻을 수 있는 장점뿐만 아니라 웹 환경의 특징인 공유[5], 검색[4], 재편집 등의 기능이 가능하다. 이와 관련한 많은 연구가 진행중에 있다. 그러나, 기존의 Annotation 연구는 Anchor 입력된 다수의 Annotation이 무의미한 출력 순서로 제공되고 있으며, 또한 Anchor에 입력된 Annotation의 출력으로 인해 문서 구조가 변경되거나, 가려지는 등의 문제점으로 사용자들이 쉽게 사용 및 이해할 수 있는 Annotation 출력 인터페이스에 대한 연구가 부족한 실정이다. 따라서, 본 논문에서는 Anchor에 입력된 다수의 Annotation들 간의 의미적 순서를 부여하여 보다 적절한 Annotation에 대한 우선 접근이 가능하도록 계층적인 Annotation 우선처리 기법을 제안하고, Annotation 출력으로 인한 문서 변경 문제를 해결하기 위한 유동적인 Annotation 표현 기법을 제안한다. 또한 Annotation이 문서에 부가된 부가정보의 역할을 뿐만 아니라, 다양한 활용이 가능하도록 XML 표준에 기반한 저장 구조를 지원하며, 원본문서와 분리하여 저장한다.속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.r interferon alfa concentrated solution can be established according to the monograph of EP suggesting the revision of Minimum requirements for biological productss of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한 것으로 보여진다. 그런가 하면, 많이 다루어진 주제라 할지라도 개념이나 용어가 통일되지 않고 사용되며 검증되어 통용되는 측정도구의 부재로 인하여 연구결과의 축적이 미비한 상태이다. 따라서, 이에 대한 재고와 새로운 방향

• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.113-125
• /
• 1998

At the end of 1997 about 3 million tons of coal ash was produced as byproducts from the coal fired electrical power plants in Korea. Only about 27% of that byproducts was utilized as the admixtures of cement and concrete industry. But the large quantity of coal fired fly-ash has been used as the soil improvement materials in other countries. So the aim of this study is the estimation of the applicability of the coal fired fly-ash as microfine grouting materials by admixing the superfine particles which were separated from the coal fired fly-ash for the higher values. The 6 types of specimens were manufactured in the laboratory for the purpose of estimating the chemical and physical properties of cement and grouts. These specimens consisted of 2 specific surfaces of 6, 000 and 8, 000$cm^2$/g in Elaine method. And these specimens are devide into 3 ratios (30%, 50%, 70%) of fly-ash by weight. From the estimated properties of the coal fired fly-ash microflne cements and grouts, 50% fly-ash is the most suitable ratio for grouting materials. However, further study of durability is necessary for using fly-ash grouts practically at the field projects. The higher content of the unburned carbon of fly-ash increases the thinner layer of carbon on the surface of solution of grouts, and requires more quantity of surface active agent. As a results of this study, it is found that the microfine fly-ash is very useful as a good grouting material if 50% of fly-ash is added with the microfine portland cement. So, in the near future, if the coal fired fly-ash is able to be used as grouting material in Korea, the demand of fly-ash will increase rapidly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.116-121
• /
• 2019

In order to evaluating applicability of RAP (recycled aggregate powder) in mortar, in this study, physical and mechanical tests was carried out. Material characteristics of recycled aggregate and RAP were evaluated and the mechanical properties of mortar replaced with RAP were analyzed. Test result of sieve analysis showed that as the milling time increased the fineness modulus was decreased and the distribution of 0.6 mm particle size was found to increase. The fluidity of mortar mixture substituted with RAP tended to increase than Plain mixture. It was result that the increasing fluidity was affected by unreacted surplus water in the mortar as the binder was replaced with RAP. From the compressive strength result of the mortar subjected to RAP, it was found that the RAP was able to replace up to about 10% of unit binder weight although the compressive strength of mortar was decreased as the RAP replacement increased. From the above study, it can be concluded that the physical properties of RAP satisfied the quality standard of aggregate for replacement with fine aggregate. Moreover, in case of the RAP was replaced up to 10% of unit cement weight, it was able to be possible to improve fluidity and compressive strength of mortar.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.542-549
• /
• 2021

The purpose of this study was to provide an economical and easy preparation method for recombinant human epidermal growth factor (rhEGF) without the need for an expensive enzyme to cleave the fusion part. However, the N-terminal fusion part is still useful for affinity chromatography. The hEGF is an important hormone in cell growth and proliferation in humans, and many studies on the expression and purification of this protein have been reported. In the present study, the hEGF gene was designed to be optimized with the E. coli codon usage preference and to contain Asn-Gly at the N-terminus of the protein. The gene was inserted into pRSET_A, an E. coli expression vector, and transformed into E. coli BL21 (DE3). The recombinant fusion protein was successfully co-expressed with pG-Tf2, a chaperone vector, in E. coli and purified by Ni-NTA column chromatography. The rhEGF was then released by hydroxylamine treatment and confirmed by SDS-PAGE. ELISA analysis showed that the activity of the free rhEGF was more than 92% similar to that of commercial EGF. The biological activity of the rhEGF was confirmed by a cell proliferation test with human skin fibroblasts.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2017

Brake squeal noise has been a challenging problems for a long time. It is very annoying to passengers and residents near tracks. Two methods have been applied to reduce or eliminate brake squeal noise. One is to improve frictional materials; the other is to optimize the topology and structures of brake pads. In this study, we developed two kinds of brake pads; one is a pad whose frictional material is different from the KTX brake pad friction material; the other is a flexible pad that has the same frictional material as that of the KTX brake pad, but a different structure. Squeal noise and friction coefficients were measured and analyzed using a full-scale brake dynamometer. It was found that the dynamometer test can simulate the squeal noise of KTX trains at stations. The squeal frequency of the KTX at 4500Hz was exactly reproduced; this value of 4500Hz was one of the natural frequencies of the KTX brake disc. It was also found that the squeal noise depended on the caliper pressure, initial disc temperature and braking speed. The average friction coefficient was 0.35~0.45. The new pad lowered the squeal noise by 17.3~21.6dB(A).

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.81-86
• /
• 2008

This study describes conditions for plant regeneration from protoplasts-derived from embryogenic callus of satsuma mandarin. Plants were generated via somatic embryogenesis. Protoplasts isolated directly from nucellar callus induced from immature ovule of satsuma mandarin cv. Okitsu (Citrus unshiu Marc.) were cultured in 0.6M $BH_3$ medium. Cell division and plating efficiency were affected by protoplast culture method. The liquid over solid method was the most effective for formation of microcalli. Most of microcalli grew rapidly and transferred onto embryoid formation medium. Optimum embryoid formation medium was MT medium containing 1.5 g/L malt extract, 0.146 M sucrose and the medium for plantlet regeneration was MS medium containing 0.09M sucrose, 1.0 mg/L $GA_3$. No differences were noticed in growth habits and leaf characters such as shape, thickness, and colour between protoplast-derived plants and nucellar seedlings. This plant regeneration system from protoplasts-derived from embryogenic callus provides an alternative way for producing new scion and rootstock cultivar from citrus species which can not be crossed.

• Composites Research
• /
• v.34 no.2
• /
• pp.77-81
• /
• 2021

Due to the high specific strength and stiffness of the composite materials, the composite materials have been extensively used in various industries. In particular, carbon fiber reinforced composites are widely used in many mechanical structures. In addition, since carbon fiber reinforced composites have anisotropic properties, to understand the fatigue behavior of composites with different fiber orientation is very important for the efficient structural design. Therefore, in this paper, the effect fiber orientation on the fatigue life of composite materials was experimentally evaluated. For this purpose, tensile and fatigue tests were performed on the off-axis specimens (0°, 10°, 30°, 45°, 60°, 90°) of the composite materials. As a result of the fatigue tests, the fatigue strength of the composites decreased significantly as the fatigue strength slightly deviated from 0 degrees. On the other hand, the more deviated, the less decreased. This is because the role of supporting the load of fibers decreased as the stacking angle increased. In addition, the fatigue behavior was analyzed by introducing a fatigue strength ratio (Ψ) that eliminates the fiber orientation dependence of the off-axis fatigue behaviors on the unidirectional composites. The off-axis fatigue S-N lines can be reduced to a single line regardless of the fiber orientation by using the fatigue strength ratio (Ψ). Using the fatigue Ψ-N line, it is possible to extract back to any off-axis fatigue S-N lines of the composites with different fiber orientations.

• Journal of KIISE
• /
• v.44 no.5
• /
• pp.476-485
• /
• 2017

The tactical operation centers of future anti-aircraft missile systems provide the environment for the research on future air threats, tactical information, integrated battlefield environment creation and management, engagement control and command and control algorithms. To develop the key functional elements of integrated battlefield situation creation and processing and tactical operation automation processing operations, battery/battalion tactical operation control and reconfiguration design software are required. Therefore, the algorithm software of each function and the tactical operation display software and link software for interworking between equipment were developed as reconfigurable through a data-centric design. In this paper, a tactical operation display framework that can be reconfigured on the operation display of the tactical operations according to the battery/battalion is introduced. This tactical operation display framework was used to develop a common data model design for the reconfigurable structure of multi-role tactical operations with battery / battalion and mission views, and a display configuration tool that provides a tactical operation display framework for view development was also developed using the MVC pattern. If the tactical operation display framework is used, it will be possible to reuse the view design through the common base structure, and a view that can be reconfigured easily and quickly will also be developed.