• Journal of Conservation Science
• /
• v.21
• /
• pp.59-72
• /
• 2007

The relationship between soluble salts and microbial growth on stone surface was investigated. Samples from deteriorated surface layers of several stone monuments were collected, and the soluble salts in samples were chemically analysed. According to the results of chemical analyses, $Na_2SO_4$, $CaSO_4$ $2H_2O$, and NaCl and so on were added to isolation media. As a result of preliminary experiments, 15 bacteria were selected. They are all Gram positives and fourteen of them were rods. Every bacteria could grow not only in media without salts, but also in media with $CaCO_3$, $CaSO_4$ $2H_2O$, and $Ca(OH)_2$. Three bacteria, Bl6, B56, and B6l, secreted viscous substances in these $Ca^{2+}$ added media. $CaCl_2$ $2H_2O$ was the most hygroscopic among 11 soluble salts, but it seemed to interfere with bacterial growth. Ammonium ion was the inhibitor, too.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.75-83
• /
• 2017

This study produced smelting slag through the reproduction of an ancient iron manufacturing technique, with the aim of facilitating a comprehensive understanding of the process by analyzing the slag components. The research suggests an interpretation method using the ratio of the subcomponents relative to the main slag components as an alternative to existing methods. We investigated the component source within the smelting furnace from which the slag is derived by developing an understanding of the tendency between slags. Based on bivariate graph and triangular coordinate data analysis, it was found that a slag can be categorized according to its components. The groups were identified as the ore slag group(centered on the ore), and the clay slag group(centered on clay and granite soil). This research determined that it is possible to estimate the components derived from the slag, depending on which group they belong to or resemble, as shown in Figure 4~7. It was found that a comprehensive understanding of the ratio between the components was more accurate than a simple analysis of the contents, for the interpretation of ancient iron manufacturing processes. This is based on the fact that a higher ratio of $TiO_2$ was detected by the components analysis, and an analysis of all the slag showed that the value of $CaO/SiO_2$ ratio was lower than 0.4, which corresponds to the reproduction experiment condition in which flux was not used.

• The Korean Journal of Pesticide Science
• /
• v.21 no.1
• /
• pp.90-96
• /
• 2017

Gray mold disease, cause by Botrytis cinerea, occurs severe damage on varieties of fruit and vegetable production, and have no a critical control method. In case of chemicals control, it is a trigger emergence of drug resistance strains due to using them continuously. In addition, the pathogen is difficult to control naturally because it is possible to survive regardless of host status. In this study, microorganisms were isolated from tomato flower and hive samples and in order to select suitable microbial control agents for tomato gray mold disease. During six-months study, we isolated 1,004 isolates from flower and 925 isolates from pollinator hive samples. Among them, 6 strains were selected based on result of antifungal activity test. The selected strains showed not only strong antifungal activity against gray mold pathogen, but also cellulase and protease enzyme activities. The selected strains were identified as Paenibacillus polymyxa. In plant assay, P. polymyxa prevented the gray mold disease occurrence near 75%.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.96-103
• /
• 2016

The aim of this study was to confirm the effectiveness of learner-centered teaching models to reduce the dental anxiety. 18 children with age of 10 at the case group and 22 children with age of 10 at the control group was completed. Children from case group were participated in learner-centered oral health education, while those from control group were participated in instructor-led oral health education. Dental Anxiety Scale (DAS) at each groups were measured before oral health education, after then, oral health education of two types at each groups were separately conducted during 1-hour, 2 times. Learner-centered oral health education adapted the systematic desensitization (Tell-Show-Do) was conducted for case groups. Instructor-led oral health education was performed by using the presentation file (PPT). The change of Dental Anxiety Scale (DAS) were compare between case and control groups to evaluate the effect of learner-centered teaching type. After oral health education, DAS of the case and control groups at the baseline were 9.61 and 11.14, respectively, and the average DAS decline of case and control groups after oral health education were 2.48 and 0.55, respectively. These findings show that a learner-centered teaching type is an effective oral health program to reduce of dental anxiety in childhood.

• Quality Improvement in Health Care
• /
• v.15 no.1
• /
• pp.73-78
• /
• 2009

문제: 오늘날 간호사는 과거와 달리 현대적 보건의료 요구를 해결할 수 있는 체계적인 이론과 기술을 습득하도록 훈련된 고급 전문 인력이고, 간호행위를 생산하기 위해서는 서비스의 생산원가 뿐만 아니라 전문 인력으로서의 훈련 및 유지비용 등도 투입되어야만 가능하게 함으로서 2008년 7월부터 시행한 중환자실 간호등급에 따른 간호수가 책정으로 인해 중환자실 내에서 이루어지고 있는 많은 간호행위 중 수가를 받을 수 있는 부분이 생기게 되었고 간호행위의 중요성과 더불어 간호를 시행 후 받을 수 있는 수가에 대한 간호사들의 입력에 대한 의무도 늘어나게 되었다. 이에 빈번히 누락되고 있는 간호수가 관리를 통한 경제적 손실을 방지해야 할 필요성을 느껴 개선활동을 하고자 한다. 목적: 2008년 7월부터 시행한 중환자실 간호등급에 따른 간호수가 책정으로 인해 중환자실내에서 이루어지고 있는 간호 행위의 중요성을 인식하고 구체적인 문제 분석과 간호 현장에서의 개선안을 도출함으로써 경제적 손실을 방지할 수 있는 간호수가 누락률을 감소시키고자 함이다. 의료기관: 대구파티마병원 내과 중환자실. 질 향상 활동: 업무개선의 방법으로 환자 개인별 간호수가 입력 누락 방지 체크 리스트 사용 및 처방 전달 시스템의 간호수가 재입력 화면을 이용하여 입력의 용이성 도모하였고 입력된 간호수가를 처방 전달 시스템 간호수가 조회 프로그램을 이용해 익일 누락여부를 매일 모니터링 하였다. 교육 및 홍보활동으로는 간호수가 입력누락 방지를 위한 간호수가 입력 지침을 제작하여 전체간호사는 년 2회, 신규간호사는 개별 교육을 실시하였으며, 월별 간호수가 누락통계를 실명 공고 하여 간호수가 다 빈도 누락 간호사는 추가 개별교육을 실시하였다. 개선효과: 간호수가 입력 프로세스 개선을 통해 간호수가 평균 누락률이 개선 전 6.5%, 개선 후 1.2%로 5.3%의 누락 감소율을 보였으며 역치 5%를 달성하였고 간호수가 누락금액은 개선 전 2,992,752원, 개선 후 590,787원으로 2,401,965원의 누락 효과 비용을 구할 수 있었다. 본 QA활동으로 중환자실 간호수가 전산입력에 대한 체계적인 교육부재와 신규간호사들의 잦은 전산누락이 있어왔으나 표준화 된 체크리스트 지침과 입력확인 작업으로 전산입력 누락률이 감소하는 효과를 가져왔다. 추후 심평원 청구 작업을 하는 부서와 연계되어 실제 청구 누락률에 대한 비교와 간호사 근무연수와 간호수가 입력 누락률에 대한 상관관계 조사를 제언 해 본다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5B
• /
• pp.465-475
• /
• 2004

Transport Control Protocol (TCP) has been implemented in software running on CPU in end systems, and the protocol processing has appeared as a new bottleneck due to advanced link technology. TCP processing is a critical issue in Storage Area Network (SAN) such as iSCSL, and the overall performance of the Storage Area Network heavily depends on speed of TCP processing. TCP Engine implemented in hardware reduces the load of CPU in end systems as well as accelerates the protocol processing, and hence high speed data processing is achieved. In this paper, we have proposed a hardware engine for TCP processing. TCP engine consists of three major block, TCP Connection block Rx TCP block and Tx TCP block TCP Connection block is responsible for managing TCP connection states. Rx TCP block is responsible for receive flow which receives packets from network and sends to CPU. Rx TCP performs header and data processing and sends header information to TCP connection block and Tx TCP block It also assembles out-of-ordered data to in-ordered before it transfers data to CPU. Tx TCP block is responsible for transmit flow which transfers data from CPU to network. Tx TCP performs retransmission for reliable data transfer and management of transmit window and sequence number. Various test-cases are used to verify the TCP functions. The TCP Engine is synthesized using 0.18 micron technology and results in 51K gates not including buffers for temporal data storage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.740-745
• /
• 2016

Cables are installed for tens of thousands of connections between various pieces of equipment to operate and control a commercial ship. The correct shortest-route data is necessary since these are complicated cable installations. Therefore, an overfill interval commonly exists in the shortest paths for cables as estimated by Dijkstra's algorithm, even if this algorithm is generally used. It is difficult for an electrical engineer to find the overfill interval in 3D cable models because the occupancy rate data exist in a data sheet unlinked to three-dimensional (3D) computer-aided design (CAD). The purpose of this study is to suggest a visualization method that displays the cable path and overfill interval in 3D CAD. This method also provides various color visualizations for different overfill ranges to easily determine the overfill interval. This method can reduce cable-installation man-hours from 7,000 to 5,600 thanks to a decreased re-installation rate, because the cable length calculation's accuracy is raised through fast and accurate reviews based on 3D cable visualization. As a result, material costs can also be reduced.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.34-46
• /
• 2005

For treating a huge amount of plastic waste with the environment problem, pyrolysis of plastic waste into alternative fuel oil is one of important issue in recycling methods. This study was introduced over the trend of generation of plastic waste, pyrolysis technology in domestic and foreign countries, basic technology in pyrolysis process and new technology of pyrolysis developed in KIER (Korea Institute of Energy Research). The characteristics of process developed in KIER are the continuous loading treatment of mixed plastic waste with an automatic control system, the minimization of wax production by circulation pyrolysis system in non-catalytic reactor, the reuse of gas produced and the oil recovery from sludge generated in pyrolysis plant, which have greatly the advantage economically and environmetally. The experiment result data in 300 ton/yr pilot plant showed about 81 wt% liquid yield for 3 days continuous reaction time, and also the boiling point distribution of light oil (LO) and heavy oil (HO) produced in distillation tower was a little higher than that of commercial gasoline and diesel, respectively.

• Journal of Wetlands Research
• /
• v.18 no.2
• /
• pp.173-182
• /
• 2016

Although the ecosystem extends numerous functions for the benefit of humankind, construction of horticultural facilities can potentially lead to the degeneration of some of these functions owing to the expansion of impervious regions and loss of habitats. Thus, this study aimed to examine the effect of construction of horticultural facilities on plant biodiversity. Analysis of the vegetation distribution characteristics showed that horticultural facilities had significantly lower plant diversity than did rice paddies. Hence, the proposed approach involved low-impact development, arrangement of habitat space, plant preservation, restricted use of chemical fertilizer, habitat creation, and reduced preservation cost. Lifestyle analysis suggested the importance of developing favorable environments for the growth of annual plants and aquatic plants. In all, 20 species of naturalized plants belonging to 10 families were identified. Furthermore, the proportion of these naturalized plants was higher in glass greenhouses and multi-span greenhouses, suggesting the advantages of employing natural soil mulching while avoiding concrete mulching. Statistical analysis was performed to validate the results, which suggested that impervious regions be converted to natural soils. Collectively, the findings of this study are expected to be used for establishing policies for the construction of eco-friendly and ecological horticultural facilities; this may aid the maintenance of sustainable agricultural landscapes and large-scale development of the reclaimed lands.

• Korea journal of population studies
• /
• v.24 no.1
• /
• pp.67-90
• /
• 2001

Korea National Statistical Office(KNSO) estimated period birth rates, period death rates, and probability of dying for infant(q$q_{0}$) at period life table, considering the unregistered infant deaths. As Ministry of Health and Welfare(MHW) conducted 1993 and 1996 birth cohort infant death surveys. KNSO re-estimated infant mortality levels(especially q$q_{0}$). For the re-estimation, reference data were derived from death registration. MHW surveys, death registration of developed countries. Model Life Tables, and Life Table for Japan. Seventeen simulations were made by the combination of estimation methods and reference data. The final $q_{0}$ was estimated based on the relationship between $q_{0}$ of MHW 1993 survey and $q_{1-4}$ of registered deaths for the period of 1971~1997. For 1993, $q_{0}$ was calculated directly from the 1993 MHW survey and interpolation and extrapolation were made for 1995 and 1997 using the relative decrease rates of $q_{0}$ between 1993 and 1996 MHW surveys. Utilizing the formular of Coale-Demeny North Model, $q_{0}$ was transformed into $m_{0}$ for the period 1971~1997. Finally, cremation data are found to be very useful for the estimation of 1998 infant mortality level by supplementing unregistered infant deaths, especially neonatal deaths. Furthermore, they are found to be very useful to produce fetal and perinatal death statistics.