• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.467-474
• /
• 2010

Recently, Study of functional clothing for Vital sensing is focused on reducing artifact by human motions, in order to enhance the electrocardiogram(ECG) sensing accuracy. In this study, considering the factors for each element found from the analysis, a 3-lead electrode inside textile embroidered with silver yarn was developed, and draft designs off our types of vital-signal sensing garments, which are 'chest-belt typed' garment, 'cross-typed' garment 'x-typed' garment and 'curved x-typed' garment, were prepared. The draft designs were implemented on a sleeveless male shirt made of an elastic material so that the garment and the electrodes can remain closely attached along the contour of the human body, and the acquired data was sent to the main computer over a wireless network. In order to evaluate the effects caused by body movements and the ECG-sensing capability for each type in static and dynamic states, displacements were measured from one and two dimensional perspectives. ECG measurement evaluation was also performed for Signal-to-noise ratio(SNR) analysis. Applying the experimental results, the draft garment designs were modified and complemented to produce two types of modular approaches 'continuous-attached' and 'insertion-detached' for the ECG-sensing smart clothing.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.385-392
• /
• 2019

Currently, plastic bags are being used for sawdust cultivation of shiitake mushroom. However, due to serious environmental problems caused by the use of plastic bags, we studied the efficacy of bottle cultivation method to replace the sawdust bag method. Small detachable plastic bottles (400 g capacity) filled with Quercus spp. sawdust and wheat bran (4:1 w/w) media were incubated for 80 and 120 days. The weight loss (%) of the media was higher for the NIFoS 2464 strain at an approximate light intensity of 300 Lux than light intensity of 500 Lux; the light intensity was associated with the loss of sawdust medium-weight during the cultivation period. The highest yield was observed when the strain was cultivated for 80 days under dark conditions, 40 days under 500 Lux light, and air circulation fan speed of 30 rpm. When incubated for 120 days, mushroom yield in the bottle media was higher at 40 days of light exposure than 20 days of light exposure. In the bottle media incubated for 80 days under dark conditions, the mushrooms fruited due to repetitive water spraying on the top of the media and light stimulation during the fruiting period. The media could be separated from the bottles because the media shrank after the first harvest. These separated plastic bottles could be re-used for mushroom cultivation, thereby reducing the amount of plastic waste.

• Korean Journal of Psychosomatic Medicine
• /
• v.11 no.1
• /
• pp.60-68
• /
• 2003

Objectives: The purpose of this study was to develop a Korean version of the Levels of Emotional Awareness Scale(LEAS-K) and to examine its validity and reliability. Methods: LEAS-K was developed from translating original LEAS into Korean. The subjects were 476 Korean medical students(322 males and 154 females). The internal consistency was evaluated with the Cronbach's alpha coefficients and 40 protocols were independently scored by two raters to confirm interrater reliability. Additionally, a Korean version of 20-item Toronto Alexithymia Scale(TAS-20K), Korean versions of the Openness to Experience Inventory(OE), the Marlowe-Crowne Scale (MCS), the Bendig short form of the Taylor Manifest Anxiety Scale(TMAS) and the Emotional Expressivity Scale(EES) were rated to evaluate concurrent validity. Results: The internal consistency measured by Cronbach's alpha was 0.81 and interrater reliability was high{r(40)=0.99}. Correlation coefficients for concurrent validity were nonsignificant with TMAS and EES. LEAS-K correlated significantly with TAS-20K{r(476)=-0.10, p<0.05}, OE {r(476)=0.10, p<0.05} and MCS {r(476)=0.10, p<0.05}. Conclusion: LEAS-K was demonstrated to have high reliability and validity.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.22-32
• /
• 2011

The present study examined the effects of the complexity of the 3D models on the results of acoustic simulation which is the predominant tool of the acoustical design of buildings. Also, the effects of the 3D model on the auralized sounds were investigated. In order to carry out the study, four 3D models with different levels of complexity were introduced for a real auditorium which have different numbers of surfaces in the persuit of the guidance of odeon room acoustic software. The set-up of models was also based on the level of transition order of the program. And the acoustic experiments were performed measuring room acoustic parameters including SPL, RT, C80, D50. Acoustic computer simulations were performed using four different models. Then, the results of the computer modeling were compared with the measured acoustical parameters. In addition, sound sources were recorded in the field and auralized sounds were made in convolution with the impulse source made from acoustic modeling. Then, subjective tests were undertaken using auralized sounds. As the results, it was found that the result of the acoustic simulation were closer to the real room acoustic properties when 3D model was more particularly made. For the subjective test, the listening materials were acknowledged as similar with the real sound source when more complex 3D model was used. Then, it could be concluded that the complexity of the 3D model affects the results of the acoustic modeling as well as subjective tests.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.265-267
• /
• 2002

인터넷에서 멀티미디어 응용들이 증가함에 따라 서비스 품질(QoS: Quality of Service)을 보장해 줄 수 있는 여러 가지 방안이 제안되어 왔는데, 일반적으로 이들 방안은 확장성과 종단간 QoS 보장 간에 상호 모순이 발생하는 경향을 가지고 있다. 본 논문에서는 이와 같은 상호 모순을 피할 수 있는 QoS 지원 방안으로서 DQSP(Dynamic QoS Support Protocol)를 제안한다. DQSP는 도메인 내에서의 자원 예약과 연결 수락 제어 메커니즘을 정의한다. DQSP는 링크 자원을 각 에지 라우터로부터의 트래픽 클래스별로 동적으로 할당하고 에지 라이투가 자신에게 할당된 링크 자원에 관한 정보를 유지하도록 한다. DQSP는 목적지로의 연결 수락 제어를 위한 QoS 신호 프로토콜이 필요 없이 에지 라우터에서 매 사용자 플로우별로 직접적으로 연결 수락 결정을 내리므로 확장성 문제 및 코어 라우터의 복잡한 기능 요구 사항 문제를 해결한다. 또한 UQSP는 에지 라우터가 트래픽 부하에 따라 자신에게 할당되어 있는 자원을 반납하거나 추가적인 자원을 제공받을 수 있도록 해 자원 오버 프로비져닝으로 인해 발생할 수 있는 비효율적인 자원 활용 문제를 해결한다. 또한 DQSP는 경로 재계산을 수행하여 라우팅을 조정해 나감으로써 효율적일 네트워크 자원 활용이 가능하다. 시뮬레이션을 통하여 DQSP와 기존의 자원 할당 및 공유 방식들을 비교한 결과 DQSP가 시그널링과 상태 정보 유지를 위한 오버헤드 면에서 기존의 종단간 QoS 보장을 제공하는 구조인 IntServ에서와 같은 확장성 문제를 발생시키지 않으면서도 효율적으로 네트워크 자원을 활용할 수 있음을 확인할 수 있었다.재 상용화 되어있는 Bellcore 의 S/KEY 시스템과의 비교를 수행하였다. 분석에서는 제품의 효율성뿐만 아니라 보안성을 중요하게 생각하였으며, 앞으로 보안 관련 소프트웨어 개발에 사용될 수 있는 도구들이 가이드 라인에 대한 정보를 제공한다.용할 수 있는지 세부 설계를 제시한다.다.으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)이 각각

• Membrane Journal
• /
• v.17 no.3
• /
• pp.197-209
• /
• 2007

In this study, a multi-staged pilot-scale membrane plant was constructed and operated for the separation of $CO_2$ from LNG-fired boiler flue gas of 1,000 $Nm^3/day$. The target purity and recovery ratio of $CO_2$ required for the pilot plant were 99% and 90%, respectively. For this purpose, we previously developed the asymmetric polyethersulfone hollow fibers and evaluated the effects of operating pressure and feed concentration of $CO_2$ on separation performance[1,2]. The permeation data obtained were also analyzed in relation with the numerical simulation data using counter-current flow model[3,4]. Based on these results, we designed and prepared the demonstration plant consisting of dehumidification process and four-staged membrane process. The operation results using this plant were compared with the numerical simulation results on multi-staged membrane process. The experimental results matched well with the numerical simulation data. The concentration and the recovery ratio of $CO_2$ in the final stage permeate stream were ranged from $95{\sim}99%$ and $70{\sim}95%$, respectively, depending on the operating conditions. This study demonstrated the applicability of the membrane-based pilot plant for $CO_2$ recovery from flue gas.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.37-45
• /
• 2006

For treating a huge amount of plastic waste with the environment problem, pyrolysis of plastic waste into alternative fuel oil is one or important issue in recycling methods. This study was introduced over the trend or generation of plastic waste, in Korea pyrolysis technology in domestic and foreign countries, basic technology in pyrolysis process and new technology of pyrolysis developed in KIER (Korea Institute of Energy research). The characteristics of process developed in KIER are the continuous loading treatment or mixed plastic waste with an automatic control system, the minimization of wax production by circulation pyrolysis system in non-catalytic reactor, the reuse of gas produced and the oil recovery from sludge generated in pyrolysis plant, which have greatly the advantage economically and environmetally. The experiment result data in 300 ton/yr pilot plant showed about $81\;wt\%$ liquid yield for 3 days continuous reaction time, and also the boiling point distribution of light oil (LO) and heavy oil (HO) produced in distillation tower was a little higher than that of commercial gasoline and diesel, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.16-23
• /
• 2016

DFRCC (ductile fiber reinforced cementitious composites), which are a significantly improved ductile material compared to conventional concrete, were evaluated as a new construction material with a high potential applications to concrete structures for a range of purposes. In this study, experiments on the failure behavior of composite beams with a DFRCC and FRP (fiber reinforced polymer) plank with a rib used as permanent formwork and tensile reinforcement were carried out. A normal concrete and a fiber reinforced concrete with PVA series of RF4000 and the PP series of PP-macro were used for comparison, and each RF4000+RSC15 and PP-macro+RSC15 was tested by producing composite beams. The experimental results of the FRP plank without a sand coating showed that sliding failure mode between the FRP plank and concrete started from a flexural crack at the beam center; therefore it is necessary for the FRP plank to be coated with sand and the effect of the fiber to failure mode did not appear to be huge. The experiment of the FRP plank with a sand coating showed that both 1200mm and 2000mm allowed sufficient bonding between the concrete and FRP plank. The maximum load of the fiber reinforced concrete was higher than that of normal concrete and the case which a series of PP fiber was mixed showed the highest value. The crack latency caused by the fibers led to composite action with a FRP rib.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.159-166
• /
• 2018

In this study, the internal structural design, dynamic characteristics and load analyses of the small scaled rotor blade required for LCH(Light Civil Helicopter) main rotor wind tunnel test were carried out. The test is performed to evaluate the aerodynamic performance and noise characteristics of the LCH main rotor system. Therefore, the Mach-scale technique was appled to design the small scaled blade to simulate the equivalent aerodynamic characteristics as the full scale rotor system. It is necessary to increase the rotor speed to maintain the same blade tip speed as the full scale blade. In addition, the blade weight, section stiffness, and natural frequency were scaled according to the Mach-type scaling factor(${\lambda}$). For the design of skin, spar, torsion box, which are the main components of the blade, carbon and glass fiber composite materials were adopted, and composite materials are prepreg types that can be supplied domestically. The KSec2D program was used to evaluate the section stiffness of the blade. Also, structural loads and dynamic characteristics of the Mach scale blade were investigated through the comprehensive rotorcraft analysis program CAMRADII.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.50-57
• /
• 2011

This study investigates the structural safety of typical greenhouse to be utilized for developing plant factory. New long-span greenhouse systems were presented according to the results of structural analyses performed by finite-element program, ABAQUS. Reasonable values of design loads such as wind and snow loads in the Greenhouse Design Specifications (1995) were applied to check the new greenhouse systems. It was concluded that the new greenhouse systems were consistently safe enough to resist to both wind load and snow load. The new greenhouse system can be used to make simple and economic plant factory.