• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.29-34
• /
• 2021

Purpose Sample reception environment system in nuclear medicine has not changed much compared to 20 years ago. When preparing sample for in vitro test, there was no significant change because the test was carried out by generating an own specimen from the parent specimen. In this study, We would like to introduce a method that automatically removes the sample cap using the automated decapper equipment and enables automatic reception at the same time. In addition, including a provisional reception system. Materials and Methods In 2019, it was intended to get a device that automatically removes the cap of a patient's blood sample. This equipment is the same as the equipment used in the Department of Laboratory Medicine (Vacuette Ⓡ Unicap Belt Decapper, Greiner bio-one, Austria). However, the purchase was delayed due to differences in tube size, budget, and space. In January 2020, we borrowed domestic automatic decapper equipment and modified it to suit our laboratory environment. After 9 months, we were able to introduce a system that automatically removes the lid of a patient's blood sample and at the same time automatically accepts the test. And, through the provisional reception system, it was possible to know the arrival of the specimen in a short time. Results With the use of an automatic decapper device, the sample cap was automatically removed, and the reception proceeded at the same time. So, it was very efficient at work because it shortened the sample preparation time by about 20 minutes. In addition, it was possible to prevent the examiner's musculoskeletal disorders caused by repeated wrist use. After using the provisional reception system, patients were able to be discharged quickly, and the number of phone calls to confirm the arrival of samples was reduced. Conclusion Most hospitals have about four employees in the nuclear medicine in vitro laboratory. It is effective to use automatic decapper equipment and a provisional reception system for organizations that perform work with the minimum number of personnel.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.145-159
• /
• 2004

The conventional method for assessment of liquefaction potential proposed by Seed and Idriss has been widely used in most countries because of simplicity of tests. Even though various data such as stress, strain, stress path, and excess pore water pressure can be obtained from the dynamic test, especially, two simple experimental data such as the maximum deviatoric stress and the number of cycles at liquefaction have been used in the conventional assessment. In this study, a new detailed assessment for liquefaction potential to reflect both characteristics of real earthquake motion and dynamic soil resistance is proposed and verified. In the assessment, the safety factor of the liquefaction potential at a given depth of a site can be obtained by the ratio of a resistible cumulative plastic shear strain determined through the performance of the conventional cyclic test and a driving cumulative plastic shear strain calculated from the shear strain time history through the ground response analysis. The last point to cumulate the driving plastic shear strain to initiate soil liquefaction is important for this assessment. From the result of cyclic triaxial test using real earthquake motions, it was concluded that liquefaction under the impact-type earthquake loads would initiate as soon as a peak loading signal was reached. The driving cumulative plastic shear strain, therefore, can be determined by adding all plastic shear strains obtained from the ground response analysis up to the peak point. Through the verification of the proposed assessment, it can be concluded that the proposed assessment for liquefaction potential can be a progressive method to reflect both characteristics of the unique soil resistance and earthquake parameters such as peak earthquake signal, significant duration time, earthquake loading type, and magnitude.

• Management & Information Systems Review
• /
• v.38 no.4
• /
• pp.1-24
• /
• 2019

This study confirms the responses of consumers when the composition of emoticon bundles can be selected by individuals in MIM service. This aims to verify that customized bundling is a valid marketing strategy in the MIM emoticon market. Currently, the emoticon bundling used in Korean MIM services is in the form of pure bundling. As a result, Consumers must purchase an entire bundle even though he/she doesn't need to use all the emoticons contained in it. Some researches(e.g. Hitt & Chen, 2005; Wu & Anandalingam, 2002) show that when consumers value only part of the products or services included in pure bundling, customized bundling is much more profitable. In their works, customized bundling is appropriate when marginal costs are near zero. Information goods, such as emoticons, meet the condition. On the other hand, customized bundling increase the choosable options, so it can pose a problem of complexity (Blecker et al., 2004). And consumers may experience information overload(Huffman & Kahn, 1998). Thus, judgement on the necessity to introduce customized bundling needs to be made through empirical analyses in the light of characteristics of the product and the reaction of consumers. Results show that when customized bundling was introduced, consumers' purchase intention and willingness to pay significantly increased. Purchase intention for customized bundles has increased by 0.44 based on the five point Likert scale than the purchase intention for existing pure bundles. The increase in purchase intention for customized bundles was statistically independent of the existing purchasing experience. In addition, the willingness to pay was increased by about 2.8% compared to the price of the existing emoticon bundles in the whole group. The group with experience in purchasing pure bundles were willing to pay 5.9% more than pure bundles. The other group without experience in purchasing pure bundles were willing to buy if they were about 5% cheaper than the existing price. Overall, introducing customized bundling into emoticon bundles can lead to positive consumers responses and be a viable marketing strategy.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.25-28
• /
• 2021

Purpose CA 72-4 is a tumor marker that uses two monoclonal antibodies, CC49 and B72.3, to measure tumor-related glycoprotein(TAG72) in the serum. CA 72-4 is used to diagnose stomach, ovarian, and pancreatic cancers, and is known to perform high specificity for stomach cancer. The purpose of this study is to re-evaluate the reference value provided by the manufacturer through revalidation of the reference value in CA 72-4. Furthermore this study was conducted to provide useful help when making a clinical diagnosis at gastric cancer center. Materials and Methods We selected 271 patients who had been to health care center in national cancer center for the month of November 2020. The gender of the subjects was 140 males and 131 females, and the age group was from 30s to 60s. The reagent used in the study was a CA 72-4 IRMA KIT (ISOTOPES, Hungary) and the results were measured using a Dream Gamma-10 gamma counter (Shinjin medics, Korea). Results Statistical analysis of the results of this study used Hoffmann's method and Bayesian's method, which are primarily used in setting reference value. As a result of measuring CA 72-4 of 271 patients, the mean value was 4.54 U/mL and the median value was 3.30 U/mL. 24 people who deviated from 3SD were excluded from the measured value, the mean calculated after that was 3.53 U/mL, median was 3.00 U/mL and SD was 1.89. The reference value calculated based on this results was set to 7.31 U/mL. Conclusion The reference value provided by the manufacturer is less than 4 U/mL. It is slightly different from the value calculated in this study, 7.31 U/mL, so it seems necessary to reset the reference value according to the laboratory environment. Currently, we are receiving inquiries about the reference value from the center for gastric cancer at National Cancer Center. If additional research is carried out along with this study, it will be possible to set more accurate reference value.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1308-1314
• /
• 1999

The effects of modified atmosphere(MA) packaging and coating on the quality of mushroom (Agaricus bisporus) were investigated. Whole mushrooms(100 g) were packed with polyvinyl chloride(PVC) film wrap, PD941 and PD961 film bags and were stored in a chamber at $12^{\circ}C$ and 80% RH for 6 days. Gas composition of packages, respiration rate, weight loss, color and maturity index of MA packaged mushrooms were examined. The wrap packaged mushrooms showed different level of internal $CO_2$ concentrations among water washed, chitosan coated and $CaCl_2$ coated subgroups significantly at 5% level. The maximum $CO_2$ concentration of PD941 and PD961 packages for all coated showed $4.1{\sim}4.7%$ and $10.4{\sim}11.7%$, respectively, for the first day. PD961 package showed the lowest $O_2$ concentration compared to other groups. There were no significant respiration rate differences between wrap packed and PD941 packaged. Respiration rate of water washed. chitosan coated and $CaCl_2$ coated in PD961 packaged was 192 mg, 226 mg and 245 mg, respectively. Maturity index of PD961 packaged were not significantly different among the water washed, chitosan and $CaCl_2$ coated packages. Chitosan coating showed a negative effect on color change of mushrooms. The weight loss of 961 packaged was lower $(7.0{\sim}8.0%)$ that those of wrap packaged and PD941 packaged.

• Korean journal of applied entomology
• /
• v.42 no.3
• /
• pp.173-184
• /
• 2003

Beetles belonging to the families Scolytidae, Platypodidae, Bostrichidae, and Lyctidae intercepted from imported timbers at Busan port were investigated from March 1 to November 30 in 2000. In addition, hosts imported country were examined. A total of 52 species of within 23 genera was intercepted from nineteen species of timbers or logs from fifteen countries. In Scolytidae, 35 species of 16 genera in three subfamilies were identified 12 species in Xyleborus, 6 species in Ips, 3 species in Trypodendron, 2 species in Arixyleborus, and 12 species of all different genera including Alinphagous. Scolytidae were intercepted from 16 species of timbers in 13 genera imported from 11 countries. The highest beetles were intercepted from Malaysian lauan. In Platypodidae, 9 species of one genus (Platypus) were intercepted from 6 species of timbers in 4 genera imported from 6 countries including Australia. The highest numbers were intercepted from Malysian lauan. In Bostrychidae, 5 species of 4 genera in two subfamilies were intercepted from 6 species of timbers in 4 genera imported from four countries. In Lyctidae, Trogoxylon sp., Minthea sp., and Minthea rugicollis were intercepted from 3 species of timbers in 2 genera imported from 3 countries.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.190-205
• /
• 2016

Buddhist stupas, which are a symbolic architecture of Buddhism and enshrine the Jinsinsari of Buddha, were reinvented as stone stupas appropriate for the natural soil of Korea from existing wooden stupas around the 7th century after the introduction of Buddhism. Later, the construction of a stone stupa was expanded to local areas from the central area around the 9th century; thus, stone stupas of more diverse local colors were built in a nationwide scale, and today it is called a "country of stone stupas". While focusing on the stylistic interchanges between stone stupas, which were established in each region in accordance with the localization of the establishment of stone stupas that was begun actively from the 9th century, this paper selected several cases of stone stupas among about 50 stone stupas in the Gangwondo-region. First, the study compared the stone stupas and Buddhist priest tower of Seollimwonji, Jinjeonsaji, and Geodonsaji, which are located at the same temple site as the current Buddhist priest tower, from among typical Silla style stupas that match the 9 stone stupas in the Gangwon-do region. This is because stylistic interchanges were possible while there were mutually organic relationships between Buddhist statues such as stone stupas, Buddhist priest towers, stone lanterns, and Buddhist pedestals, which used the same stone material along with the expansion of Buddhism to local areas in accordance with the spread of Zen Buddhism in the 9th century. Second, a comparison was made of the stylistic similarities between the Woljeongsa Palgakgucheong (eight sides nine-storied) stone stupa and the Sinboksaji Samcheung (three-storied) stone stupa, which are totally different in regard to the number of stories and the flat form. These two stone stupas are representative Goryeo stone stupas. The Woljeongsa stone stupa is a Goguryeo-oriented stone stupa with many sided multiple stories whereas the Sinboksaji stone stupa has been known as an early case of the insertion of the support of Tapsin in each story. Although the two stone stupas may look very different, but through close investigation it was confirmed that there were many stylistic interchanges between them and not only the seated stone Buddha statue in the cylinder jewel case in front of the stupa but also the stone stupa established by the same master. Consequently, this paper aimed not merely to mention the simple patterns of stone stupas, but, further, to trace the interchange in patterns in accordance with the construction period based on those patterns.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.179-222
• /
• 2005

Studies prosecuted on relics in those 17 bronze workshops that have been thus far excavated show that these workshops may be roughly classified into a royal workshop, a state-operated workshop and a private workshop depending upon by whom they were operated. Workshops in the Gyeongju area developed from a small royal handicraft manufacturing to a large state-operated handicraft manufacturing scale, and then later on gradually changed to a private handicraft manufacturing industry. The royal bronze workshops were operated in a small scale, as shown from the relics excavated at Wolseong(月城), Imhaejeonji(Anapji:雁鴨池) and their neighborhood places around Hwangnam_dong(皇南洞). The state-operated bronze workshops are concentrated upon one point around Dongcheon-dong(東川洞), Gyeongju city. On the other hand, in the state-operated workshop stage, a broad street was built by a workshop, which is presumed to aim to thoroughly transport materials needed for the workshop. And the point that wastes from bronze workshops were used for road repairs indicates that road repair works were carried at the bronze workshops near the road. The private workshop as a new type of workshop was operated by the aristocracy. For that purpose, craftsmen belonging to state-operated workshops or individual artisans were absorbed into the aristocracy-operated workshops. These types of workshops were pervaded throughout the city. When private workshops came to emerge in the houses of the aristocracy, the operating subjects of workshops began to change from state-operated to private workshops. Temple workshops were located at a Buddhist temple within the Court and directly produced things needed for the court, including bronze foundries. As aforementioned, through the presence of bronze workshops operated in the Silla Court, we can identify the relationships between their technical level and trading areas and among their origin, supply and demand sources, along with phases of social life in those days.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.75-81
• /
• 2019

Purpose: Helmet type bolus for 3D printer is being manufactured because of the disadvantages of Bolus materials when photon beam is used for the treatment of scalp malignancy. However, PLA, which is a used material, has a higher density than a tissue equivalent material and inconveniences occur when the patient wears PLA. In this study, we try to treat malignant scalp tumors by using M3 wax helmet with 3D printer. Methods and materials: For the modeling of the helmet type M3 wax, the head phantom was photographed by CT, which was acquired with a DICOM file. The part for helmet on the scalp was made with Helmet contour. The M3 Wax helmet was made by dissolving paraffin wax, mixing magnesium oxide and calcium carbonate, solidifying it in a PLA 3D helmet, and then eliminated PLA 3D Helmet of the surface. The treatment plan was based on Intensity-Modulated Radiation Therapy (IMRT) of 10 Portals, and the therapeutic dose was 200 cGy, using Analytical Anisotropic Algorithm (AAA) of Eclipse. Then, the dose was verified by using EBT3 film and Mosfet (Metal Oxide Semiconductor Field Effect Transistor: USA), and the IMRT plan was measured 3 times in 3 parts by reproducing the phantom of the head human model under the same condition with the CT simulation room. Results: The Hounsfield unit (HU) of the bolus measured by CT was $52{\pm}37.1$. The dose of TPS was 186.6 cGy, 193.2 cGy and 190.6 cGy at the M3 Wax bolus measurement points of A, B and C, and the dose measured three times at Mostet was $179.66{\pm}2.62cGy$, $184.33{\pm}1.24cGy$ and $195.33{\pm}1.69cGy$. And the error rates were -3.71 %, -4.59 %, and 2.48 %. The dose measured with EBT3 film was $182.00{\pm}1.63cGy$, $193.66{\pm}2.05cGy$ and $196{\pm}2.16cGy$. The error rates were -2.46 %, 0.23 % and 2.83 %. Conclusions: The thickness of the M3 wax bolus was 2 cm, which could help the treatment plan to be established by easily lowering the dose of the brain part. The maximum error rate of the scalp surface dose was measured within 5 % and generally within 3 %, even in the A, B, C measurements of dosimeters of EBT3 film and Mosfet in the treatment dose verification. The making period of M3 wax bolus is shorter, cheaper than that of 3D printer, can be reused and is very useful for the treatment of scalp malignancies as human tissue equivalent material. Therefore, we think that the use of casting type M3 wax bolus, which will complement the making period and cost of high capacity Bolus and Compensator in 3D printer, will increase later.

• Journal of the Korean earth science society
• /
• v.21 no.5
• /
• pp.503-524
• /
• 2000

Intercomparisons between four kinds of data have been done to estimate the accuracy of satellite observations and model reanalysis for middle and lower tropospheric thermal state over regional oceans. The data include the Microwave Sounding Units (MSU) Channel 2 (Ch2) brightness temperatures of NOAA satellites and the vertically weighted corresponding temperature of ECMWF GCM (1980-93). The satellite data for midtropospheric temperatures are MSU2 (1980-98) in nadir direction and SC2 (1980-97) in multiple scans, and for lower tropospheric temperature SC2R (1980-97). MSU2 was derived in this study while SC2 and SC2R were described in Spencer and Christy (1992a, 1992b). Temporal correlations between the above data were high (r${\ge}$0.90) in the middle and high latitudes, but low(r${\sim}$0.65) over the low latitude and more convective regions. Their values with SC2R which included the noises due to hydrometeors and surface emission were conspicuously low. The reanalysis shows higher correlation with SC2 than with MSU2 partially because of the hydrometeors screening. SC2R in monthly climatological anomalies was more sensitive to surface thermal condition in northern hemisphere than MSU2 or SC2. The first EOF mode for the monthly mean data of MSU and ECMWF shows annual cycle over most regions except the tropics. The mode in MSU2 over the Pacific suggests the east-west dipole due to the Walker circulation, but this tendency is not clear in other data. In the first and second modes for the Ch2 anomalies over most regions, the MSU and ECMWF data commonly indicate interannual variability due to El Ni${\tilde{n}$o and La Ni${\tilde{n}$a. The substantial disagreement between observations and model reanalysis occurs over the equatorial upwelling region of the western Pacific, suggesting uncertainties in the model parameterization of atmosphere-ocean interaction.