• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.72-79
• /
• 2010

The significant of continuous welded rail (CWR) management is growing because KORAIL has the plan to convert the whole of conventional railway lines into CWRs through continuous activities since constructed the CWR track with 1.8km in Gyeongbu line in 1966. The CWR recently is needed a efficient management method because it is difficult to manage the CWR by the poor of technic and equipment, limited maintain labor force and shorted the maintain work time of CWR caused by industrialization, greenhouse effect and global warming In this point, The 70ton Tenser's which is using in the rail site has been analysised with no extra tenser's capacity in case of the under low temperature and exceed the length of 1km as a result of reviewing the CWR-related rules and standards, a series of records of safety accidents, operation obstacles, and the situation of broken rails published by KORAIL, existing rail temperature measurements, and CWR researches. Therefore avoid the excessive plan of the first set-up section, choice the proper time in the normal temperature that is possible to weld the rail, turning the difference of rail temperature and Installation temperature down is desirable.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.473-480
• /
• 1996

영광 3/4호기 mid-loop 운전중 잔열제거(RHR) 기능 상실사고시 열수력적 현상을 최적 전산코드인 CATHARE2를 이용하여 해석하였다. 이러한 사고시 열수력적 현상은 일,이차측 냉각재 방출유로와 계통내 비응축성 가스의 거동에 의해 크게 영향을 받는다. 본 연구에서는 2개의 경우를 모의하였는데, 하나는 계통내 방출유로가 있는 경우이며 다른 하나는 방출유로가 없는 경우를 계산하였다. 이 때 사용된 가정은 다음과 같다. (가) 계통은 부분충수 운전 상태로 상부에 비응축성 가스나 증기로 가득 차 있다. (나) 증기발생기는 1대만이 이용 가능하고 이차측은 습식보관 상태이며, 보조급수는 공급되지 않고 이차측 압력은 대기압 상태이다 (다) 사고는 원자로 정지후 2일후 발생한다. 이와같은 조건하에서 사고시 계통 최대압력은 방출유로가 있는 경우 사고후 6,000 초에 0.27 MPa이며, 방출유로를 통한 유량은 총 2.4 kg/s이다. 이 방출유량을 외삽하여 계통수위가 고온관 바닦까지 도달하는데 걸린 시간은 사고후 약 5.67시간이다. 증기발생기 U-튜브를 통한 열전달에 의해 이차측 증기 발생으로 이차측 수위가 하락하면 증기발생기 reflux cooling은 제한을 받을 수 있다. 이 경우 이차측 수위가 U-튜브의 active 영역 상부까지 도달하는데 걸리는 시간은 사고후 약 10시간으로 계산되었다. 그러므로 이 경우 보조급수 공급 여유시간보다 노심 노출시간이 더 빨리 도달하여 노심을 손상시킨다. 사고시 수위지시계는 계통감압에 큰 영향을 주지 못하기 때문에 가능한 빨리 닫아 계통 inventory를 유지하는 것이 이차측 보조급수공급보다 우선한다.합한 설계방안으로 분석되었다.크다는 단점이 있다.TEX>$_2$O$_3$ 흡착제 제조시 TiO$_2$ 함량에 따른 Co$^{2＋}$ 흡착량과 25$0^{\circ}C$의 고온에서 ZrO$_2$와 $Al_2$O$_3$의 표면에 생성된 코발트 화합물을 XPS와 EPMA로 부터 확인하였다.인을 명시적으로 설명할 수 있다. 둘째, 오류의 시발점을 정확히 포착하여 동기가 분명한 수정대책을 강구할 수 있다. 셋째, 음운 과 정의 분석 모델은 새로운 언어 학습시에 관련된 언어 상호간의 구조적 마찰을 설명해 줄 수 있다. 넷째, 불규칙적이며 종잡기 힘들고 단편적인 것으로만 보이던 중간언어도 일정한 체계 속에서 변화한다는 사실을 알 수 있다. 다섯째, 종전의 오류 분석에서는 지나치게 모국어의 영향만 강조하고 다른 요인들에 대해서는 다분히 추상적인 언급으로 끝났지만 이 분석을 통 해서 배경어, 목표어, 특히 중간규칙의 역할이 괄목할 만한 것임을 가시적으로 관찰할 수 있 다. 이와 같은 오류분석 방법은 학습자의 모국어 및 관련 외국어의 음운규칙만 알면 어느 학습대상 외국어에라도 적용할 수 있는 보편성을 지니는 것으로 사료된다.없다. 그렇다면 겹의문사를 [-wh]의리를 지 닌 의문사의 병렬로 분석할 수 없다. 예를 들어 누구누구를 [주구-이-ν가] [누구누구-이- ν가]로부터 생성되었다고 볼 수 없다. 그러므로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.5
• /
• pp.919-929
• /
• 2013

Recently, a variety of IT technologies are applied to the vehicle. However, some vehicle-IT technologies without security considerations may cause security problems. Specially, some researches about a smart key system applied to automobiles for authentication show that the system is insecure from replay attacks and modification attacks using a wireless signal of the smart key. Thus, in this paper, we propose an authentication method for the driver by using driving patterns. Nowadays, we can obtain driving patterns using the In-vehicle network data. In our authentication model, we make driving ppatterns of car owner using standard normal distribution and apply these patterns to driver authentication. To validate our model, we perform an k-fold cross validation test using In-vehicle network data and obtain the result(true positive rate 0.7/false positive rate is 0.35). Considering to our result, it turns out that our model is more secure than existing 'what you have' authentication models such as the smart key if the authentication result is sent to the car owner through mobile networks.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1452-1456
• /
• 2008

For the effective use of salmon processing by-products, the food components of salmon frame muscle were investigated and compared with those of fillet muscle. The proximate composition of salmon frame muscle was 73.2 g/100 g muscle for the moisture, 76.9 g/100 g dry material for the protein, 15.7 g/100 g dry material for the lipid and 4.1 g/100 g dry material for the ash. pH and volatile basic nitrogen (VBN) content of salmon frame muscle were 6.63 and 16 mg/100 g, respectively. The proximate composition, pH and VBN of salmon frame muscles were similar to those of salmon fillet muscle. The Hunter values of salmon frame muscle were 55.34 for L value, 16.60 for a value, 19.99 for b value and 48.83 for ${\Delta}E$ value, which were different compared to the salmon fillet muscle. The trichloroacetic acid (TCA) soluble-N content of salmon frame muscle was 542 mg/100 g, which was lower than that of salmon fillet muscle. No difference was found in fatty acid composition, total amino acid, calcium, phosphorus contents and sensory evaluation between salmon frame muscle and salmon fillet muscle. These results suggested that muscle from salmon frame could be used as resources for seafood processing.

• The KIPS Transactions:PartB
• /
• v.10B no.6
• /
• pp.599-610
• /
• 2003

The Web plays an important role as information source and most Web applications are document-centric. A document implies an intention of its own designer, which can be utilized actively in automation of business processes. Through an understanding of an intrinsic nature of a document function, we can see a document as an executable computer program in a special case. For this approach, we propose an active document model that is composed of form, knowledge base, rules, and queries. For reusability and interoperability of a document, each component of the proposed model is uniformly represented in XML. The proposed active document not only plays a passive role in providing user interfaces, but also is a document that a machine can infer and process with reading a procedure of document processing and business rules intended by document designers. Through this approach, document can interact with machines and can cooperate with other applications. For applicability of our active document, we show a case study for the processing of purchase orders in a B2B e-Commerce system. This paper is expected to provide the framework of accelerating the development of intelligent applications through our approach regards form document as a computer program. In short, the proposed active document contains knowledge representation and processing method, consequently our document will play an important role in providing a concept of document of pursuing in Semantic Web.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.727-736
• /
• 2010

This paper describes results of an preliminary study to produce strain hardening cement-based composites (SHCCs)with consideration of sustainability for infrastructure applications. The aims of this study are to evaluate the influence of recycled materials on the mechanical characteristics of SHCCs, such as compressive, four-point bending, and direct tensile behaviors, and to give basic data for constitutive model for analyzing and designing infra structures with SHCCs. In this study, silica sand, cement, and PVA fibers, were partially replaced with recycled sand, fly-ash, and FET fibers in the mixture of SHCCs, respectively. Test results indicated that fly-ash could improve both bending and direct tensile performance of SHCCs due to increasing chemical bond strength at the interface between PVA fibers and cement matrices. However, SHCCs replaced with PET fibers showed much lower performance in bending and direct tensile tests due to originally low mechanical properties of own fibers, although compressive behavior is similar to PVA2.0 specimen. Also, it was noted that the recycled sand would increase elastic modulus of SHCCs due to larger grain size compared to silica sand. Based on pre-set target value to maintain the performance of SHCCs, it was concluded that the replacement ratio below 20% of fly-ash or below 50% of recycled sands would be desirable for creating sustainable SHCCs.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.15-22
• /
• 2006

ln order to manage efficiently many ancient wooden buildings, which have been preserved as cultural properties in Korea, the internal state of wood members should be evaluated exactly and periodically by a NDE (non-destructive evaluation) method. A research project was planned to develop an X-ray CT (computed tomography) system as a NDE method for wood, which could be easily applied in field. This paper includes the first part of this project. First of all, to establish a measuring procedure of wood density using X-ray radiography, the correlation between X-ray intensity and the film brightness was evaluated. Also, initial X-ray intensity was quantified with various radiate conditions controlled by the tube voltage and tube current. And then, the effects of density, annual ring angle, and thickness on the mass attenuation coefficient of wood were examined. Finally, Beer's law was modified with the above results and adopted to calculate the density of wood. As a result of this study, the measuring procedure of wood density was established using a portable soft X-ray device and this procedure was verified with some small wood specimens. This results will he used valuably for the following researches to develop a portable X-ray CT system.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.456-462
• /
• 2015

365 pieces of domestic $38{\times}140{\times}3600mm$ Red pine structural lumber were machine graded conforming to a softwood structural lumber standard (KS F 3020). The allowable bending stresses calculated for each grade were compared with the values currently tabulated in the standard. Four calculation methods for lower $5^{th}$ percentile bending stress were non-parametric estimation with 75% confidence level, 2-parameter and 3-parameter Weibull distribution fit, and bending modulus of rupture (MOR)-modulus of elasticity (MOE) regression based method. Only the data set of Grades E8, E9, and E10 were statistically eligible for the $5^{th}$ percentile calculation. The MOR-MOE regression based method only was able to estimate the lower $5^{th}$ percentile values theoretically for the full range of grades. The results showed that all allowable bending stresses calculated were lower than the design values tabulated in the standard. This implies that the current machine grading system has the pitfall of structural safety. Improvement in current machine grading system could be achieved by introducing the bending strength and stiffness combination grade system.

• Journal of Korea Water Resources Association
• /
• v.47 no.2
• /
• pp.183-194
• /
• 2014

Discussions for water resources vulnerability and index development with sustainable concept are actively being made in recent years. Based on such index, water resources vulnerability of present and future is determined and diagnosed. This study calculated the water resources vulnerability rankings by 152 nations, using indicator related to water resources assessment that can be obtained from World Bank, VRI (Vulnerability Resilience Indicator), ESI (Environmental Sustainability Index). In order to quantitatively assess of water resources vulnerability based on this indicator, TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) technique was applied to index water vulnerability and to determine the rankings by nations. As a results, South Korea was ranked as the 88th among the 152 nations including Korea. Among the continents, Oceania was the least vulnerable and Afirica was the most vulnerable in continents. WUnited State, Japan, Korea and China were vulnerable in order among the major countries. Therefore, water resources vulnerability rankings by nations in this study helps us to better understand the situation of South Korea and provide the data for water resources planning and measure.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.1
• /
• pp.43-46
• /
• 2004

In genus Angelica, three species have been used and cultivated for medicinal material in orient, A. gigas in Korea, acutiloba in Japan and sinensis in China. A. gigas (Chamdangui) is different from A. acutiloba or A. sinensis in the contents chemical components and their efficacious. In Korea, in particular, A. acutiloba has been cultivated in a small acreage from several decades ago, and recently A. sinensis has been trying to cultivate. A trial of adaptation and cultivation of the three species was performed in different altitudinal regions such as Suwon (50 m of sea level), Jinbu (500 m of sea level) and Taebak (700 m of sea level). A. gigas and acutiloba grew and produced roots successfully at all locations, but A. sinensis could grow only at high altitudinal region, Taebaek. A. sinensis survived 70.3% at Taebaek, but only 45.2% at Jinbu and 3.6% at Suwon. The dry root yield of A. sinensis was as low as 1,600 kg/ha at Taebaek and 1,270 kg/ha at Jinbu comparing farmers' average root yield of A. gigas, 3,000 kg/ha however, no root could be harvested at Suwon. The results, showed it was that A. sinensis could not grow at low altitudinal plane area except high altitude area in Korea. Even though it could grow, the root yield was too low to support the income.