• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.73-79
• /
• 2011

Based on the results of Part 1 of our two-parts paper, the possibility on field applicability of CMDS(Coal Mine Drainage Sludge) mixed with bentonite and cement as a liner in landfill sites was investigated. The optimum moisture content that met the landfill liner condition was obtained when the ratio of CMDS: bentonite: cement was 1: 0.5: 0.3 in a lab-scale. The relative compaction was measured in 90.1%, which results for construction field have been generally acceptable. In this study, a large-scale Lysimeter($1.0m{\times}1.5m{\times}2.0m$) was used to simulate the effects of the layer on the freeze/thaw by -20 average temperature. The mixture after freezing/thawing showed compressive strength more than $5kg/cm^2$, which was satisfied with EPA standards. Initial permeability of CMDS was $7.10{\times}10^{-7}cm/s$ and permeability its mixture after freezing/thawing was increased to $9.80{\times}10^{-7}cm/s$. The change of temperature in the layers rises and falls with linear and temperature gradient keep maintain the present state. Moisture contents in the layers have not been radically changed. Through the leaching test determined by KSLT method, it was found that heavy metals excluding Zn and Ni were not leached out or leached out less than the standards during 7 cycles of freezing/thawing process. Since it shows the increased permeability about 1.5 times and slight change in moisture content, but it was satisfied with EPA standar through 7 cycles of freezing/thawing process, this mixture can be applied as a liner in landfill final cover system.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.122-141
• /
• 2019

This study aimed to provide new interpretations of the ceramics excavated from the archaeological site of the royal palace of Goryeo (918~1392), where only limited access was permitted due to its location in Gaeseong, North Korea. The interpretations were based on the existing understanding of the arrangement of the palace buildings at the site and historical records. The study of the general aspects of the celadons discovered during eight excavations at the Goryeo Palace site in Gaeseong revealed that most of the vessels found at the site were produced during the early and middle phases of the Goryeo dynasty. The study involved classifying the celadons bearing inscribed texts and symbols into 18 different types according to their characteristic features and periods of production. The inscribed celadons have provided detailed information of the site where they were found, thereby making it possible to make strong presumptions about the date of construction, function, and status of the building in the palace connected with the discoveries. The excavations from the Goryeo Palace site and related historical literature suggest that the celadons bearing the inscription "Sojeon (燒錢)" were used during the first half of the 13th century, although the existing view had been that they were used during the second half of the century. This new conclusion is based on the use of the symbols ${\circ}$ and ${\odot}$, the celadons found together with the Sojeon-inscribed celadons, the date of the celadons bearing the inscription "Seong (成)," and the location of their discovery behind the site of Seongyeongjeon (aka Hoegyeongjeon) Hall, which had been one of the main palace buildings. The Taoist rituals performed for the safety of the Goryeo dynasty were largely held at Ganganjeon (aka Daegwanjeon) Hall in the western part of the royal palace during the second half of the 13th century. It was mostly in the first half of the 13th century just before the transfer of the Goryeo government from Gaeseong to Ganghwa (1232~1270) that the Taoist rituals were held at the location near Seongyeongjeon Hall, where archaeologists found the Sojeon-inscribed celadons. Therefore, the large number of celadon cups with holders, including those inscribed with Sojeon, discovered during the eighth excavation of the palace site suggests that they were used for the rituals held at Seongyeongjeon Hall during the first half of the 13th century.

• Conservation Science in Museum
• /
• v.26
• /
• pp.25-34
• /
• 2021

3D printing technology has been actively applied for the restoration of cultural properties. However, its application to the restoration of glass cultural properties has not yet been reported and thus requires further study. In this study, 3D printing technology was used to restore a defective part of a glass sarira bottle that forms an element of a series of sarira reliquaries commissioned by Yi Seonggye (known as King Taejo after founding the Joseon Dynasty) that was excavated from Geumgangsan Mountain (designated as Treasure No. 1925) and is currently housed at the National Museum of Korea. The defective area was reproduced using 3D printing and the printed reproduction was reproduced again using an epoxy resin. This latter piece was used as the restoration component rather than the 3D printed element. After the completion of the conservation treatment, the materials used for the 3D printing were compared with transparent materials used to restore ceramics to evaluate their usability and stability. A total of five specimens were produced, including from photocurable resin made by a stereo lithography apparatus (SLA), epoxy resin, acrylic resin, and more. They were exposed to UV for 96 hours to test for yellowing. Of the two specimens made of photocurable resins and exposed to UV, one was sprayed with a UV blocking agent but the other was exposed as-is. The UV exposure test showed that the specimen made by the SLA and sprayed with a UV blocking agent and the specimen made of epoxy resin were stable in terms of yellowing with a change in the b-value was less than 1. They are thus considered to be suitable materials for the restoration of glass cultural properties. Such glass cultural properties are often diverse in shape and their restoration can be difficult as they generally consist of a range of complex parts that hamper restoration. In this regard, diverse materials should be considered when selecting materials for the restoration of glass cultural properties.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.827-833
• /
• 2023

CT(Computed Tomography) contrast agents are commonly used in general hospitals and university hospitals when taking radiographic examinations. The CT contrast medium contains a mixture of a substance called "Iodine", which absorbs radiation energy and makes it appear white in the CT image, further improving the image quality. In addition, the CT contrast agent, which moves like blood in the blood vessels, clearly differentiates it from muscle and water, so CT contrast agents are widely used in hospitals. These CT contrast agents absorb X-rays, but in order to absorb X-rays, they must have a high density or a high radiation absorption coefficient. Since the CT contrast agent is injected into the blood vessels, if the density is high, the blood vessels are strained and the patient is in shock. For this reason, it is necessary to match the density similar to that of water and always pay attention to side effects. In addition, the amount of CT contrast medium is adjusted according to the patient's body shape, and the remaining contrast medium is discarded. However, This study tried to find out the idea of recycling it as a radiation shielding material. Since the CT contrast medium has a high radiation absorption coefficient at a density similar to that of water, the amount to absorb radiation is adjusted, the amount of contrast medium and the amount of water are adjusted, and the amount of radiation absorbed is determined by mixing with water. In addition, a study was conducted to find out the result of the difference in radiation absorption in various ways by comparing the radiation quality coefficient and absorption coefficient with other substances or materials in an environmentally friendly method harmless to the human body by mixing CT contrast medium and water.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.84-107
• /
• 2018

Cheommojik is a pile cloth, a type of textile whose surface is covered with short piles. The term chaedam was used during the late Joseon dynasty to refer to pile cloth rugs, while the terms yoongjeon, dantong and yangtanja were used in the early twentieth century. Various documents, newspaper articles and photographs confirm that pile cloth rugs were used by the general public as well as the royal family from the late Joseon dynasty onward, and that there were domestic manufacturers of such rugs at that time. This study investigated six pile cloth rugs that were produced after the late Joseon dynasty, five of which feature Persian knots made of cut pile, the other being made with the loop pile method. The cut pile rugs are rectangular in shape and measure between 72-98cm by 150-156cm; and they are decorated in the middle with patterns of butterfly, deer, and tiger or the ten longevity symbols, and along the edges with patterns composed of 卍 symbols. The ground warp of all six rugs are made from cotton yarn, while the ground weft is made of cotton yarn on three pieces, wool on one piece and cotton and viscose rayon. The ground weft yarn from four pieces are Z-twist yarn made with two or more S-twist cotton yarn. Four to six colors were used for the pile weft, all being natural colors except for red. Two or more S- or Z-twist yarn were twisted together in the opposite twist for the pile weft, with the thickness determining the number of threads used. Six or more weft threads were used to make the start and end points of the rug; and the ground warp ends were arranged by tying every four of them together. For the left and right edges, three or more threads were wrapped together into a round stick-like form, and the second and third inner ground warps from the edges were stitched on to the wrapped edge. For the loop pile, loops were made in the direction of the warp; the ground warp and the ground weft may have been made with cotton, the pile warp with wool yarn. An analysis of the components of three rugs was conducted to determine which types of animal hair were used for the pile weft. Despite some inconclusive results, it was revealed that goat hair and fat-tailed sheep hair were used, raising the possibility that various kinds of animal fur were used in the production of pile cloth rugs. The six rugs examined in this study are estimated to have been made between the late 1800s and the early 1900s. Although the manufacturer of the rugs cannot be confirmed, we concluded that the rugs were produced in Korea after referring to the documentation of the domestic production of pile cloth rugs during the aforementioned period and the form and placements of the patterns on the rugs.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.169-177
• /
• 2020

Purpose: To assess the effectiveness of mixed grafts in lumbar posterolateral fusion (PLF) by comparing the bone union rates of an autobone with a bone substitute mixed graft. Materials and Methods: The patients were followed-up for at least two years after PLF and divided into four groups according to the mixed graft retrospectively. Group I was 48 cases using a femoral head allobone. Group II was 38 cases using β-tricalcium phosphate. Group III was 92 cases using biphasic calcium phosphate. Group IV was 38 cases using biphasic calcium phosphate and autologous bone marrow. Union was evaluated by the work up simple radiographs after two years from PLF. Union was defined if the radiographs demonstrated a bilateral continuity in the fusion mass between the cephalad and caudal transverse processes with less than 2° of angular motion and no translation between the vertebrae at the level of fusion on the lateral flexion-extension radiographs. Results: According to simple radiographs after two years from PLF, the rate of union was highest in Group IV using local autobone, biphasic calcium phosphate and autologous bone marrow mixed graft. Conclusion: Biphasic calcium phosphate is an osteoconductive bone substitute that increases the bio-absorbability and mechanical strength. Autologous bone marrow has osteoinductive and osteogenic properties. These features can increase the rate of bone union. Therefore, a local autobone, biphasic calcium phosphate and autologous bone marrow mixed graft can be considered an effective bone graft substitute for lumbar PLF instead of an autobone graft.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.31-38
• /
• 2015

At present, carbon dioxide ($CO_2$) emission, which causes global warming, is a major issue all over the world. To reduce $CO_2$ emission directly, commercial deployment of $CO_2$ separation processes has been attempted in industrial plants, such as power plant, oil refinery and steelmaking plant. Besides, several studies have been done on indirect reduction of $CO_2$ emission from recycle of reducing gas (carbon monoxide or hydrogen containing gas) in the plants. Unlike many competing gas separation technologies, pressure swing adsorption (PSA) and membrane filtration are commercially used together or individually to separate a single component from the gas mixture. However, there are few studies on operation of sequential separation process of multi-component gas which has more than two target gas products. In this paper, process simulation model is first developed for two available configurations: $CO_2$ PSA-CO PSA-$H_2$ PSA and $CO_2$ PSA-CO PSA-$H_2$ membrane. Operation optimization and economic evaluation of the processes are also performed. As a result, feed gas contains about 14% of $H_2$ should be used as fuel than separating $H_2$, and $CO_2$ separation should be separated earlier than CO separation when feed gas contains about 30% of $CO_2$ and CO. The simulation results can help us to find an optimal process configuration and operation condition for separation of multicomponent gas with $CO_2$, CO, $H_2$ and other gases.

• Journal of Life Science
• /
• v.20 no.4
• /
• pp.632-638
• /
• 2010

The genetic diversity among 48 persimmon (Diospyros kaki Thunb.) accessions, indigenous in Korea and introduced from Japan and China, was evaluated by using simple sequence repeat (SSR) markers. From 20 SSR primer sets, a total of 114 polymorphic markers were detected among 12 pollination-constant non-astringent (PCNA), 13 pollination-variant non-astringent (PVNA), 15 pollination-variant astringent (PVA), and 8 pollination-constant astringent (PCA) cultivars. Analysis of pair-wise genetic similarity coefficient (Nei-Li) and unweighted pair-group method with arithmetic averaging (UPGMA) clustering revealed two main clusters and four subclusters for cluster I. The subclustering pattern was in accordance with the classification of persimmon cultivars based on the nature of astringency loss. Phenetic relationships among the subclusters showed a closer relatedness of the PCNA group with the PVNA group, and the PVA with the PCA group. Genetic similarity co-efficiency was 0.499 on average and the highest (0.954) similarity was observed between 'Cheongdo-Bansi' and 'Haman-Bansi'. The similarity was lowest (0.192) between 'Damopan'and 'Atago'. Identification of each cultivar with the execption of 'Cheongdo-Bansi' and 'Gyeongsan-Bansi' was possible based on the SSR fingerprints, suggesting that these SSR markers are a useful tool for protecting intellectual property on newly developed cultivars.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.1-10
• /
• 2012

Along with the development of coasts, islands and mountains, the demand of long-span bridges increases which, in turn, brings forth the construction of cable-supported bridges like suspension and cable-stayed bridges. There are various types of statically indeterminate structures widely applied that supported the main girder with stay cables, main cables, hanger cables with aesthetic structural appearance. As to the cable-supported bridges, the health monitoring of a bridge can be identified by measuring tension force on cable repeatedly. The tension force on cable is measured either by direct measurement of stress of cable using load cell or hydraulic jack, or by vibration method estimating tension force using cable shape and measured dynamic characteristics. In this study, a method to estimate dynamic characteristics of hanger cables by using a digital image processing is suggested. Digital images are acquired by a portable digital camcorder, which is the sensor to remotely measure dynamic responses considering convenient and economical aspects for use. A digital image correlation(DIC) technique is applied for digital image processing, and an image transform function(ITF) to correct the geometric distortion induced from the deformed images is used to estimate subpixel. And, the correction of motion of vision-based measurement system using a fixed object in an image without installing additional sensor can be enhanced the resolution of dynamic responses and modal frequencies of hanger cables.

• Korean Journal of Agricultural Science
• /
• v.30 no.2
• /
• pp.154-163
• /
• 2003

This study was performed to examine the freezing and thawing properties of the high strength concrete using recycled coarse aggregate. The recycled coarse aggregate was replaced by 0%, 25%, 50%, 75% and 100% of natural crushed aggregate. The compressive strength of the concrete used recycled coarse aggregate was shown in more than $400kgf/cm^2$ at the curing age 28 days. The weight loss ratio by freezing and thawing was shown in less than 1% at all mix type. The pulse velocity and relative dynamic modulus were decreased with increasing the freezing and thawing cycles. Also, durability factor for the freezing and thawing were decreased with increasing the content of recycled coarse aggregate. But, recycled concrete replaced with recycled coarse aggregate 100% was shown in more than 60 by durability factor in freezing and thawing of 300cycles Accordingly, these recycled coarse aggregate can be used for high strength concrete.