• Journal of Life Science
• /
• v.18 no.7
• /
• pp.912-917
• /
• 2008

To investigate the biological activity of recombinant human granulocyte colony-stimulating factor (rec-hG-CSF) in mammalian cells, hG-CSF gene was cloned using the eDNA extracted from the human squamous carcinoma cell lines and rec-hG-CSF was produced in CHO cell lines. To analyze the biological activity in vivo, the rec-hG-CSF protein was injected into mice subcutaneously on days 0 and 2. Blood was withdrawn for white blood cell (WBC) determination 5 days after the first injection. WBC values were found to have increased significantly. A pEGFP-mUII-hG-CSF vector was transfected into somatic cell lines isolated from bovine fetal cells. The colony expressing EGFP signals was observed with a confocal microscope. These data suggest that the rec-hG-CSF produced in this study has potent activity in vivo. Thus, the results of this biological activity show that rec-hG-CSF can be enhanced considerably by genetic engineering that affects potential activity, including mutations, which add the oligosaccharide chain and construct double-fusion proteins. A pEGFP-mUII-hG-CSF vector can be utilized for the production of cloned transgenic livestock.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.11-20
• /
• 2010

This study carried out a Mock-up test to apply Low-heat Cement (CF) that is adjusted to a fineness of $3,000\;{\pm}\;200\;cm^2/g$ by substituting Coarse particle Cement (CC) and fly ash with ordinary Portland Cement (OPC), then applied it on-site. The result of the test is as follows. The Mock-up test showed that the amount of admixture in CF increased SP agent and AE agent slightly more compared to OPC, while temperature history showed that the highest temperature of CF was around $6{\sim}10^{\circ}C$ lower than that of OPC. Compressive strength in CF was low compared to that of OPC, but the strength width became narrow at the age of 28 days, which is not considered to be significant. In on-site application, slump, air content and chloride content all satisfied the target values, while the temperature history showed that the highest temperature in the center by each cast was about $34^{\circ}C$ in the first cast, $42^{\circ}C$ in the second cast, and $39^{\circ}C$ in the third cast. Compressive strength of specimen for strut management showed low value compared to standard curing, but its strength was reduced at the age of 28 days.

• Korean Journal of Food Science and Technology
• /
• v.49 no.1
• /
• pp.14-19
• /
• 2017

The objective of this study was to analyze the volatile changes occurring in retort pouches during heating using a mass spectrometry-based electronic nose. The data obtained by the electronic nose analysis was used to generate a discriminant function analysis plot. The plot showed that volatile compounds of the heated water in the retort pouch were increased by the interaction between container and water as the heating time increased. Conversely, volatile compounds of the container itself decreased when only the container was measured separately. This result means that volatile compounds from the packaging material migrated into the water. In the case of heated beef bone soup, volatile compounds were increased compared to the unheated beef bone soup after 20 min of heating. According to the results of GC/MS, nonanal and 3,5-di-tert-butyl-4-hydroxytoluene (BHT) were detected in the heated water and nonanal, heptanal, octanal, and BHT were detected in the heated beef bone soup.

• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.355-360
• /
• 2009

In this study, the arylsulfatase gene (astA, 984 bp ORF) from Pseudoalteromonas carrageenovora genome was expressed on the cell surface of S. cerevisiae by fusing with Aga2p linked to the membrane anchored protein, Aga1p. The constructed plasmid, pCTAST (7.1 kb), was introduced to S. cerevisiae EBY100 cell, and yeast transformants on YPDG plate showed the hydrolyzing activity for 4-methylumbelliferyl-sulfate and p-nitrophenyl-sulfate. When S. cerevisiae EBY100/pCTAST was grown on YPDG medium, the arylsulfatase activity of cell pellet reached about 1.2 unit/mL, whereas no extracellular arylsulfatase activity was detected. The DNA ladder in agarose prepared from agar by this recombinant arylsulfatase showed similar resolution and migration patterns with a commercial agarose. This results revealed that arylsulfatase expressed on the cell surface of S. cerevisiae could be applicable to the economic production of electrophoretic-grade agarose.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.71-76
• /
• 2018

Recently, various technologies have been developed for road facilities to reduce the load, some of which use technologies employing perforated plates for wind load reduction. Currently, there are no regulations concerning the drag coefficient of perforated plates for domestic road facilities. In the United States, the regulations regarding the drag coefficient of perforated plates in the 'Minimum design loads for buildings and other structures' were revised based on the studies of Letchford (2001) and Giannoulis (2012). In this study, a wind tunnel test was carried out to analyze the feasibility of applying regulations involving the perforated plates' drag coefficient. The results of the wind tunnel test and the drag coefficient used in the regulation were compared and analyzed. In addition, the reduction effect of the cross area of road signs calculated by applying the drag coefficient was analyzed. The results of the wind tunnel test and the value of the drag coefficient used in the regulation in the US were found to be very similar. Therefore, it was found that it is possible to apply the formula involving the drag coefficient of the perforated plate to the regulation and that the cross area of the perforated plate used for the post of the road sign is reduced by about 9.45% and that of the horizontal post by about 6.45%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.2
• /
• pp.15-29
• /
• 2020

The aims of this study is to improve physical properties of the sewage sludge and the process sludge generated in the leachate treatment by mixing the dry fuel, to develop the neutral solidifing agents that reduce oder, and to recycle the sewage and the process sludges as landfill cover materials. The mixing ratio (W/W) of sludges and dry fuel was appropriate at about 1:1, and the mixed materials were shown to be homogeneous at that ratio. We could know that when the sludges were mixed with dry fuel, moisture contents and viscosities are reduced, and air passages are formed between particles and particles. The various mixing tests and odor tests showed that the neutral solidifing agent was effective for the odor reduction. The main ingredient of the solidifing agent is the ash of sewage sludge, enabling it competitive in waste recycling and production costs. The landfill cover, using developed neutral solidification agent, improved physical properties to satisfy the quality standards and to increase the compressive strength. It also proved to reduce the value of complex oder and the usage of solidification agent to 1/3 (3,000 to 1,000) and to 1/8 (50% to 6%), respectively, from the comparative study with alkaline solidified landfill cover. Further research is under way to prove that this can be mixed with general soil to be used as a soil improvement agent for plant cultivation.

• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.140-148
• /
• 2011

The official analytical method of residue pesticides in herbal medicines by KFDA cannot be applied to all of the pesticides and herbal medicines because of various active materials in herbal medicines and various physicochemical properties of pesticides. Moreover, liquid-liquid partition uses harmful solvents such as methylene chloride and is consuming a lot of time and effort. In order to improve the problems, we have studied for the availability of the analytical method applying the macroporous diatomaceous earth (MDE) column instead of liquid-liquid partition to simultaneously analyze five pesticides in two dried herbal medicines. The results showed that the recovery rates of acetamiprid and azoxystrobin in Astragalus root by GC/ECD ranged from 89.6 to 94.1%, from 86.8 to 94.4%, respectively, and those of bifenthrin, chlorfenapyr, chlorpyrifos in Cnidii Rhizoma by GC/MS ranged from 83.6 to 88.4%, from 77.4 to 83.8%, from 82.6 to 84.3%, respectively. Also, the coefficients of variation (CV) for triplication ranged from 0.5 to 1.7%. The results satisfied the criteria of residue pesticide analysis, setting 70~120% for the recovery rate and below 10% for the coefficient of variation. The improved methods are safer to residue pesticide analysts, faster and less laborious than the KFDA official method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.604-609
• /
• 2016

This study evaluated the long-term performance of RSR (Reinforced Subgrade for Railways) technology which increases the railway line capacity without the need for additional land. Its characteristics include the use of a short reinforcement with rigid wall, which make it possible to apply it in confined spaces. The 7m high and 40m long testbed employed to evaluate the long-term performance was designed and constructed near Jupo station on the Chang-hang line. This line, located close to a local bus route, had collapsed at the subgrade following heavy rainfall. The performance of the new type of subgrade was verified with long term measurements over a 2 year period including the surface and ground settlement, horizontal displacement of the wall, tensile strain of the reinforcement, and settlement of the rail top on the side track. Based on the results of the measurements made until now, we concluded that it had sufficient safety and serviceability for use as a railway subgrade. It is expected that RSR technology could be frequently used at sites which lack the necessary construction materials for an embankment and are located close to functional railway lines and boundaries, in order to settle civil complaints.

• Journal of Plant Biotechnology
• /
• v.34 no.1
• /
• pp.55-59
• /
• 2007

The study was carried out to develop transformants resisting to Phyophthora blight disease in the domestic pepper cultivar Subicho. In transforming of syn600 promoter with elicitin gene using Agrobacterium (LBA4404/pBI101 syn600-syn${\alpha}$-elicitin) to cotyledons of pepper, rate of shoot formation in 'Subicho' was 11.1% in medium containing 3 mg/L zeatin and 0.05 mg/L NAA, and also 12.8% in medium containing combination of 4 mg/L zeatin and 0.05 mg/L MAA. For PCR reaction using elicitin gene primer of transformants regenerated from cotyledons, we detected a specific band of 536 bp, and also showed strong signal at position of 536 bp in accordance with NPTII gene used as probe in Southern blot. Transformants pepper shown resistance to blight fungus was inoculated to seedlings of the $T_{1}\;and\;T_{2}$ transformants by concentration (density: zoo spore $10^{3}/mL$).

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.332-340
• /
• 2015

Acoustic emission (AE) is an effective nondestructive test that uses transient elastic wave generated by the rapid release of energy within a material to detect any further growth or expansion of existing defects. Over the past decades, because of environmental issues, the use of compressed natural gas (CNG) as an alternative fuel for vehicles is increasing because of environmental issues. For this reason, the importance and necessity of detecting defects on a CNG fuel tank has also come to the fore. The conventional AE method used for source location is highly affected by the wave speed on the structure, and this creates problems in inspecting a composite CNG fuel tank. Because the speed and dispersion characteristics of the wave are different according to direction of structure and laminated layers. In this study, both the conventional AE method and the energy based contour map method were used for source location. This new method based on pre-acquired D/B was used for overcoming the limitation of damage localization in a composite CNG fuel tank specimen which consists of a steel liner cylinder overwrapped by GFRP. From the experimental results, it is observed that the damage localization is determined with a small error at all tested points by using the energy based contour map method, while there were a number of mis-locations or large errors at many tested points by using the conventional AE method. Therefore, the energy based contour map method used in this work is more suitable technology for inspecting composite structures.