• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.75-82
• /
• 2022

Nondestructive method to predict buckling load for the propellant tank of launch vehicle should be evaluated. Vibration correlation technique can predict the global buckling load of unstiffened cylindrical structure with geometric initial imperfection using correlation of natural frequency and compressive load from compressive test below the buckling load. In this study, vibration and buckling tests of a thin metal unstiffened propellant tank model subjected to internal pressure and compressive loads were performed and the test results were used for VCT to predict global buckling load. For the vibration test of thin structure, non-contact excitation method using a speaker was used. The response was measured with piezoelectric polymer(PVDF) sensor. Prediction results of VCT were compared with the measured buckling load in the test and the nondestructive global buckling load prediction method was verified.

• Annual Conference of KIPS
• /
• 2011.04a
• /
• pp.113-116
• /
• 2011

최근 IT 기술의 급격한 발전으로 개인정보, 환경 등 다양한 정보를 수시로 수집 및 관리하면서 사용자가 원할시 즉각적인 정보서비스를 제공하고 있다. 그러나 유 무선상의 데이터 전송은 정보의 도청, 메시지의 위 변조 및 재사용, DoS(Denial of Service)등 외부의 공격으로부터 쉽게 노출된다. 이러한 외부 공격은 개인 프라이버시를 포함한 정보서비스 시스템 전반에 치명적인 손실을 야기 시킬 수 있기 때문에 정보보호 시스템의 필요성은 갈수록 그 중요성이 부각되고 있다. 현재까지 정보보호 시스템은 소프트웨어(S/W), 하드웨어(ASIC), FPGA(Field Progr- ammable Array) 디바이스를 이용하여 구현되었으며, 각각의 구현방법은 여러 가지 문제점이 있으며 그에 따른 해결방법이 제시되고 있다. 본 논문에서는 다양한 환경에서의 정보보호 서비스를 제공하기 위한 재구성형 SoC 구조를 제안한다. 제안된 SoC는 비밀키 암호알고리즘(AES), 암호학적 해쉬(SHA-256), 공개키 암호알고리즘(ECC)을 수행 할 수 있으며, 마스터 콘트롤러에 의해 제어된다. 또한 정보보호 시스템이 요구하는 다양한 제약조건(속도, 면적, 안전성, 유연성)을 만족하기 위해 S/W, ASIC, FPGA 디바이스의 모든 장점을 최대한 활용하였으며, MCU와의 효율적인 통신을 위한 I/O 인터페이스를 제안한다. 따라서 제안된 정보보호 시스템은 기존의 시스템보다 다양한 정보보호 알고리즘을 지원할 뿐만 아니라 속도 및 면적에 있어 상충 관계를 개선하였기 때문에 저비용 응용뿐만 아니라 고속 통신 장비 시스템에도 적용이 가능하다.

• Land and Housing Review
• /
• v.14 no.2
• /
• pp.137-145
• /
• 2023

In this study, the characteristics such as flowability, bleeding rate, and strength of the CLSM (Controlled Low Strength Material) according to physical properties such as particle size distribution and particulate content of the pond ash were investigated as part of the practical development of technology for CLSM using pond ash. As a result of analyzing the properties of the collected pond ash, it was found that the density and particle size distribution characteristics were different. And that the bleeding ratio did not satisfy the standard in the case of the specimen with a large amount of fly ash and a lot of addition of mixing water. As a result of the compressive strength test, the strength development of 0.5 MPa or more for four hours was found to be satisfactory for the specimens using hemihydrate gypsum with a unit binder amount of 200 or more, and the remaining gypsum showed poor strength development. Although it was determined that landfill coal ash can be used as a CLSM material, it is necessary to identify and apply the physical and chemical characteristics of coal ash buried in the ash treatment plant of each power generation company.

• Composites Research
• /
• v.36 no.2
• /
• pp.69-79
• /
• 2023

Oil-water separation is a critical process for several industrial applications, including oil production, wastewater treatment, food processing, and environmental area such as marine oil spills. The separation efficiency of oil-water mixtures can be influenced by various factors such as mixture composition, oil and water conditions, and the separation technology used. Over the years, various technologies have been developed to separate water and oil by physical, chemical and biological methods. This paper presents an overview of the various methods and technologies available for oil-water separation, including gravity separation, centrifugal separation, and separation using adsorbents, filters. The strengths and limitations of each method are discussed, along with recent research trends and future prospects. Furthermore, this paper aims to provide direction for future research and industrial application of sustainable and environmentally friendly oil-water separation technologies. In conclusion, we provide a comprehensive overview of recent oil-water separation technologies that will be beneficial to researchers and industrialists in the field of oil-water separation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.463-463
• /
• 2022

도시하천은 급속한 경제성장과 개발 등 여건변화에 따라 크게 변화되어왔다. 이에 하천은 본연의 모습과 가치를 잃고 인공적인 모습으로 변해 하천의 주요 기능인 자정작용, 생태계 건강성 유지 등의 기능을 잃고 도시 활동에 따른 오염물질에 노출되어가고 있는 실정이다. 이로 인한 부정적인 영향으로 도시민의 삶의 질과 만족도 또한 하락되고 있다. 본 연구에서는 부산의 대표하천인 수영강을 대상으로 도시하천 수질 개선을 위한 도시민의 지불의사를 추정하였다. 비시장가치를 추정하기 위해 조건부가치측정법(CVM, Contingent Valuation Method)을 적용하여 수질개선에 따른 지불의사(WTP, Willingness To Pay)를 파악하고 경제적 가치를 추정하였다. 가상시나리오는 EPA, water quality ladder의 개념을 이용하여 현재 수영강 수질이 오염된 물(4등급)이라고 가상시장을 설정하고 낚시가 가능한 수준(2등급)까지 개선을 시키고자 할 때의 지불의사를 물었다. 이때 지불수단은 기부금의 형태로 연 1회 향후 5년간 지불기간을 설정하였다. WTP 모형추정은 KDI에서 제시하고 있는 로지스틱분포 함수와 스파이크 모형을 사용하여 WTP를 추정하였다. 스파이크 모형의 추정결과 평균 지불의사액은 12,255원으로 부산광역시 전체 가구 수인 1,392,291가구(2019년)에 적용할 경우 향후 5년간 연 170억 원의 재원을 확보할 수 있는 것으로 나타났다. 지불의사 추정결과 수영강 인접 지역주민의 지불의사가 높게 추정되었고, 부산시민이 수영강을 자연과 생태보전 기능하천으로 인지하고 있음(56.5%)을 고려 할 때, 하천환경개선을 통한 지불의사의 상승은 도시하천 가치 향상이 될 수 있을 것으로 판단된다. 또한 도시민의 기대수준 충족과 더불어 도시하천 가치상승을 위한 부족한 재원까지도 조달 할 수 있는 방안의 기초를 마련 할 수 있을 것이라 판단된다.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.490-501
• /
• 2023

Laboratory column tests were conducted to analyze infiltration and water redistribution processes on the basis of rainfall. To efficiently measure moisture content within soil layers, this research developed a predictive model grounded in a convolutional neural network (CNN), a deep learning technique. The digital images obtained during the column tests were incorporated into the established CNN. The moisture content of each soil layer over time was effectively measured. The measured values were also in relatively good agreement with the moisture content determined using the moisture sensors installed for each soil layer. The use of CNN enabled a comprehensive understanding of continuous moisture distribution within the soil layers, as well as the infiltration process according to soil texture and initial moisture content conditions.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.63-63
• /
• 2012

전자제품 패키지에 요구되는 쿠션성과 정전방전 기능을 갖는 폴리우레탄 발포 필름의 제조기술을 확립하게 되면 IT산업용에 적용 가능한 필름제품이 개발되어 ESD(정전방전, Electrostatic Dissipation) 성능을 발휘하게 됨으로서 정전기 쇼크에 의한 각종 전자제품의 오작동이나 파손 방지가 가능하게 되어 포장재, 자동차 전자제품의 하우징 등으로 사용될 수 있게 된다. 전도성 고분자인 Polyaniline (PANI)은 다른 여러 고분자와 비교하여 볼 때 다른 유형의 전도성 고분자보다 합성하기가 쉽고 높은 전기전도도를 보임은 물론 열적 및 대기 안정성이 우수하며 가격이 저렴한 장점을 가지고 있다. 본연구는 CNT 나노기술을 응용한 IT산업용 적층간지용 ESD PU발포필름의 제조 가공기술 및 상품화 개발을 수행하고자 방수, 투습방수성을 가지는 유연재료인 폴리우레탄(PU)의 1액형 PU와 DMF에 PANI의 함량을 5, 10, 15, 20, 25, 30wt%로 변화시켜 제조한 PANI/DMF 분산용액과 IPA/MWNT 3wt% 분산용액의 혼용비에 변화를 주어 $120^{\circ}C$에서 2분 건조시켜 그라운드 필름을 제조하였다. 그리고 2액형 PU와 IPA/MWNT 3wt% 분산용액과 발포제를 사용하여 발포온도 $150^{\circ}C$에서 5분간 건조시켜 발포필름을 제조하였으며 이들의 전기적 특성과 역학적 특성을 조사하였다. 제조된 필름의 전기전도성은 전기저항측정기 KEITHLEY 8009를 사용하여 부피저항과, 표면저항을 각각 측정하여 확인하였으며, 필름의 마찰 대전압은 E.S.T-7 마찰 대전압 시험기를 이용하여 표면 마찰 대전압을 측정하여 확인하고, 필름의 물리적 특성은 인장시험기를 이용하여 breaking stress, breaking strain을 측정하였다. 필름단면의 CNT 발포특성은 주사전자현미경(SEM)을 사용하여 측정하여 발포특성과 물성과의 연관성을 확인하였다. 그 결과 필름의 전기적 특성은 PANI가 30% 함량일 때 전반적으로 낮은 저항값이 측정되었으며, 마찰대전압을 측정한 결과 대부분의 시료가 0에 가까운 낮은 값을 가졌다. 필름의 물리적 인장특성은 PANI가 10wt%의 함량일 때 가장 높은 절단강도를 가졌으며 분산용액의 혼용비에 따른 경향성은 나타나지 않았다. 필름의 단면형상을 확인하여 발포특성을 분석한 결과 PANI의 함량에 따라 발포 cell의 크기는 뚜렷한 경향성을 보이지 않았으나 30wt%의 PANI/DMF 분산용액 20part(gr)와 3wt% IPA/MWNT 분산용액 40part(gr)로 제조한 시료의 cell이 가장 균일하고 고르게 발포되었으며, 3.90E+06ohm으로 가장 낮은 표면저항 값으로 측정되어 가장 좋은 전기전도성을 가짐을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.56-65
• /
• 2009

Stereoscopic images consist of the left image and the right image. Thus, stereoscopic images have much amounts of data than single image. Then an efficient image compression technique is needed, the DPCM-based predicted coding compression technique is used in most video coding standards. Motion and disparity estimation are needed to realize the predicted coding compression technique. Their performing algorithm is block matching algorithm used in most video coding standards. Full search algorithm is a base algorithm of block matching algorithm which finds an optimal block to compare the base block with every other block in the search area. This algorithm presents the best efficiency for finding optimal blocks, but it has very large computational loads. In this paper, we have proposed fast disparity estimation algorithm using motion and disparity vector information of the prior frame in stereo image coding. We can realize fast disparity vector estimation in order to reduce search area by taking advantage of global disparity vector and to decrease computational loads by limiting search points using motion vectors and disparity vectors of prior frame. Experimental results show that the proposed algorithm has better performance in the simple image sequence than complex image sequence. We conclude that the fast disparity vector estimation is possible in simple image sequences by reducing computational complexities.

• Journal of the Korean Society of Radiology
• /
• v.17 no.5
• /
• pp.671-677
• /
• 2023

When a scintillator block is constructed using fine scintillator pixels, the scintillator block located at the edge of the scintillator block results in overlapping images. To solve this problem, a light guide was inserted between the scintillator block and the photosensor, and images of all scintillation pixels were separated and acquired. However, loss of light may occur through the light guide, which eventually affects the quality of the image due to a decrease in energy resolution. Therefore, in this study, a detector was designed that can separate scintilltion pixels better by using a reflector on the side of the light guide and can secre excellent energy resolution by minimizing light loss. For comparative evaluation with previous studies, flood images were obtained through DETECT2000 capable of light simulation, and the degree of separation and light collection rate were evaluated. When a reflector was used on the side of the light guide, all materials showed excellent separation regardless of the material of the light guide, which showed better separation results than previous studies. In addition, the light collection rate was more that five times better when the reflector was applied than when it wa not. If this detector is applied to a small animal positron emission tomography, it will be possilbe to secre excellent image quality through excellent spatial resolution and energy resolution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3562-3569
• /
• 2013

The performance of concrete structure decreases with change in time and the external environment. In order to reinforce the structure, the research about new material development and application of newly developed materials are widely conducted. In the case of composite FRP, it received good attention in the academia due to its high intensity-weight ratio, excellent corrosion resistency as well as good workability. When applying at the construction field, however, the utilization of FRP did not increase as much due to lack of reliability and design standard. Current study investigated the material characteristics during the temperature change at high temperature and the structural behavior from restraint effect for GFRP reinforcing materials. Two experimental variables were set in this study: GFRP reinforcements due to tensile properties of temperature and restraint compression effects. Three concrete specimen were selected for each set temperatures. For this reason, as a variable to experiment with the effects confined compression concrete members value and tensile properties with temperature reinforcement GFRP, experiment produced three pieces each for each set temperature, the concrete specimen, which is confined in the GFRP was selected each I did. For the temperature change during the experiment, the concrete specimen were mounted in order to expose to experimental high temperature for certain period of time. For compression performance evaluation, reinforcement effect from horizontal constraint of the fiber were measured using an Universal Material Testing Machine (UTM). Finally, this study revealed that the binding characteristics of GFRP materials from temperature change decreased. Also, this study showed that the maximum compression intensity decreased as the temperature increased up to $150^{\circ}C$ in the constraints ability of the GFRP reinforcements during the horizontal constraint of concrete.