• Journal of the Korean Geosynthetics Society
• /
• v.12 no.1
• /
• pp.101-107
• /
• 2013

Environmental-friendly and economical construction are the recent issues for civil structures and soilbag as facing wall is widely used for cut-slope remediation projects. However, the stability of structures is an important issue for the use of environmental-friendly and economical materials. In order to understand the stability of soilbag reinforced retaining wall, tensile resistance, rupture, tensile strength, and internal/external safety factor of the wall were analyzed with MSEW program and the results were compared to the safety factor of block-type reinforced walls. The stability of retaining wall was analyzed with reduction coefficients of connection strength to check the connection stability. Because it is possible to move between soilbag and geogrid connector for soilbag retaining wall, the safety factor of the wall was analyzed with different inclination angles of soilbag. The analysis result shows that the connection strength and internal/external stability of soilbag reinforced wall satisfy the stability criteria.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.385-392
• /
• 2006

It is widely accepted that high user densities in mobile multimedia environments can only be achieved with micro- and pico-cell. The smaller cell size causes frequent handovers between cells, and decreases permissible handover processing delay. This may result in the handover failure, in addition to the loss of some packets during the handover. In these cases, re-transmission is needed in order to compensate errors, which in turn triggers a rapid degradation of throughput. In this paper, we propose a new handover scheme for the next generation mobile communication systems, in which the handover setup process is done in advance before a handover request by predicting the handover cell based on mobile terminal's current position and moving direction. Simulation is performed in order to analyze the handover failure rate and packet loss rate. Simulation results show that our proposed method provides a better performance than the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.450-458
• /
• 2008

In this paper, we propose a real-time stereoscopic display system based on H.264/AVC. We initially acquire stereo-view images from stereo web-cam using OpenCV library. The captured images are converted to YUV 4:2:0 format as a preprocess. The input files are encoded by stereo-encoder, which has a proposed estimation structure, with more than 30 fps. The encoded bitstream are decoded by stereo-decoder reconstructing left and right images. The reconstructed stereo images are postprocessed by stereoscopic image synthesis technique to offer users more realistic images with 3D effect. Experimental results show that the proposed system has better encoding efficiency compared with using a conventional stereo CODEC(coder and decoder) and operates with real-time processing and low complexity suitable for an application with a mobile environment.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.43-49
• /
• 2004

SIP Caller Preference is an useful function that allows a caller to express preferences about request handling in servers. It can also feat appropriate call processing according to the callee capabilities. However, only the category of the media is considered as a criteria for target selection in the caller preference. In this case, if the callee's media information such as codec is different from the caller, an additional re­negotiation occurs for SIP call setup. Therefore, in this paper, we have suggested an extended caller preference to solve this problem. In our SIP based VoIP system, a network sewer uses detailed media informations for media stream in the session to select the target for SIP call setup. The sewer gives higher priority to the candidate which do not require re-negotiation for call setup, so that an effective call setup can be achieved in our system.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.625-634
• /
• 2004

When constructing a component based system, It is understood that identifying reusable and independent business components is of utmost importance. However, according to conventional component based developing methodologies, most of developers depend on their experience and/or intuition for identification of business components. Furthermore, there are no criteria to evaluate whether the identified business components are more independently defined or not. Therefore, we propose a component identification metrics to apply to component properties In order to complement the difficulties of identifying business components through developers' experience and/or intuition. The metrics defined are the criteria for identifying the business Components and/or for evaluating the Identified components. We propose both a cohesion metric, and a coupling metric, to which component properties are applied, wherein those properties can be understood by high cohesion in, and low coupling between, components. Moreover, we propose an independence metric that can evaluate the degree of independence for a particular component by ratio of the cohesion and coupling of components. The metrics that we propose are applied to case study which demonstrates the identification of more independent business components and the validity of our metrics.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.120-130
• /
• 2013

A study was conducted for the performance characteristics of methane taking recently the limelight in the world as a next-generation propellant, with the survey for state of the art in the development of methane/oxygen rocket engine being accompanied. Liquid methane as a rocket fuel has the favorable characteristics such as non-toxic, low cost, regenerative cooling capability, and potential for in-situ resource utilization (ISRU). The combination of liquid methane and liquid oxygen also provides the excellent performance including high specific impulse and low system mass. For these reasons, many researches have been actively carried out on the methane/oxygen engine, nevertheless, its technology readiness level is not that high enough just yet. Therefore, it is judged that it is the time to mitigate the technical gap with the space technology of advanced countries through a swift onset of the development of methane rocket engine.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.13-18
• /
• 2010

This study was made on the fact that the environmental impact and durability of the recently developed alkali silicasol chemical grout material. The grout material used for this study was designed to understand its environmental impact and durability through the SEM, chemical resistance test, leaching test, permeability test. In order to compare with the engineering characteristics regarding alkali silicasol grout material and sodium silicate grout material. As a result of SEM, the surface and internal tissues of alkali silicasol grout material could be identified to be denser than those of sodium silicate. As a result of leaching test the adaptability was identified as grout material as it had proved to be an ecological material owing to the total amount of the element to be leached being extremely little. As a result of permeability test it is judged that it is possible to apply the silicasol to the site in the place requiring the water cut-off as the silicasol.

• Journal of KIISE:Software and Applications
• /
• v.33 no.3
• /
• pp.301-315
• /
• 2006

In component-based system, the qualities of components as reusable units are the most important to success the component-based development. Therefore, before software implementation phase, the designed components should be measurable to improve the qualities of the components and the measured results should be reflected in the component-based development phase. In addition, the qualities of the components should be measured accurately. Accordingly, this paper proposes cohesion and coupling metrics applying static and dynamic dependency characteristics by the interdependence between classes. We prove the theoretical soundness of the proposed metrics by the axiom of briand et al. A case study and a comparison with the conventional metrics verify the practicality of the proposed metrics. The development times and endeavors to design the components is reduced, because the proposed metrics measure the qualities of components accurately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.3
• /
• pp.435-440
• /
• 2020

The application of the unmanned vehicles in various fields has been attracting attention, and the development of a service utilizing unmanned vehicles has been proceeding. As the service market using the unmanned vehicles rapidly increases, the demand for the development of software for performing the mission with unmanned vehicles is increasing. In particular, as the demand for unmanned vehicle utilization services for public missions such as fire detection, mail delivery, and facility management increases, the importance of developing mission software for unmanned vehicle is increasing. To develop common mission software, architecture design should be made so that unmanned vehicle service provider can easily develop software using reusable libraries or functions through analysis commonly required by various public institutions. In this paper, we discuss the research trends of mission software for public mission unmanned vehicles. In addition, the architecture design of developing formal mission software is proposed. Finally, we propose a data transfer architecture between mission software and data platform.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.1
• /
• pp.79-89
• /
• 2004

Mobile IP Low Latency Handoffs allow greater support for real-time services on a Mobile W network by minimizing the period of time when a mobile node is unable to send or receive IP packets due to the delay in the Mobile IP Registration process. However, on Mobile IP network with AAA servers that are capable of performing Authentication, Authorization, and Accounting(AAA) services, every Registration has to be traversed to the home network to achieve new session keys, that are distributed by home AAA server, for a new Mobile IP session. This communication delay is the time taken to re-authenticate the mobile node and to traverse between foreign and home network even if the mobile node has been previously authorized to old foreign agent. In order to reduce these extra time overheads, we present a method that performs Low Latency Handoffs without requiring funker involvement by home AAA server. The method re-uses the previously assigned session keys. To provide confidentiality and integrity of session keys in the phase of key exchange between agents, it uses a key sharing method by gateway foreign agent that Performs a ousted thirty party. The Proposed method allows the mobile node to perform Low Latency Handoffs with fast as well as secure operation