• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.72-80
• /
• 2009

In this parer, we propose a hardware abstraction architecture(HAA) for low cost flash memories that can be applicable to wireless sensor nodes. The proposed HAA consists of three layers. The three layers are 1) HHL(Hardware Interlace Layer), HAL(Hardware Adaption Layer), and HPL(Hardware Presentation Layer), where HIL provides a platform independent interlace to applications of upper layers, HAL performs hardware resource management, program status control, and generation of logical instructions as main core of the HAA, and HPL initializes hardware and communicates data between MCU and flash memory. We implemented our HAA on AT45DB flash memory, and the HAA used 4,384 bytes program memory and 195 bytes data memory respectively. Since the proposed HAA is composed of well defined three layers and shows a low utilization of memory, it can provides a high efficiency in terms of flexibility, scalability, and re-usability, and thus the HAA is well suited for wireless sensor nodes.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.105-112
• /
• 2005

Stabilizing and rousing sludge water generated from washing truck mixer and batcher plant can resolve inconsistency in quality and improve strength, therefore it is essential to review how to utilize it. This research conducted experiments and studied on solids of sludge water to find out the types of stabilizing agents available in conditions of producing ready mixed concretes in Korea. The result showed that oxy carboxylic acid retarder dedicated for stabilizing sludge water was most effective in decreasing solid. However, the setting time of cement paste was retarded due to surplus reactants, but it did not impede application of ready mixed concretes. When we left the sludge water mixed with stabilizing agent, it has been noted that initial retard effect recovered to the level using just service water in 7${\~}$8 days and that it is effective to use stabilized sludge water in 2${\~}$3 days. On the other hand, saccharic type super retarding agent was also outstanding in applicability by showing similar effect. The sludge water stabilizing agents currently marketed depend on imports, therefore it is necessary to locally manufacture usable stabilizing agents and to review its usability with multi-dimensional view.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4214-4223
• /
• 2012

The argument related to the use of real and anonymous names on the Internet bulletin board has recently become a main issue. When using real names, it is possible to violate free discussion and privacy. Also, when using anonymous names, it is possible to have the reverse function of the Internet in regard to the use of malicious replies or the distribution of false ideas. Therefore, this paper has made it possible to prevent the spread of the user's personal information and execute the single log-in process by using the XML-token method which is one of the SSO technologies. Also, by issuing virtual IDs and forming the path when establishing tokens, the anonymous bulletin board which provides anonymity with a conditional tracing process has been suggested. After analyzing the performance of visitor numbers at authentication time, the anonymous bulletin board based on the group signature method showed the average response rate of 0.72 seconds, 0.18 seconds, which was suggested scheme. In the authentication time 4-5 times faster response speed, respectively. Also, since the suggested system does not have to provide a single authentication process or make the user provide his or her signature, the level of user's convenience seems to be much higher. Such a result shows that the system suggested on the anonymous bulletin board has a more appropriate level of user's convenience.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.333-341
• /
• 2017

The Korea Atomic Energy Research Institute (KAERI) constructed the PyRoprocessing Integrated inactive Demonstration facility (PRIDE) to carry out experiments on engineering scale pyroprocessing. PRIDE has a large processing cell that human workers are not allowed to access, and thus the equipment inside is operated from outside using remote handling systems. It is therefore essential to examine the operability and maintainability of the equipment in view of remote handling systems, and the equipment is thoroughly examined in a mockup cell before it is installed in the processing cell. If the equipment is tested in a virtual mockup rather than in a mockup cell, the development cost can be significantly reduced. The PRIDE 3D simulator was integrated for virtual verification of equipment that will be installed in the processing cell. All remote handling devices in the actual PRIDE were also virtually installed in the PRIDE 3D simulator. The 3D model of the equipment was loaded and located in the exact position in the virtual processing cell. A scenario to replace an actual electrode was implemented in the PRIDE 3D simulator. The design of the equipment and the working procedures in the scenario were successfully evaluated. The results demonstrated that the PRIDE 3D simulator can be used successfully as an alternative to actual mockup testing.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.431-440
• /
• 2011

The thermal expansion coefficient of epoxy/inorganic additives composites was controlled by changing the amount of the inorganic additives such as talc and fused silica. The epoxy resin comprises hydrogenated bisphenol A (HBA)-based epoxide, difunctional polyglycidyl epoxide (DPE) as a diluent and isophorone-diamine (IPDA) as a crosslinking agent, which was subsequently mixed with inorganic additives (talc and fused silica). The thermal expansion coefficient was decreased by increasing amount of inorganic additives, nearly to fresh granite. Fused silica was more effective than talc in lowering the thermal expansion coefficient. Additionally, lexural and tensile strengths of the composites were getting lower and higher with the amount of the inorganic fillers, respectively. It was thus concluded that an epoxy composite containing inorganic fillers was developed to show much lower thermal expansion coefficient, similar to fresh granite, than the neat epoxy resin, and also proper mechanical strengths for applications.

• Journal of Conservation Science
• /
• v.29 no.2
• /
• pp.161-170
• /
• 2013

The purpose of this study is to find the reasonable plan for the restoration method through the practical repair of excavated costume. The minimal repair only without adding the physical force as far as possible after investigating the state of excavated costume has been progressed in case of excavated costume since it is already degraded and weak due to the characteristics of organic matter at the moment when it is excavated. Moreover, it has been restored as the following course; The restoration has been applied according to the state of excavated costume with the maximum stability by classifying items capable of being restored considering the fabric state of excavated costume. The drawn thread from the weak in strength and the refined thread of the Juasa(simple gauze) or the light degraded silk thread has been used in case of thread for restoration. The cotton fabrics has been used in the fabric of cellulose system, the Juasa or the silk has been used in the silk depending on the kind of fabric in connection with the support fabric, some parts have been dyed with Alnus firma fruit and the persimmon, has been repaired by using the dyed fabric with the clove for the purpose of mothproof-antibacterial treatment. The method to repair has been carried out by classifying according to the state of damage and the way of formation of costume. The needlework method suitable for the part and state of damage by using the basting, the broad-stitching, backstitch, the blind stitch and the hemming stitch in connection with the needlework method for restoration.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.2
• /
• pp.13-21
• /
• 2020

In Korea, small reservoirs have been constructed for the supply of agricultural water, but most of them have been over 50 years from the year of construction. Aging agricultural reservoirs are being investigated for serious defects such as leaks and movements in slope, which are very vulnerable to safety. Accordingly, grouting methods are used to reinforce aging agricultural reservoirs in Korea. However, cement used as a grouting injection material consumes natural resources and generates a large amount of greenhouse gases during production. In addition, there is a problem that sufficient reinforcement is not made due to various factors such as the injection amount, the compounding ratio, the injection pressure, and etc. Therefore, due to these problems, the development of new materials and methods that can replace the grouting method and cement is required. In order to solve these problems, this study conducted an laboratory test on the surface stabilizer used to secure the stability of road and rail slopes. In addition, the program was analyzed and the reinforcing effect was examined when the surface stabilizer was used as reinforcement material for aging agricultural reservoir. As a result of the laboratory test, when the surface stabilizer is mixed, the increase of cohesion is possible up to 9% and there is no change in the friction angle. The results of the program analysis showed that the 1.0m reinforcement of slopes increased the factor of safety by 1.4 times, making it possible to reinforce the aging agricultural reservoir using surface stabilizers. And as a reinforcement method, it was analyzed that it is most appropriate to reinforce the slope and the bottom of slope simultaneously.

• 보존과학연구
• /
• s.33
• /
• pp.125-148
• /
• 2012

The Octagonal nine storied pagoda of Woljeongsa Temple consists mainly of granite with the rockforming minerals quartz, plagioclase, microcline, and biotite. The surface of the stone stupa is light brown that has been discolored by the rust from the metal ornament and aids. The surface of the stylobate and roof stone is colonized by biological contaminants. Therefore, a comprehensive deterioration diagnosis was carried out in this study, and conservation treatment was conducted. It was proven that the $Fe^{2+}$ yield increases depending on the count of poultice used with oxalic acid, but the $Mg^{2+}$, $Al^{3+}$, and $Ca^{2+}$ yields were marginal following the preliminary test. Therefore, the use of poultice is an effective way of removing the rust, and only marginally influences the rock. The biological contaminants were removed through dry cleaning, and the soil located under the contaminants was removed through wet cleaning. Based on this, the dry and wet cleaning of all the biological contaminants, and the use of poultice with oxalic acid, were done to remove the rust. For the conservation treatment of the metal ornament, the rust was removed through physical cleaning, and anticorrosion treatment was performed on the iron ornament using Renaissance wax and copper ornament by BTA.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.115-124
• /
• 2013

In this paper, we suggest a secure data dissemination by Lightweight Individual Encryption Multicast scheme over wireless sensor networks using the individual encryption method with Forward Error Correction instead of the group key encryption method. In wireless sensor networks, a sink node disseminates multicast data to the number of sensor nodes to update the up to date software such as network re-programming and here the group key encryption method is the general approach to provide a secure transmission. This group key encryption approach involves re-key management to provide a strong secure content distribution, however it is complicated to provide group key management services in wireless sensor networks due to limited resources of computing, storage, and communication. Although it is possible to control an individual node, the cost problem about individual encryption comes up and the individual encryption method is difficult to apply in multicast data transmission on wireless sensor networks. Therefore we only use 0.16% of individually encrypted packets to securely transmit data with the unicast to every node and the rest 99.84% non-encrypted encoded packets is transmitted with the multicast for network performance.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.330-337
• /
• 2021

3D printing is not only at the fundamental study and small-scale level, but has recently been producing buildings that can be inhabited by people. Buildings require a lot of cost and labor to work on the form work, but if 3D printing is applied to the building, the construction industry is received attention from technologies using 3D printing as it can reduce the construction period and cost. 3D printing technology for buildings can be divided into structural and non-structural materials, of which 3D printing is applied to non-structural materials. Because 3D printing needs to be additive manufacturing, control such as curing speed and workability is needed. Since cement mortar has a large shrinkage due to evaporation of water, cement polymer dispersion is used to improve the hardening speed, workability, and adhesion strength. The addition of polymer dispersion to cement mortar improves the tensile strength and brittleness between the cement hydrate and the polymer film. Cement mortar using polymer materials can be additive manufacturing but it has limited height that can be additive manufacturing due to its high density. When light-weight materials are mixed with polymer cement mortar, the density of polymer cement mortar is lowered and the height of additive manufacturing, so it is essential to use light-weight materials. However, the use of EVA redispersible polymer powder and light-weight materials, additional damage such as cracks in cement mortar can occur at high temperatures such as fires. This study produced a test specimen incorporating light-weight materials and EVA redispersible polymer powder to produce exterior building materials using 3D printing, and examined flame resistance performance through water absorption rate, length change rate, and cone calorimeter test and non-flammable test. From the test result, the test specimen using silica sand and light-weight aggregate showed good flame resistance performance, and if the EVA redispersible polymer powder is applied below 5%, it shows good flame resistance performance.