• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.330-332
• /
• 2013

소 분위기에서 플라즈마 표면 처리의 경우 기판 표면에 존재하는 수소와 탄소 유기물들이 산소와 반응하여 $H_2O$와 $CO_2$ 등으로 제거되며 표면에 오존 결합을 유도하여 표면 에너지를 증가시키는 것으로 알려져 있다. ZnO 나노구조물을 성장시키는 방법으로는 MOCVD (Metal-Organic Chemical Vapor Deposited), PLD (Pulsed Laser Deposition), VLS (Vapor-Liquid-Solid), Sputtering, 습식화학합성법(Wet Chemical Method) 방법 등이 있다. 그중에서도 습식화학합성법은 쉽게 구성요소를 제어할 수 있고, 저비용 공정과 낮은 온도에서 성장 가능하며 플렉서블 소자에도 적용이 가능하다. 그러므로 본 연구에서는 플라즈마 표면처리에 따라 표면에너지를 변화하여 습식화학합성법으로 성장시킨 ZnO nanorods의 밀도를 제어하고 photolithography 공정 없이 패터닝 가능성을 유 무를 판단하는 연구를 진행하였다. 기판은 Si wafer (100)를 사용하였으며 세척 후 표면에너지 증가를 위한 플라즈마 표면처리를 실시하였다. 분위기 가스는 Ar/$O_2$를 사용하였으며 입력전압 400 W에서 0, 5, 10, 15, 60초 동안 각각 실시하였다. ZnO nanorods의 seed layer를 도포하기 위하여 Zinc acetate dehydrate [Zn $(CH_3COO)_2{\cdot}2H_2O$, 0.03 M]를 ethanol 50 ml에 용해시킨 후 스핀코팅기를 이용하여 850 RPM, 15초로 5회 실시하였으며 $80^{\circ}C$에서 5분간 건조하였다. ZnO rods의 성장은 Zinc nitrate hexahydrate [$Zn(NO_3)_2{\cdot}6H_2O$, 0.025M], HMT [$C6H_{12}N_4$, 0.025M]를 deionized water 250 ml에 용해시켜 hotplate에 올리고 $300^{\circ}C$에서 녹인 후 $200^{\circ}C$에서 3시간 성장시켰다. ZnO nanorods의 성장 공정은(Fig. 1)과 같다. 먼저 플라즈마 처리한 시편의 표면에너지 측정을 위해 접촉각 측정 장치[KRUSS, DSA100]를 이용하였다. 그 결과 0, 5, 10, 15, 60 초로 플라즈마 표면 처리했던 시편이 각각 Fig. l, 2와 같이 $79^{\circ}$, $43^{\circ}$, $11^{\circ}$, $6^{\circ}$, $7.8^{\circ}$로 측정되었으며 이것을 각각 습식화학합성법으로 ZnO nanorods를 성장 시켰을 때 Fig. 3과 같이 밀도 차이를 확인할 수 있었다. 이러한 결과를 바탕으로 기판의 표면에너지를 제어하여 Fig. 4와 같이 나타나며 photolithography 공정없이 ZnO nanorods를 패터닝을 할 수 있었다. 본 연구에서는 플라즈마 표면 처리를 통하여 표면에너지의 변화를 제어함으로써 ZnO nanorods 성장의 밀도 차이를 나타냈었다. 이러한 저비용, 저온 공정으로 $O_2$, CO, $H_2$, $H_2O$와 같은 다양한 화학종에 반응하는 ZnO를 이용한 플렉시블 화학센서에 응용 및 사용될 수 있고, 플렉시블 디스플레이 및 3D 디스플레이 소자에 활용 가능하다.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.272-281
• /
• 2008

A layer channel, which can express effects on 3D image, is inserted to use it on application rendering effectively. The current method of effect rendering requires individual sources in storage and image processing, because it uses individual and mixed management of images and effects. However, we can save costs and improve results in images processing by processing both image and layer channels together. By changing image format to insert a layer channel in image and adding a hide function to conceal the layer channel and control to make it possible to approach image and layer channels simultaneously during loading image and techniques hiding the layer channel by changing image format with simple techniques, like alpha blending, etc., it is developed to improve reusability and be able to be used in all programs by combining the layer channel and image together, so that images in changed format can be viewed in general image viewers. With the configuration, we can improve processing speed by introducing image and layer channels simultaneously during loading images, and reduce the size of source storage space for layer channel images by inserting a layer channel in 3D images. Also, it allows managing images in 3D image and layer channels simultaneously, enabling effective expressions, and we can expect to use it effectively in multimedia image used in practical applications.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.26-37
• /
• 2012

Recently, the demand and supply on the Hanok have been increased. However, Hanok should be requested larger section of structural members because of excessive roof weight. So, structural skin-timber was manufactured to get a lightweight structural member. The structural skin-timber has exterior shape with larger section but a great volume of wood be removed. The reduced strength of structural skin-timber can be supplemented by hybridizaion of structural member. Japanese larch and Domestic pine were used to manufacture the structural skin-timber. Structural skin-timbers of rectangular shape and cylinder shape were manufactured and tested to evaluate the bending properties. The intended strength property could not be obtained because member had been suffered severe damage by precision deficiency of manufacturing machine. However, if precision of manufacturing machine would be improved and additional hybridizaion of structural skin-timber would be done, lightweight structural member will be able to be manufactured. Structural skin-timber did not showed statistical significancy between two species, so it is possible to use pine mixed with larch. Only MOR of larch showed statistical significancy between rectangular shape and cylinder shape, so it is necessary to use of those as separate things. However, the rest of skin-timber can be judged mixed using because of non statistical significancy. The objective of this study was the development of lightweight larger structural member with relatively strength. If hybrid member of skin-timber could be developed with wood-ceramics, lightweight steel and more, it can be possible to be used as a building material of Hanok, interior material, post & beam construction material and more.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.1035-1043
• /
• 2007

A leachate containing an elevated concentration of organic and inorganic compounds has the potential to contaminate adjacent soils and groundwater as well as downgradient areas of the watershed. Moreover high-strength ammonium concentrations in leachate can be toxic to aquatic ecological systems as well as consuming dissolved oxygen, due to ammonium oxidation, and thereby causing eutrophication of the watershed. In response to these concerns landfill stabilization and leachate treatment are required to reduce contaminant loading sand minimize effects on the environment. Compared with other treatment technologies, leachate recirculation technology is most effective for the pre-treatment of leachate and the acceleration of waste stabilization processes in a landfill. However, leachate recirculation that accelerates the decomposition of readily degradable organic matter might also be generating high-strength ammonium in the leachate. Since most landfill leachate having high concentrations of nitrogen also contain insufficient quantities of the organic carbon required for complete denitrification, we combined a shortcut biological nitrogen removal (SBNR) technology in order to solve the problem associated with the inability to denitrify the oxidized ammonium due to the lack of carbon sources. The accumulation of nitrite was successfully achieved at a 0.8 ratio of $NO_2^{-}-N/NO_x-N$ in an on-site reactor of the sequencing batch reactor (SBR) type that had operated for six hours in an aeration phase. The $NO_x$-N ratio in leachate produced following SBR treatment was reduced in the landfill and the denitrification mechanism is implied sulfur-based autotrophic denitrification and/or heterotrophic denitrification. The combined leachate recirculation with SBNR proved an effective technology for landfill stabilization and nitrogen removal in leachate.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.47-53
• /
• 2011

Purpose: As the number of the anterior cruciate ligament (ACL) reconstruction has increased, the incidence of revision of ACL reconstruction due to reconstruction failure has been also increased. Therefore, authors analyzed the reason of the failure of ACL reconstruction and the clinical result of the ACL revision. Materials and methods: From February 1998 to July 2010, we selected 36 cases which was followed at least 12months after the ACL reconstruction failure. Duration from reconstruction to revision, the average duration was 60 months (5~334) and on first reconstruction, we used allograft on 23 cases (63.9%) and autograft on 13 cases (36.1%). For the main symptom of ACL reconstruction failure, instability was the most common symptom, and 35 cases (97.5%) were undergone only one reconstruction and 1case (2.5%) was undergone two reconstruction. Clinical results were evaluated by Lysholm knee joint score, pivot shift test, and Telos device. Results: Average follow-up duration of the patients was 21 months (12~40), and the reason for the ACL reconstruction failure, trauma was most common by 19 cases (52.8%), malposition of the femoral tunnel was 13 cases (36.1%), malposition of the tibia tunnel was 1case (2.8%), and failure of osteointegration was 3 cases (8.4%). On performing the ACL revision, we used allograft on 34 cases (94%) and autograft on 2 cases (6%), and 21 cases accompanied injury of the meniscus (medial meniscus 14 cases, lateral meniscus 7 cases). Lysholm knee joint score was improved from 66.5 points, preoperatively to 92 points on last follow-up (p<0.01). In most cases, patients were satisfied (92%) with the operation results. Tegner activity score was also improved from 2.0 points preoperatively to 6.2 points on the last follow-up. On Lachman and pivot sift test, 33 cases and 30 cases were improved to grade I respectively, and on stability test using Telos device, the bilateral difference was improved from mean 15.5 mm preoperatively to 4.5 mm on the last follow-up. Conclusion: After 1 year follow-up, Revision of ACL had a little anterior instability but it showed satisfactory result on clinical result and patient's subjective satisfaction.

• Journal of Energy Engineering
• /
• v.17 no.3
• /
• pp.145-152
• /
• 2008

Approaching to the era of high energy price and energy sources scarcity, the demand for governmental intervention to mitigate the short-term shocks is highly increasing. When any energy policy is implemented, double-side effects would be derived. To begin with positive aspect, by decreasing energy import, unnecessary currency outflow can be prevented and the resultant saved money will be appropriately allocated. Furthermore, industrial competitiveness will be assured by reducing use of expensive energy. On the contrary, inappropriate energy saving policy may lead to unexpected negative effects that would hinder improvement in productivity due to indiscreet replacing energy by equipments. In order to enhance effectiveness of energy policy, efforts should be made in advance to understand the energy use pattern of each industry sector which composes the economy. Therefore, in this study, an energy input-output method, one of the macroscopic approaches, is applied to analyze energy use patterns of each industry sector in Korea. Using this method, a quantitative assessment is performed to obtain the energy use intensity and the amount of energy uses with respect to energy types.

• Journal of KIISE
• /
• v.43 no.5
• /
• pp.569-578
• /
• 2016

The PLC (Programmable Logic Controller) has been widely used for the development of digital control system of nuclear power plant. The PLC has high maintenance costs and increasing complexity, hence, FPGA (Field Programmable Gate Array) based digital control system has been considered as an alternative. However, the development of FPGA based digital control system is a challenge for PLC engineers because they are required to learn about new language to develop FPGA and knowledge and know-how acquired in the development of PLC is not transferable. In this study, we proposed and implemented an automatic translation tool for translation of FBD (Function Block Diagram), a programming language of PLC software, into VHDL (VHSIC Hardware Description Language). Automatically translating the FBD to VHDL using this tool allows PLC engineers to develop FPGA without any knowledge of the hardware description language.

• Journal of Korea Game Society
• /
• v.9 no.2
• /
• pp.29-39
• /
• 2009

Game scenarios are playing more important role as much as games are getting more sophisticated and expanded in their applications. However, general-purpose tools for production of game scenarios are still not developed. There are similar tools for the production of films or dramas and simple tools for the development of UCG. However, analysis about them shows that they are not suitable for the production of game scenarios. In this paper, we are to develop game scenario authoring tool called 'UMa' suitable for game production and easy to use. UMa is composed of synopsis entry, quest entry, DB entry, communication, display, and control component. Since UMa provides templates to make synopsis, quest, and DB, users can produce them very easily. Especially, characters and items DB are stored independently so that they may be reused to the production of scenarios for follow-up or another game. Using UMa, users can write game scenarios more easily and quickly and cooperate with each other at the same time by Web.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.5
• /
• pp.175-182
• /
• 2002

The email system is one of the most popular internet applications used to transmit and exchange personal information. However, the pattern of existing email system is fixed, and the system cannot be expanded or re-used. This thesis has proposed the system which can provide the users with better e-mail data which is flexible, re-usable, and expandable XML data on the web-mail. The process of change is as follows: First, make the XML data to have a tree structure using DOM API and then bring the received messages of the users with the CDONTS. Last, transform the received messages into the element and element value. When the e-mail data is transformed t the XML data, 'the data' and 'the presentation' can be distinguished, which enables the users to see messages according to each individual's unique need. With this system, the user can not only convert data to XML, but also can combine the data segments to a form of letter box in order to manage data conveniently and search the data.