• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제29권7B호
• /
• pp.675-684
• /
• 2004

There have been several efforts to avoid unnecessary retransmission timeouts (RTOs), which is the main cause for TCP throughput degradation. Unnecessary RTOs can be classified into three groups according to their cause. RTOs due to multiple packet losses in the same window for TCP Reno, the most prevalent TCP version, can be avoided by TCP NewReno or using selective acknowledgement (SACK) option. RTOs occurring when a packet is lost in a window that is not large enough to trigger fast retransmit can be avoided by using the Limited Transmit algorithm. In this Paper, we comparatively analyze these schemes to cope with unnecessary RTOs by numerical analysis and simulations. On the basis of the results in this paper, TCP performance can be quantitatively predicted from the aspect of loss recovery probability. Considering that overall performance of TCP is largely dependent upon the loss recovery performance, the results shown in this paper are of great importance.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.404-409
• /
• 2018

The integration of organic and inorganic building blocks into hierarchical porous architectures makes potentially desirable catalytic material in many catalytic applications due to their combination of dissimilar components and well-constructed reactant transport path. In this study, we prepared the hierarchical porous $Co_3O_4@graphene$ 3D gel by hydrothermal method to achieve high catalytic performance in PET glycolysis reaction. Obtained $Co_3O_4@graphene$ 3D gel consisted of interconnected networks of $Co_3O_4$ and graphene sheets, providing large number of accessible active sites for efficient catalytic reaction. These structural merits from synergistic effect of $Co_3O_4$ and graphene gave a high performance in the PET degradation reaction giving high conversion yield of BHET, fast degradation rate of PET, and remarkable stability.

• The KIPS Transactions:PartC
• /
• 제12C권7호
• /
• pp.1039-1046
• /
• 2005

TCP SACK is the unique mechanism to reflect the situation of sink's sequence space, some TCP variants and proposals can perform in conjunction with SACK mechanism for achieving optimal performance. By definition of RFC 2018, however, each contiguous block of data queued at the data receiver is defined in the SACK option by two 32-bit unsigned integers in network byte order. Since TCP Options field has a 40-byte maximum length, when error bursts now, we note that the available option space may not be sufficient to report all blocks present in the receiver's queue and lead to unnecessarily force the TCP sender to retransmit Packets that have actually been received by TCP sink. For overcoming this restriction, in this thesis, a new solution named 'one-byte offset based SACK mechanism' is designed to further improve the performance or TCP SACK and prevent those unwanted retransmissions. The results or both theory analysis and simulation also show that his proposed scheme operates simply and more effectively than the other existing schemes by means of the least bytes and most robust mechanism to the high packet error rates often seen in networks environment.

• Composites Research
• /
• 제25권6호
• /
• pp.178-185
• /
• 2012

One of a unique technique in manipulating a multifunctional composite is demonstrated in this study. An electric field is applied to a liquid suspension in order to align the inclusions along with the direction electric field. This is called FAiMTa(Field Aided Micro Tailoring). It makes orthotropic polymer composites by arranging the micro and/or nano size particle inclusions in chain-line formation. Several kinds of particles such as $Al_2O_3$, graphite, CNT(Carbon Nano Tube), W(Tungsten) are tested to verify the effectiveness of the FAiMTa. The particles redistributed in an epoxy suspension and their coupons show that mechanical and thermal properties of orthotropic and random composites containing those particles depend on the trend of particles' alignment. The micro-images of the functional composite from FAiMTa have been captures and their physical properties demonstrate their wide-range and state-of-the-art application for advanced multifunctional composites.

• Composites Research
• /
• 제29권4호
• /
• pp.203-208
• /
• 2016

Metal and polymer sandwich composites, which are made of sheet metal sheath and polymer or fiber reinforced plastic core, have been reconsidered as an alternative to sheet metal due to their lightness and multifunctional properties such as damping and sound-proof properties. For the successful applications of these composites, the delamination prediction based on the adhesion strength is important element. In this study, the numerical simulation of the delamination behavior of polymeric adhesive tapes with metallic surfaces was performed using cohesive zone elements and finite element software. The traction-separation law of the cohesive zone element was defined using the fracture energy derived from peel mechanics and experimental results from peel test and implemented in finite element software. The peel test of the polymeric adhesive film against steel surface was simulated and compared with experiments, demonstrating reasonable agreement between simulation and experiment.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제53권9호
• /
• pp.62-66
• /
• 2016

This paper presents a MedRadio-band low power low noise amplifier for Medical Devices. A proposed MedRadio-band low power low noise amplifier adopts a current-reuse resistive feedback topology to increase overall gm and reduce power consumption. The gain of the LNA increases by the Q-factor of the additional series RLC input matching network, and its noise figure is minimized by the similar factor. Furthermore, it consumes low power because of low supply voltage and current reuse technique. By exploiting the $g_m$-booting and matching network property, the proposed MedRadio-band low noise amplifier achieves a noise figure of 0.85 dB, a voltage gain of 30 dB, and IIP3 of -7.9 dBm while consuming 0.18 mA from a 1 V supply voltage in $0.13{\mu}m$ CMOS technology.

• Journal of Korea Spatial Information System Society
• /
• 제2권1호
• /
• pp.57-62
• /
• 2000

Open GIS Consortium(OGC) provides with Simple Features Specification for OLE/COM which is a system object technology of interoperability and reusable capability. In this research, the Spatial Reference System(SRS) component is developed based on the OGC specification using ATL. The component presents 44 map projections and transformations between different geographic coordinate systems utilizing the seven parameter(Bursa Wolf) and Molodenski's methods, a user can set up all objects and its attributes comprising SRS and can create SRS and save its setting using predefined text, WellKnownText. The Spatial Reference System component can be easily implemented into the variety of GIS software so that it reduces the developing time for a system and defines new reference system without difficulty.

• Journal of Korea Multimedia Society
• /
• 제10권3호
• /
• pp.316-324
• /
• 2007

Maximum Intensity Projection (MIP) identifies patients' anatomical structures from MR or CT data sets. Recently, it becomes possible to generate MIP images with interactive speed by exploiting Graphics Processing Unit (GPU) even in large volume data sets. Generally, volume boundary plane is obliquely crossed with view-aligned texture plane in hardware-texture based volume rendering. Since the ray sampling distance is not increased at volume boundary in volume rendering, the aliasing problem occurs due to data loss. In this paper, we propose an efficient method to overcome this problem by Re-rendering volume boundary planes. Our method improves image quality to make dense distances between samples near volume boundary which is a high frequency area. Since it is only 6 clipping planes are additionally needed for Re-rendering, high quality rendering can be performed without sacrificing computational efficiency. Furthermore, our method couldbe applied to Minimum Intensity Projection (MinIP) volume rendering.

• Resources Recycling
• /
• 제14권4호
• /
• pp.34-40
• /
• 2005

Reusing of electroless Co-Cu-P waste solution was investigated in the respect of plating time, plating rate, solution composition and deposit. Plating time of cobalt-catalytic surface took longer than that of zincated-catalytic surface. It was possible to reuse the waste solution by mixing $50\%$ fresh solution at batch type. Plating time of initial solution at continuous type took longer 7.5 times over than that of batch type. Plating time of $50\%$ waste solution additive at continuous type took longer 2.5 times over than that of batch type. Component change of cobalt-topper for electroless deposition was greatly affected by deposit inferiority and rapid decrease in plating rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제37B권12호
• /
• pp.1138-1147
• /
• 2012

IEEE standard 802.16, often referred to as WiMAX, is considered a "last mile" broadband wireless access alternative to conventional DSL and Cable Internet. One extension that is recently receiving great attention is the IEEE 802.16j Mobile Multihop Relay (MMR) amendment. The focus of this amendment is the development of simple and lower cost relay stations (RSs) that can enhance network coverage and capacity. We use our proposed simple scheduling scheme for serving the SSs in a fair manner and evaluate the performance of WiMAX networks with relays, especially we analyze the impact of interference between RSs on cell throughput Through simulations and numerical analysis, we make several fundamental observations about interference aware cost effective coverage extension in such networks.