• Title/Summary/Keyword: 재부착 과정

Search Result 86, Processing Time 0.024 seconds

Attachment of Hard Shelled Mussel, Mytilus coruscus and Blue Mussel, Mytilus edulis (홍합 Mytilus coruscus과 지중해담치 Mytilus edulis의 부착 비교)

  • Wi, Chong-Hwan;Kim, Hyeung-Sin;Kim, Jong-Hyun;Chang, Young-Jin;Jung, Min-Min
    • Journal of Aquaculture
    • /
    • v.18 no.3
    • /
    • pp.142-146
    • /
    • 2005
  • In this study, the reattachment processes of small and medium size of spot of Mytilus coruscus and M. edulis were observed. The small spats (Shell length, SH, $3{\sim}7mm$) of hard shelled mussel, M. coruscus showed 100% reattachment rate within 7 minutes after the detachment of byssus thread and 100% survival rate. While large spats (SH 25 mm) showed 85% reattachment rate within 5 hours and 100% survival rate for 24 hours. The reattachment rate of M. edulis (SH 30 mm) was higher than that of M. coruscus (SH, 28 mm). The thread consisted of three identifiable structures; adhesive disc, adhesive thread and adhesive root. The adhesive disk and adhesive thread of M. coruscus were larger and thicker than those of M. edulis, whereas the thickness of adhesive root was the other way round. Further studies are required to identify the relationship between the structure of byssus thread and attachment ability. This study suggests that the sizes of spats could be an important factor in determining the timing of removing and reattaching mussel seedling for aquaculture or releasing to the sea.

Flow Characteristics of Two-Dimensional Turbulent Stepped Wall Jet (2次元 亂流 Stepped Wall Jet 의 流動特性)

  • 부정숙;김경천;박진호;강창수
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.9 no.6
    • /
    • pp.732-742
    • /
    • 1985
  • Measurements of mean velocity and turbulence characteristics are obtained with a linearized constant temperature hot-wire anemometer in a two-dimensional turbulent jet discharging parallel to a flate. Wall static pressure distribution is also measure. The Reynolds number based on the jet nozzle width (D) is about 42,000 and the step height is 2.5D. The reattachment length is found to be 7.5D by using both wool tuft and oil methods. Upstream of the reattachment point, there exist double coherent structures and mean velocity, Reynolds stresses and triple product profiles are asymmetric about jet center line due to the influence of streamline curvature and recirculating flow region. Near the reattachment point, wall static pressure and turbulence quantities change its shape rapidly because of the large eddies by the solid wall. Especially, turbulence intensity has a maximum value in the reattachment regin, then decreases slowly in the redeveloping wall jet ragion. Downstream of X/D=14, a single large scale eddy structure is formed. Far downstream affer the reattachment(X/D.geq.18) mean velocity profile, the decay of maximum velocity and the variation of jet half width are nearly similar to those of plane wall jet, but the Reynolds stresses are higher than those of the latter.

A Study on the Vibration Characteristics of the Eccentrically Stiffened Plate Attached an Orthogonal Stiffener at Arbitrary Angle (직교 보강재가 임의의 각도로 부착된 편면 보강평판의 진동 특성에 관한 연구)

  • 정병환;김찬묵
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1995.10a
    • /
    • pp.172-178
    • /
    • 1995
  • 보강평판은 평판에 각종 보강재를 용접등의 방법에 의해서 종방향, 횡방향, 경사 또는 임의의 방향으로 부착시켜 굽힘 및 비틀림 강성을 향상시킨 구조요소이다. 이러한 구조요소는 구조적 필요성이나 경량화 설계에 따라 선박의 deck, 철도 차량, 항공기 및 자동차 등의 각종 구조물에서 부하능력 및 경제성을 증대시키기 위하여 널리 사용되고 있고, 또한 자동차용 오일팬, 가전기기의 케이싱과 모터의 케이싱등에도 사용되고 있다. 최근 현장에서는 이러한 구조물의 진동 감소 및 방진 문제가 큰 관심사가 되고 있다. 본 논문은 정사각형 알루미늄 평판에 +자 형태의 Box Beam 보강재를 편면 보강하고 4변 자유단의 경계 조건을 설정하였다. 보강재는 유한요소 정식화 과정을 통하여 평판 요소에 등가시키고, 2차원의 평판 구조로 보강 평판을 모델링하고 구조해석 프로그램인 ANSYS를 이용하여 해석하였다. 실험은 Impact Test에 의해서 주파수 응답 함수(FRF)를 각 시편에 대해서 구하고 이를 해석의 고유진동수와 비교하였다. 그리고 보강재가 임의의 각도로 평판에 부착되었을 때 고유진동수의 변화와 진동 모드(mode shape)를 분석하였다.

  • PDF

Resolving Grammatical Marking Ambiguities of Korean: An Eye-tracking Study (안구운동 추적을 통한 한국어 중의성 해소과정 연구)

  • Kim Youngjin
    • Korean Journal of Cognitive Science
    • /
    • v.15 no.4
    • /
    • pp.49-59
    • /
    • 2004
  • An eye-tracking experiment was conducted to examine resolving processes of grammatical marking ambiguities of Korean. and to evaluate predictions from the garden-path model and the constraint-based models on the processing of Korean morphological information. The complex NP clause structure that can be parsed according to the minimal attachment principle was compared to the embedded relative clause structures that have one of the nominative marker (-ka), the delimiter (-man, which roughly corresponds to the English word 'only'), or the topic marker (-nun) on the first NPs. The results clearly showed that Korean marking ambiguities are resolved by the minimal attachment principle, and the topic marker affects reparsing procedures. The pattern of eye fixation times was more compatible with the garden-path model, and was not consistent with the predictions of the constraint-based accounts. Suggestions for further studies were made.

  • PDF

The Effects of Tooth Bleaching Agents on Microhardness of Enamel in situ (수종 치아미백제가 구강내에서 법랑질의 미세경도에 미치는 영향)

  • Park, Yoon-Woo;Park, Se-Hee;Kim, Jin-Woo;Cho, Kyung-Mo
    • Restorative Dentistry and Endodontics
    • /
    • v.31 no.6
    • /
    • pp.470-476
    • /
    • 2006
  • The objective of this in situ study was to evaluate the effects of whitening strip (Claren, LG Household & Health Care Ltd, 2.6% hydrogen peroxide) and gel (Opalescence, Ultradent, 10% carbamide peroxide) on microhardness of enamel in comparison with untreated control. Extracted twenty human upper incisors were disinfected, cleaned, and labial side of each incisor sectioned into 3 fragments by 2 ${\times}$ 2 mm size. After sectioning, labial sides of fragments were flattened and fixed to orthodontic bracket using flowable composite resin. Specimens prepared from each tooth were attached to the labial side of upper incisors of twenty volunteers one by one and treated by three different methods: (1) untreated control (2) treated with whitening strip for 14 days (3) treated with whitening gel for 14 days. Microhardness (Microhardness tester, Zwick) of each specimen was measured at the baseline of pre-treatment, immediate after bleaching treatment, 14 days after bleaching treatment and Knoop Hardness Number was determined. Microhardness changes of experimental groups were compared. The results show that tooth whitening strip and gel used in this study does not effect the microhardness of enamel during bleaching procedure.

An Experimental Study on the Bond Characteristic of GFRP Bars in PVA Fiber Reinforced Activated Hwangtoh Concrete (PVA 섬유보강 황토 콘크리트에 대한 GFRP 보강근의 부착성능에 관한 실험적 연구)

  • Park, Mi-Rae;Kim, Seung-Hun
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.21 no.1
    • /
    • pp.134-141
    • /
    • 2017
  • Many studies have been conducted with respect to the materials to replace the cement in order to reduce the carbon dioxide emissions during the cement production. Activated hwangtoh as cement replacement material goes through calcination process of $850^{\circ}C$. PVA fibers and GFRP bars are used in order to compensate for the cracks of activated hwangtoh concrete(AHC). This paper presents an experimental study investigating the bond characteristic of GFRP bars in PVA fiber reinforced AHC under tensile loads. Experimental results showed that average bond strength factor of specimens with and without PVA fiber was 2.27~2.48 and was not significantly affected by the ratio of PVA fiber andactivated hwangtoh. In addition, as the bond length was increased, the bond strength was reduced.

Investigation on the Turbulence Structure of Reattaching Separated Shear Layer Past a Two-Dimensional Vetrical Fenc(I) (2次元 垂直壁을 지니는 再附着 剝離 斷層 의 亂流構造 에 관한 硏究 (I))

  • 김경천;정명균
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.9 no.4
    • /
    • pp.403-413
    • /
    • 1985
  • Hot-wire measurements of second and third-order mean products of velocity fluctuations have been made in the separated, reattached, and redeveloping boundary layer behind a vertical fence. Mean velocity, wall static pressure distributions have also been measured in the whole flow field. Upstream of the reattachment point, the separated shear layer developes as a free mixing layer, but the gradient of the maximum slope thickness, turbulent intensities and the Reynolds shear stress are higher than that of the mixing layer due to initial streamline curvature and the effects of highly turbulent recirculating flow region. In the reattachment region, Reynolds shear stress and triple products near the surface is far more rapid than the decrease of the shear stress; that is the presence of the solid wall has a marked effect on the apparent gradient diffusivity of intensity or shear stress and throws doubts upon the usefulness of the simple gradient diffusivity model in this region.

Accuracy of conventional and digital mounting of dental models: A literature review (치과용 모형의 모형 부착 과정에서 발생하는 오차에 대한 문헌 고찰)

  • Kim, Cheolmin;Ji, Woon;Chang, Jaeseung;Kim, Sunjai
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.59 no.1
    • /
    • pp.146-152
    • /
    • 2021
  • Accurate transfer of the maxillo-mandibular relationship to an articulator (i.e., mounting) is critical in prosthetic treatment procedures. In the current study, a PubMed search was performed to review the influencing factors for the maxillo-mandibular relationship's accuracy. The search included digital mounting as well as conventional gypsum cast mounting. The results showed that a greater amount of displacement was introduced during positioning the maxillary and mandibular models to interocclusal records rather than the dimensional change of registration material. Most intraoral scanners resulted in an accurate reproduction of the maxillo-mandibular relationship for posterior quadrant scanning; however, the accuracy was declined as the scan area increased to a complete arch scan. The digital mounting accuracy was also influenced by the image processing algorithms and software versions, especially for complete arch scans.

THE EFFECTS OF EGF ON PROLIFERATION AND ATTACHMENT OF HUMAN PERIODONTAL FIBROBLASTS (표피성장인자가 치주인대 섬유 모세포의 증식과 부착에 미치는 영향)

  • Lee, Jong-Eun;Kim, Chong-Kwan;Kim, Seong-Oh;Kim, Yun-Tae;Choi, Hyung-Jun
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.32 no.3
    • /
    • pp.395-402
    • /
    • 2005
  • In considering the healing process of injured periodontal tissue, healing rate would be influenced by the cellular activity of periodontal fibroblasts(PDLFs). In addition, the reattachment among PDLFs should be induced for healing process. The purpose of this study was to evaluate the effects of epidermal growth factor(EGF) on the proliferation and attachment of PDLFs and to verify the efficacy of EGF as a storage media or a pre-replantation conditioner of traumatically avulsed tooth. Human recombinant epidermal growth factor(hrEGF) and human periodontal fibroblasts from first premolar were prepared. At first, MTT assay was done to evaluate the toxic effect on human periodontal fibroblast and the maximum cellular growth of EGF. Cellular proliferation rate was then compared between control group and 10ng/ml EGF added group. Also, western blot was done to evaluate the expression of fibronectin in both groups. The results were as follows: 1. From MTT assay, EGF showed no toxic effect on PDL fibroblasts. The highest proliferation was shown at 10ng/ml EGF. 2. In 10ng/ml EGF added group, the degree of proliferation of PDLFs was significantly higher than that in control group. 3. Fibronectin expression of EGF added group was also significantly higher than that of control group. From this study we could conclude that EGF enhanced the regeneration rate of periodontal fibroblast, which could be used as a pretreatment agent or a storage media for traumatically avulsed teeth.

  • PDF