• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.4
• /
• pp.404-412
• /
• 2011

This experiment was conducted to clarify the effect of the temperature for grain filling duration on quality and taste of cooked rice cultivated in different region in Korea. In 2006 and 2007, 4 mid-late maturing group of rice varieties (Nampyeongbyeo, Ilpumbyeo, Junambyeo and Dongjin 1) were cultivated in 28 experimental plots of 27 different regions located in 8 provinces. The taste of cooked rice were positively correlated with 1,000 grain weight but negatively correlated with protein content of brown rice. Mean temperature for 30 days from heading was more closely correlated with grain filling and tastes of cooked rice than those for 40 days. Though, the optimum mean temperature for the best taste of cooked rice for 30 days after heading was 22.1 to $23.1^{\circ}C$ depending on varieties, in general, 1,000 grain weight and cooked rice taste were the highest in the mean temperature of $22.2^{\circ}C$ for 30 days from heading. But grains were poorly ripened in case of the mean temperature lower than $21.0^{\circ}C$ for 30 days after heading. Therefore, for the better taste of cooked rice in Korea, the developing new rice varieties and cultivation method should be focused to adjust the mean temperature within $22-23^{\circ}C$ during the period of 30 days after heading.

• Culinary science and hospitality research
• /
• v.22 no.7
• /
• pp.112-130
• /
• 2016

In this study the moisture content and chromaticity of fresh made lotus leaf powder added Cheongpomuk to utilize various efficacy of lotus leaf for processed food, as well as chromaticity, moisture content change, texture, total phenolic compound content, DPPH radical scavenging ability and preference of lotus leaf powder added Cheongpomuk with different storage period have been measured and analyzed. From the texture of lotus leaf powder added mung bean as per the storage period, the hardness of fresh Cheongpomuk were $0.38g/cm^2$ from control group, $0.40g/cm^2$ from CCD 1% group, $0.42g/cm^2$ from CCD 3% group, $0.37g/cm^2$ from CCD 5% group, $0.42g/cm^2$ from GGD 1% group, $0.39g/cm^2$ from GGD 3% group, $0.35g/cm^2$ from GGD 5% group, $0.39g/cm^2$ from JLD 1% group, $0.33g/cm^2$ from JLD 3% group, and $0.32g/cm^2$ from JLD 5% group. It has shown that JLD 5% group was the lowest, while CCD 3% group and GGD 1% group were the highest, and there were significant differences among sample groups. For DPPH radical scavenging ability, that of GLD 5% group was 22 times higher than that of control group. In addition, the tendency was increasing by increasing the adding rate of lotus leaf powder though there was some tolerance among sample groups. For total phenolic compound content, that of control group was 6.65 mg CE/100 g, and others were 7.48 mg CE/100 g from CCD 1% group, 15.82 mg CE/100 g from CCD 3% group, 20.15 mg CE/100 g from CCD 5% group, 15.55mg CE/100 g from GGD 1% group, 23.02 mg CE/100 g from GGD 3%, 26.95 mg CE/100 g from GGD 5% group, 3.92 mg CE/100 g from JLD 1% group, 16.72 mg CE/100 g from JLD 3%, and 26.58 mg CE/100 from JLD 5% group. From the analyzing result of responses for color and scent, taste, elasticity, and total preference of lotus leaf powder added Cheongpomuk between two panel groups, there was significant difference for the color, higher from professional cooking instructor group, but there were no significant difference between two groups for all other factors among professional cooking instructors and cooking department students. According to the results, it is expected that various functional foods can be developed by utilizing lotus leaf powder, depending on the growth condition and cultural environment of each region by adding 3% of lotus leaf powder, would be the most suitable recipe for Cheongpomuk.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.232-247
• /
• 1987

Three rice varietis, Dongjinbyeo, Daecheongbyeo and Chucheongbyeo, which are leading cultivars in the Chungnam area, were planted to determine their effects of mixture on the plant characteristics and the blast occurrence. The summary obtained is as follows; 1. The heading dates of each cultivars were not affected by the mixing culture. Only a day was delayed in heading date of Chucheongbyeo under commonly standard fertilizer level. 2. The effects of cultivar mixture on the plant height was high when low level of fertilizer were applied. Of the cultivar mixture, the mixing of Dongjinbyeo and Daecheongbyeo shoed 5.1% of plant height increase. The effects of mixture on the tillering number were apparent only under the standard fertilizer level. The mixture of Dongjinbyeo and Chucheongbyeo was effective in increasing the tillering number up to 5.7% over mean tillering number of each cultivars. 3. The stem height tended to increase as the fertilizer level increased and the effects of cultivar mixture on the stem height was high. The stem height of mixture of Dongjinbyeo and Daecheongbyeo was highest compared with other mixture cropping. On the contrary, the panicle length was shortened as the fertilizer level decreased and cultivars were mixed. Among the cultivar mixtures, the mixture of Dongjinbyeo and Daecheongbyeo showed the most effectives of increasing the panicle length. 4. The total dry weight of mixed and pure cultivars were compared. The mixture of two cultivars was effective in increasing the dry weight of rice upto 3.5% over the average of dry weight of each cultivars. When three cultivars were mixed, there were 8.5% of dry weight increase over not mixed cultivars. The effects of mixture on the dry weight were more apparent under standard fertilizer level. 5. The rates of Neck and Node and Branch Blast occurrence were reduced when cultivars were mixed, and their reduction rates were 11.7% and 14.0%, respectively. The occurrence of Blasts was also decreased under the lowest fertilizer level than the standard fertilizer level. The least Blast occurrence was obtained when Dongjinbyeo and Daecheongbyeo were mixed cropped. 6. Significantly high number of spikelets of per square meter was observed when Chucheongbyeo and Dongjinbyeo were mixed. However, the spikelets of panicle were the lowest when Chucheongbyeo and Dongjinbyeo were mixed. The number of panicles per square meter was increased as the fertilizer levels increased, while the number of spikelets per panicle increased as the fertilizer level decreased. 7. The effects of mixture on the maturing were apparent regardless of the fertilizer level. The 1000 grain weight was higher when lower level of fertilizer was applied. The effects of cultivar mixture on the 1000 grain weight were more apparent in the plots of Chucheongbyeo and Dongjinbyeo mixture and three cultivar mixture. 8. The grain yield increased when cultivars mixed. The increment under mixing cropping was 4.6% over mono cropping. The effects of cultivar mixture on the yield increase were more apparent under lower levels of fertilizer application. The highest yield increase was obtained when Chucheongbyeo and Daecheongbyeo were mixed, and the rate of yield increase was 6.8% over mono-cropping. 9. The grain yield was highly correlated with number of panicles per square meter and dry weight. There was not any significant relationships found among grain yield, spikelets of panicle and ripening percentage.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.215-235
• /
• 1996

The thermal analysis by mathematical model simulation makes it possible to reasonably predict heating and/or cooling requirements of certain greenhouses located under various geographical and climatic environment. It is another advantages of model simulation technique to be able to make it possible to select appropriate heating system, to set up energy utilization strategy, to schedule seasonal crop pattern, as well as to determine new greenhouse ranges. In this study, the control pattern for greenhouse microclimate is categorized as cooling and heating. Dynamic model was adopted to simulate heating requirements and/or energy conservation effectiveness such as energy saving by night-time thermal curtain, estimation of Heating Degree-Hours(HDH), long time prediction of greenhouse thermal behavior, etc. On the other hand, the cooling effects of ventilation, shading, and pad ||||&|||| fan system were partly analyzed by static model. By the experimental work with small size model greenhouse of 1.2m$\times$2.4m, it was found that cooling the greenhouse by spraying cold water directly on greenhouse cover surface or by recirculating cold water through heat exchangers would be effective in greenhouse summer cooling. The mathematical model developed for greenhouse model simulation is highly applicable because it can reflects various climatic factors like temperature, humidity, beam and diffuse solar radiation, wind velocity, etc. This model was closely verified by various weather data obtained through long period greenhouse experiment. Most of the materials relating with greenhouse heating or cooling components were obtained from model greenhouse simulated mathematically by using typical year(1987) data of Jinju Gyeongnam. But some of the materials relating with greenhouse cooling was obtained by performing model experiments which include analyzing cooling effect of water sprayed directly on greenhouse roof surface. The results are summarized as follows : 1. The heating requirements of model greenhouse were highly related with the minimum temperature set for given greenhouse. The setting temperature at night-time is much more influential on heating energy requirement than that at day-time. Therefore It is highly recommended that night- time setting temperature should be carefully determined and controlled. 2. The HDH data obtained by conventional method were estimated on the basis of considerably long term average weather temperature together with the standard base temperature(usually 18.3$^{\circ}C$). This kind of data can merely be used as a relative comparison criteria about heating load, but is not applicable in the calculation of greenhouse heating requirements because of the limited consideration of climatic factors and inappropriate base temperature. By comparing the HDM data with the results of simulation, it is found that the heating system design by HDH data will probably overshoot the actual heating requirement. 3. The energy saving effect of night-time thermal curtain as well as estimated heating requirement is found to be sensitively related with weather condition: Thermal curtain adopted for simulation showed high effectiveness in energy saving which amounts to more than 50% of annual heating requirement. 4. The ventilation performances doting warm seasons are mainly influenced by air exchange rate even though there are some variations depending on greenhouse structural difference, weather and cropping conditions. For air exchanges above 1 volume per minute, the reduction rate of temperature rise on both types of considered greenhouse becomes modest with the additional increase of ventilation capacity. Therefore the desirable ventilation capacity is assumed to be 1 air change per minute, which is the recommended ventilation rate in common greenhouse. 5. In glass covered greenhouse with full production, under clear weather of 50% RH, and continuous 1 air change per minute, the temperature drop in 50% shaded greenhouse and pad ＆ fan systemed greenhouse is 2.6$^{\circ}C$ and.6.1$^{\circ}C$ respectively. The temperature in control greenhouse under continuous air change at this time was 36.6$^{\circ}C$ which was 5.3$^{\circ}C$ above ambient temperature. As a result the greenhouse temperature can be maintained 3$^{\circ}C$ below ambient temperature. But when RH is 80%, it was impossible to drop greenhouse temperature below ambient temperature because possible temperature reduction by pad ||||&|||| fan system at this time is not more than 2.4$^{\circ}C$. 6. During 3 months of hot summer season if the greenhouse is assumed to be cooled only when greenhouse temperature rise above 27$^{\circ}C$, the relationship between RH of ambient air and greenhouse temperature drop($\Delta$T) was formulated as follows : $\Delta$T= -0.077RH＋7.7 7. Time dependent cooling effects performed by operation of each or combination of ventilation, 50% shading, pad ＆ fan of 80% efficiency, were continuously predicted for one typical summer day long. When the greenhouse was cooled only by 1 air change per minute, greenhouse air temperature was 5$^{\circ}C$ above outdoor temperature. Either method alone can not drop greenhouse air temperature below outdoor temperature even under the fully cropped situations. But when both systems were operated together, greenhouse air temperature can be controlled to about 2.0-2.3$^{\circ}C$ below ambient temperature. 8. When the cool water of 6.5-8.5$^{\circ}C$ was sprayed on greenhouse roof surface with the water flow rate of 1.3 liter/min per unit greenhouse floor area, greenhouse air temperature could be dropped down to 16.5-18.$0^{\circ}C$, whlch is about 1$0^{\circ}C$ below the ambient temperature of 26.5-28.$0^{\circ}C$ at that time. The most important thing in cooling greenhouse air effectively with water spray may be obtaining plenty of cool water source like ground water itself or cold water produced by heat-pump. Future work is focused on not only analyzing the feasibility of heat pump operation but also finding the relationships between greenhouse air temperature(T$_{g}$ ), spraying water temperature(T$_{w}$ ), water flow rate(Q), and ambient temperature(T$_{o}$).

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.3
• /
• pp.171-188
• /
• 1977

The response and effect on main upland crops to potassium were discussed and summarized as follows. 1. Adequate average amounts of potash per 10a were 32kg for forage crop; 22.5kg for vegetable crops; 17.3kg for fruit trees; 13.3kg for potatoes; and 6.5kg for cereal crops. Demand of potassium fertilizer in the future will be increased by expanding the acreage of forage crops, vegetable crops and fruit trees. 2. On the average, optimum potash rates on barley, wheat, soybean, corn, white potato and sweet potato were 6.5, 6.9, 4.5, 8.1, 8.9, and 17.7kg per 10a respectively. Yield increaments per 1kg of potash per 10a were 4-5kgs on the average for cereal crops, 68kg for white potato, and 24kg for sweet potato. 3. According to the soil testing data, the exchangeable potassium in the coastal area was higher than that in the inland area and medium in the mountainous area. The exchangeable potassium per province in decreasing order is Jeju>Jeonnam>Kangweon>Kyongnam. Barley : 4. The response of barley to an adequate rate of potassium seemed to be affected more by differences in climatic conditions than to the nature of the soil. 5. The response and the adequate rate of potassium in the southern area, where the temperature is higher, were low because of more release of potassium from the soil. However, the adequate rate of phosphorus was increased due to the fixation of applied phosphorus into the soil in high temperature regions. The more nitrogen application would be required in the southern area due to its high precipitation. 6. The average response of barley to potassium was lower in the southern provinces than northern provinces. Kyongsangpukdo, a southern province, showed a relatively higher response because of the low exchangeable potassium content in the soil and the low-temperature environment in most of cultivation area. 7. Large annual variations in the response to and adequate rates of potassium on barley were noticed. In a cold year, the response of barley to potassium was 2 to 3 times higher than in a normal year. And in the year affected by moisture and drought damage, the responses to potassium was low but adequate rates was higher than cold year. 8. The content of exchangeable potassium in the soil parent materials, in increasing order was Crystalline Schist, Granite, Sedimentary and Basalt. The response of barley to potash occurred in the opposite order with the smallest response being in Crystalline Schist soil. There was a negative correlation between the response and exchangeable potassium contents but there was nearly no difference in the adequate rates of potassium. 9. Exchangeable potassium according to the mode of soil deposition was Alluvium>Residium>Old alluvium>Valley alluvium. The highest response to potash was obtained in Valley alluvium while the other s showed only small differences in responses. 10. Response and adequate rates of potassium seemed to be affected greatly by differences in soil texture. The response to potassium was higher in Sandy loam and Loam soils but the optimum rate of potassium was higher in Clay and Clay loam. Especially when excess amount of potassium was applied in Sandy loam and Loam soils the yield was decreased. 11. The application of potassium retarded the heading date by 1.7 days and increased the length of culm. the number of spikelet per plant, the 1,000 grain weight and the ratio of grain weight to straw. Soybean : 12. Average response of soybean to potassium was the lowest among other cereal crops but 28kg of grain yield was incrased by applying potash at 8kg/10a in newly reclaimed soils. 13. The response in the parent materials soil was in the order of Basalt (Jeju)>Sedimentay>Granite>Lime stone but this response has very wide variations year to year. Corn : 14. The response of corn to potassium decreased in soils where the exchangeable potassium content was high. However, the optimum rate of applied potassium was increased as the soil potassium content was increased because corn production is proportional to the content of soil potassium. 15. An interaction between the response to potassium and the level of phosphorus was noted. A higher response to potassium and higher rates of applied potassium was observed in soils contained optimum level of phosphorus. Potatoes : 16. White potato had a higher requirement for nitrogen than for potassium, which may imply that potato seems to have a higher capability of soil potassium uptake. 17. The yield of white potato was higher in Sandy loam than in Clay loam soil. Potato yields were also higher in soils where the exchangeable potassium content was high even in the same soil texture. However, the response to applied potassium was higher in Clay loam soils than in Sandy loam soils and in paddy soil than in upland soil. 18. The requirement for nitrogen and phosphorus by sweet potato was relatively low. The sweet potato yield is relatively high even under unfavorable soil conditions. A characteristics of sweet potatoes is to require higher level of potassium and to show significant responses to potassium. 19. The response of sweet potato to potassium varied according to soil texture. Higher yields were obtained in Sandy soil, which has a low exchangeable potassium content, by applying sufficient potassium. 20. When the optimum rate of potassium was applied, the yields of sweet potato in newly reclaimed soil were comparable to that in older upland soils.