• Archives of design research
• /
• v.17 no.3
• /
• pp.221-230
• /
• 2004

Design textbooks for general education bring our attention to the education of design as a part of whole education. In this vein, this thesis tried to analyze and discuss on the current status of design education contents included in the 7th educational curriculum of the Art & Life. This study had a historical review of the contents of arts education as well as a review of theoretical contents in art education. Also this thesis analyzed five types of Art & Life text books currently used at high schools with weight given to the design and to the status of pictorial coverage in the text books. Finally, the thesis presented problems of design education through a comparative analysis of high school arts education and design education. Through the analysis, inequality of design contents in education was reported. It was clearly attributable to the backgrounds of text book writers. For example, authors with graphic design backgrounds tended to lack product and environment design concepts, while hand craft section of text books all showed a biased contents towards traditional Korean arts. In the analysis of pictorial coverage, similar to the composition of academic contents, coverage was concentrated in the graphic design areas; inequality in quantity of pictures found with a ratio of 1 to 4. In terms of areas of arts, design contents in text books were concentrated only in arts creation chapters among the 3 major areas of arts appreciation, understanding, and creation. Design education is attained in an atmosphere of creativity and the provision of ample teaching material. It is because diverse contents will generate the development of arts. When compared to design education curriculum of U.S. and Japan, these creativity put their focus of design education in the understanding and emotional contacts, so that every application is easily attained. In terms of expression learning, creativity and diversity of material are emphasized. From Kindergarten to middle, and high school periods, apparently the care contents of deign is emphasized. A textbook in the 7th education curriculum is one of the sources for education. In designing text books, learning process should be emphasized following subjects and natures of arts so that creativity can be achieved. Therefore, a systematic approach for design research and educational development for material would be needed in textbook design.

• Radiation Oncology Journal
• /
• v.16 no.1
• /
• pp.7-16
• /
• 1998

Purpose : To evaluate survival rate and prognostic factors affecting survival of patients with esophageal cancer treated with concurrent chemoradiation. Materials and Methods : Eligibility included biopsy proven invasive carcinoma of the cervical or thoracic esophagus, confined to esophagus and mediastinum with or without regional lymph node and supraclavicular lymph node, and ECOG Performance status $H_0-H_2$. Patients received radiation therapy with 5940cGy over 7 weeks and chemotherapy, consisted of 5-FU(1000 $mg/m^2/day$ in continuous infusion for 5 days, days 1 to 5 and days 29 to 33) and mitomycin C($8mg/m^2$ intravenous bolus at day 1). After concurrent chemoradiation, maintenance chemotherapy was followed with 5-FU(1000 $mg/m^2/day$ in continuous infusion for 5 days at 9th, 13th, and 17th weeks) and cisplatin($80mg/m^2$ intravenous bolus at the first day of each cycle). Results : From November 1989 to November 1995, 44 patients were entered in this study. After treatment, complete response rate and partial response rate were $59\%$ and $41\%$. Overall 1, 2, and 5-year survivals were $59\%$, $38\%$, and $9.6\%$(median 17 months), Prognostic factors affecting survival were response to treatment and T-stage. Among 26 complete responders, there were 6 local recurrences, 3 distant recurrences, 1 local and distant recurrence, and 2 unknown site recurrences Acute and chronic complication rates with grade 3 or more were $20\%$ and $13.0\%$ and there was no treatment-related mortality. Conclusion : Concurrent chemoradiation, compared with historical control groups that treated with radiation alone, improved median survival and did not significantly increase treatment-related complications. Complete responders had longer survival duration than partial responders. Predominant failure pattern was local failure. So, efforts to improve local control should be proposed.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.134-151
• /
• 2014

This paper deals with a review of the structure and production techniques of the Dried-lacquer Amitabha Buddha statue enshrined in Geungnakjeon Hall of Simhyangsa Temple, located in Daeho-dong, Naju-si, Jeollanam-do, Korea. To achieve this goal, X-ray date and two rounds of field research were performed. The data collected were reviewed, and a sample peeled off from the damaged part was analyzed to investigate the structure and material of the background layer. The results revealed that the Simhyangsa Temple Buddha statue was an almost empty Dried-lacquer(Hyeopjeo) Buddha statue where wood core had not been framed and inserted in the statue. It was thus observed that considering that the clothes wrinkles clearly remained, the same one as the irregularity of the outer clothes wrinkles, the Dried-lacquer layer was lifted made in an almost complete shape in the process of forming the clay figure as the origin form. The statue was found to be diagonally incised from the top of the head to the back of the neck to remove the clay and wood core. But in other sites, no incision was confirmed. It was observed that on the site of the head where the incision was made, an adhesives(lacquer or paste) was used. In addition, the black eyes were impacted with beads and the ears, hands, bands, and knots were made of wood. These features are identically shown in the Dried-lacquer Amitabha Buddha statue from Seonguksa Temple, known as a work of the late Goryeo dynasty; the Seated Dried-lacquer Buddha statue in Okura Museum of Art in Tokyo, Japan; the Seated Dried-lacquer Amitabha Buddha statue from Jungnimsa Temple, know as a work of the early Joseon dynasty; and the Seated Vairocana Buddha statue in Bulhoesa Temple, the Seated Dried-lacquer Amitabha Buddha and the Seated Dried-lacquer Buddha statue from Silsangsa Temple. The analysis of the back layer demonstrated that the ground layer and the red lacquer were the production of the time. In particular, the bone ash used for the ground layer was also coated for the ground layer of Buddha statues as well as for the production of the lacquerware during the Goryeo dynasty. It was also found that gold mending was conducted more than twice even in modern times and that the layer of the production time was well preserved despite gold mending several times.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.208-214
• /
• 2019

The glass of $BaO-GeO_2-La_2O_3-ZnO$ system with a transmittance of more than 75 % at mid-wave infrared (MWIR) region in the range of $3{\mu}m$ to $5{\mu}m$ is manufactured and its property is evaluated. After selecting construction that can melt glass through flow button test, $BaO-GeO_2-La_2O_3$ system where 10 mol%, 20 mol% of ZnO were added respectively were melted at $1350^{\circ}C$ for 1 hour and $BaO-GeO_2-La_2O_3$ system of glass was manufactured. Among them, with 20 mol% of ZnO, 16 mol% BaO-56 mol% $GeO_2-8mol%$ $La_2O_3-16mol%$ ZnO system of glass was found to has less than $660^{\circ}C$ of glass transition temperature, more than 1.70 of refractive index, and more than 530 of knoop hardness. Therefore, it is concluded that glass of $BaO-GeO_2-La_2O_3-ZnO$ system of glass with 20 mol% ZnO has good melting conditions at low temperatures and excellent optical properties, thus, can be utilized for special optical materials field.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.20-26
• /
• 2019

Purpose: Recently TF-adaptive movement is developed in order to increase the durability of TF files. The purpose of this study was to assess the effects of adaptive movement on durability and performance of twisted files. Materials and Methods: Resin blocks simulating artificial J-shape canals were used for this study. In TFC group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under continuous rotation 500 rpm/4.0 Ncm. In TFA group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under adaptive movement. After preparing each artificial canal, TF files were observed under dental microscope for assessing existence of unwinding, distortion, and fracture. If unwinding of flute was observed, the number of artificial canals until unwinding of flute occurs was recorded. Required time until instruments reach working length and distance of unwinded portion of files from D0 were measured. All test results were conducted by Mann-Whitney U test at a 0.05 level of significance. Results: No Ni-Ti instrument's separation was observed. Number of resin blocks until file unwinding happens and working time was significantly high in TFA group compared to TF group. Distance of distortion from D0 didn't show significant difference between TFA, TF groups. Conclusion: The number of resin blocks prepared until unwinding happens and working time were significantly high in TFA group. The location of unwinding showed no significant difference between 2 groups. Adaptive movement increased the number of canals prepared until unwinding occurs and working time of twisted files.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.100-121
• /
• 2023

This paper examines the interior settings of a chamber and of a temporary place of enshrinement at Yeonghuijeon (永禧殿, Hall of Eternal Happiness), the representative official portrait hall in which portraits of early and late Joseon kings were enshrined. Also, it discusses the features of the Five Peak screens used therein. The physical environment of a chamber at Yeonghuijeon mainly consisted of a four-panel folding screen with a painting of Five Peaks and a large wooden platform, which was adorned with dragon and lion patterns and attached to lotus-leaf column balustrades. The Five Peak screen was installed on a large platform in the shape of ⊓, spreading across the second and third panels on the back and folding out on the first and fourth panels on the right and left sides. When a portrait was enshrined in a temporary place, a simpler and smaller platform with railings was used. A four-panel folding screen of the Five Peak painting was installed in the same way as in a chamber, but was unfolded around a smaller platform behind it. A royal portrait was displayed in each chamber, whereas a case in which a portrait was rolled up was put on the smaller platform in a temporary place. The Five Peak screens for a chamber and a temporary place were all large four-panel folding screens with two wide panels in the middle and two narrow panels on each side, and only strips of silk were mounted on the four edges of the screens without additional wide lower-side mountings. While screens for the chamber used patterned silk for mounting and white paper for backing on screen frames, screens for the temporary place used plain silk and recycled failed test papers for mounting and backing, respectively. By examining records in the literature on the Five Peak screens for Yeonghuijeon, this paper highlights two Five Peak screens, both of which lost their provenance from the hall. The structures of the two screens reflected the way they were to be installed at the hall. Furthermore, this paper assumes that a Five Peak screen, which had been unfolded on the throne in the main hall of Changdeokgung Palace after the 1960s, was produced in 1858 for the purpose of temporarily enshrining King Sunjo's portrait due to the fact that failed test papers of the 1840s were laid taut over the frame.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.103-103
• /
• 2022

다복찰은 전라북도농업 기술원에서 2012~2020년에 신명흑찰과 익산488호를 교배하여 육성한 찰벼이며, 중대립, 단간, 내도복, 다수성의 특징을 보인다. 동진찰은 1998년도에 육성되었으며, 우리나라에서 가장 인기 있는 찰벼이다(재배면적 25,161ha/2021년 기준). 드문모심기 재배 기술은 2017년부터 도입되었으며, 밀파 육묘하여 재식밀도 및 재식주수를 감소함으로써 소요되는 재료비 등 경비 및 투입되는 노동력을 절감하는 경제성 있는 기술이다. 따라서 본 연구는 전라북도농업기술원에서 육성한 다복찰 보급 확대 및 가장 인기 높은 동진찰의 드문모심기 재배기술 확립 일환으로 시작되었으며, 2024년까지 3년간 실시할 계획이다. 시험은 기술원 논 포장에서 실시하였으며, 시험품종은 다복찰, 동진찰, 시험요인은 이앙시기(3처리) 및 재식밀도(4처리)를 두었다. 이앙시기별로 이앙 17일 전에 온탕소독(62℃, 10분), 종자소독(32℃, 1일), 침종(32℃, 1일), 간이출하(30℃, 3일) 과정을 거쳐 부직포 육묘(12일 정도)를 실시하였다. 5월20일(이앙520)부터 5월30일(이앙530), 6월9일(이앙609)까지 10일 간격으로 드문모심기 전용 이앙기로 이앙하였으며, 주당 본수는 5.7개 정도였다. 이앙 시기별로 시험포장을 구분하였고 포장내에 2품종, 각각 3.3m2당 80주, 60주, 50주, 37주 등 재식밀도 처리구를 두었으며, 처리구마다 3반복 조사구(10주/반복, 5본/주) 설치하였다. 10a당 9-4.5-5.7kg(N-P₂O₅-K₂O)를 밑거름(50%)-분얼거름(20)-이삭거름(30) 등 3회 거쳐 시비하였다. 중간물떼기는 이앙32일째부터 10일간 실시하였으며, 예상 출수 30일 전에 충분하게 담수하였다. 이앙20일째부터 10일 간격으로 경수, 초장, 엽색도 등 생육 조사, 그리고 출수기, 후기 생육 및 병해충을 조사하였다. 향후 수확기에 수량, 수량구성요소, 미질 및 품위를 분석할 계획이다. 시험토양은 pH 6.0~6.3, EC는0.68~0.85dS/m, 유기물함량은 52~57g/kg 수준으로 높았다. 동진찰 발아율(94.0~98.1%)이 다복찰(89.9~94.9%)보다 우수하였다(3~6%P ↑). 다복찰 묘 충실도(102~106mg/주)가 동진찰(79~101mg/주)보다 다소 좋았으며, 이앙530 묘소질이 가장 좋았다. 동진찰 초장은 다복찰에 비해 다소 길었으나 이앙시기 및 재식밀도별 초장의 변화 유형은 비슷하였다. 이앙520구의 80주에서 초장이 가장 작았고 이앙609구에서는 80주에서 다소 길었으나, 처리구간의 유의성은 없었다. 동진찰 및 다복찰 경수는 37주에서 이앙 후 40일째, 50주, 60주, 80주에서는 30일째 가장 컸다. 출수기는 다복찰에 비해 동진찰이 3~7일 정도 빨랐으며, 특히 이앙520 동진찰에서는 재식밀도가 높을수록 출수기가 빠른 경향을 보였으며, 이앙530 이후에는 재식밀도간 차이가 거의 없었다. 동진찰에 비해 다복찰 간장이 3~6cm 작았으며, 2품종 모두 이앙609구에서 가장 낮은 값을 보였다. 수장도 간장과 비슷한 경향을 보였다. 수수는 2품종 모두 이앙이 늦을수록 증가하였으며, 37주에서 가장 높았으며, 80주에 비해 다복찰, 동진찰 각각 73.8%, 77.4% 높았다. 다복찰의 경우 3.3m²당 수수는 이앙시기별과 관계없이 상대적으로 80주에서 가장 많았고 이앙520에서 재식밀도간 차이는 감소하였지만 이앙시기가 늦을수록 수수는 증가하는 경향을 보였다. 동진찰도 비슷한 경향을 보였으며, 이앙520과 이앙609 사이에 수수 차이는 적었다. 병 발생은 잎집무늬마름병, 세균성벼알마름병, 이삭누룩병이 주로 관찰되었으며, 세균성 벼알마름병은 출수기와 맞물린 이앙530에서 가장 크게 발생하였으며, 이앙520도 비슷한 경향을 보였다. 이삭누룩병 발생이 심하였는데 재식밀도간 차이보다는 이앙시기별 차이가 더 크게 발생하였으며 품종 간의 병 발생 차이는 없었다. 이상의 결과로 수수 측면에서 조기 이앙할 경우에는 50~60주, 늦은 이앙 시에는 80주가 유리할 것으로 보이며, 추후주당 립수, 등숙률, 천립중 등을 조사하고 경영비 등을 고려하여 합리적인 이앙시기 및 재식밀도를 판단할 수 있을 것으로 판단된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.4
• /
• pp.225-232
• /
• 2024

This study focuses on the determination of the fracture mode in composite laminates using deep learning. With the increase in the use of laminated composites in numerous engineering applications, the insurance of their integrity and performance is of paramount importance. However, owing to the complex nature of these materials, the identification of fracture modes is often a tedious and time-consuming task that requires critical domain knowledge. Therefore, to alleviate these issues, this study aims to utilize modern artificial intelligence technology to automate the fractographic analysis of laminated composites. To accomplish this goal, scanning electron microscopy (SEM) images of fractured tensile test specimens are obtained from laminated composites to showcase various fracture modes. These SEM images are then categorized based on numerous fracture modes, including fiber breakage, fiber pull-out, mix-mode fracture, matrix brittle fracture, and matrix ductile fracture. Next, the collective data for all classes are divided into train, test, and validation datasets. Two state-of-the-art, deep learning-based pre-trained models, namely, DenseNet and GoogleNet, are trained to learn the discriminative features for each fracture mode. The DenseNet models shows training and testing accuracies of 94.01% and 75.49%, respectively, whereas those of the GoogleNet model are 84.55% and 54.48%, respectively. The trained deep learning models are then validated on unseen validation datasets. This validation demonstrates that the DenseNet model, owing to its deeper architecture, can extract high-quality features, resulting in 84.44% validation accuracy. This value is 36.84% higher than that of the GoogleNet model. Hence, these results affirm that the DenseNet model is effective in performing fractographic analyses of laminated composites by predicting fracture modes with high precision.

• Journal of Wetlands Research
• /
• v.17 no.1
• /
• pp.62-74
• /
• 2015

Urban areas are variously under threat including deterioration of ecological functions. Many pond wetland types have been created as part of an effort to improve and restore this urban environment. This study was arranged to examine improvement plans of wetlands in urban areas by analyzing semi-natural wetlands in farm areas. As for environment for water quality, it suggested the inflow of natural water neighboring rivers or the direct inflow of rain as the improvement plans. The result which analyzed soil pH, OM, and T-N content of the soil environment mentioned that urban areas supplied artificial sluices, removed apoptotic bodies, and used artificial soil and waterproofing materials and use of natural materials in design and construction, the sluice state of the natural form, and negligence of autumn plants were suggested as the improvement plans. Florae appeared in the subject sites of the study have found that there are 35 families 69 species in urban areas and 53 families 142 species in rural areas. As the average has found that there are 18.5 families 29.3 species in 4 urban areas and 26.3 families 53.5 species in 4 rural areas, the big difference between them was analyzed. As the cause has found that there are differences in yearly plants in farming areas when compared to urban areas, creation of various basic environments including soil and water quality was suggested to make yearly plants settle down widely. Naturalized plants have found that there are no big differences between urban areas and rural areas. However, the average of the naturalized ratio in urban areas is 17.4% as the naturalized plants are about 1/4 of the appeared plants. As it was analyzed to be higher than 7.7%, the average of the naturalized ratio in farming areas as the big difference, creation of various inhabiting environments was suggested to make more yearly plants appear like the analyzed result of the life type. Consideration of placement, materials, and inhabiting environments was suggested to make creation of wetlands well appreciated to improve functions of wetlands in urban areas. It is expected that the above results of the study will be utilized in creation and improvement of the pond wetlands which can play a huge role in increase and improvement of biological diversity in urban areas.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.119-123
• /
• 1997

This study was performed to evaluate the influence of composting process with an intermittent aeration on the variation of rhizosphere soil temperature, $CO_2$ and $NH_3$ release, and the growth reponse of tomato plantlet in traditional and composting greenhouse. As the temperature of composting materials increased, rhizosphere soil temperature in 30cm depth rose up to $32^{\circ}C$ at one week after introduction. This was $18^{\circ}C$ higher than that of traditional greenhouse. After 20 days of active composting, temperature of rhizosphere soil started to decrease and remained constant at $23^{\circ}C$ after 35 days. For the traditional greenhouse, the averaged temperature ranged at $14{\sim}15^{\circ}C$. This results showed that composting greenhouse had the greater effect on increasing the underground temperature. Average value of evoluted $CO_2$ from the composting greenhouse for 70 days was $782{\sim}1154ppm$. This was $1.7{\sim}2.6$ times higher than that of the traditional greenhouse with an average of $440{\sim}462ppm$. $NH_3$ release was highest during $2{\sim}10$ days in intermittent aerated composting and reached to 134 ppm maximum on the 5th day, then decreased rapidly, and maintained at $3{\sim}4ppm$ after 17 days. Increased photosynthesis due to the $CO_2$ gas and a favorable rhizosphere environment due to the increased underground temperature resulted in improved growth, yield, and Brix degree of tomato fruit.