• Culinary science and hospitality research
• /
• v.13 no.3
• /
• pp.12-19
• /
• 2007

본 연구의 목적은 한국의 전통음식 중의 하나인 비빔밥의 재료들의 색채 범위를 분석하여 메뉴북에 인쇄되어지는 재료별 색채범위를 제시하고자 하였다. 본 연구의 목적을 달성하기 위하여 다음과 같은 과정을 통해 진행하였다. 먼저 한국의 전통음식에 근거한 비빔밥 사진과 레시피를 확정하였으며, 요리 전문 사진가를 통해 메뉴북에 가장 보기 좋게 인쇄되어질 수 있는 촬영 기준을 선정하였고, 위의 환경에서 비빔밥 사진을 촬영하였다. 세부적으로 3회 정도의 사진 촬영을 한 후 가장 좋은 상태의 사진을 선정하여 이 때 각 재료들의 색채 값을 측정하였다. 색채 범위 측정을 위해서 Lab 값과 CMYK 값을 적용하였는데, Lab 값은 밝기, 붉은색, 황색을 측정하는 값으로 육안으로 표현되어지는 색이며, CMYK 값은 메뉴 북에 인쇄되어지는 색의 값을 의미한다. 본 연구의 결과, 육안으로 보여지는 색깔과 메뉴북에 인쇄되어지는 값이 다르게 보여진다는 결과를 보였다. 최적 상태 각 재료별 인쇄 값은 다음과 같다. 청포묵은 C23 M5 Y8 K0였고, 호박은 C75 M24 Y100 K9였으며, 고사리 C64 M55 Y76 K55였다. 콩나물은 C38 M24 Y55 K1였고, 당근은 C12 M75 Y87 K2였으며, 표고버섯은 C45 M37 Y78 K11였다, 시금치는 C82 M44 Y100 K48였으며, 도라지는 C25 M5 Y24 K0였고, 계란은 C26 M19 Y100 K0였으며, 마지막으로 쇠고기는 C66 M5 Y72 K0였다.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.83-88
• /
• 1995

The common practice for the identification of piezoelectric properties is based on the use of immittance of a resonator with a certain geometry and poling direction. In this paper, a new method is suggested to identify the complex-valued piezoelectric material constants. This method Is based on the minimization of differences between the analytical immittance and the experimental measurement of resonator. Non-linear minimization problems are formulated to find out the unknown properties relevant to the resonators. The immittance data used for identification are measured at a number of frequencies which cover the vicinity of resonance frequency and the low frequency region. To illustrate the proposed technique, the complex-valued coefficients are identified for a typical PZT4 ceramic composition.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.670-674
• /
• 1999

Accurate measurements of elastic constants are important from the view points of both science and engineering. The measurement can be viewed from scientific principle as a service tools for analyzing and improving the understanding of the nature of bondings between atoms and between ions. Also, from engineering perspective it would became an important factor to be definitely considered for the design of machinery equipments. In this investigation, two dynamic experimental methods of vibrations (acoustic method and Impulse technique method) are utilized and the results from the both methods are compared to obtain elastic constants data with a high degree of accuracy. The resonance frequencies obtained from the two methods are applied to both Euler and Timoshenko beam equations respectively, to determine the sources for possible differences.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.326-326
• /
• 2008

일반적인 고상반응법을 이용하여 $Eu^{2+}$ 활성화 $\alpha$-sialon 황색 형광체를 합성한 후 구조 및 광학특성을 측정하였다. $Ca^{2+}$와 $Si^{4+}$ 이온의 비화학양론적 첨가에 따른 광학 특성 측정결과, 중심 발광 파장이 약 585 nm 인 높은 휘도의 황색형광체를 얻을 수 있었다. 본 연구에서는 $Ca^{2+}:Si^{4+}$ 첨가비에 따른 광학특성 변화를 관찰하였으며, 이를 바탕으로 구조 및 미세구조 변화에 대한 연구를 수행하였다. 20 mol%의 Al deficient 조성을 갖는 형광체의 광학특성 측정결과 화학양론조성에 비해 20% 이상의 휘도향상을 나타내었다. 이와 같은 결과로부터, 본 연구에서 제시된 Al deficient $\alpha$-sialon 황색 형광체는 자외선 및 청색 LED용 형광체로 적합할 것으로 판단된다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.10-19
• /
• 1993

As a method to measure the absorbing characteristics of microwave absorber, the various microwave measuring method can be used fundamentally. There is, however, a big problem in measuring errors, since the wavelength of microwave such as used for radar is very short. Therefore, this research aimed to design and fabricate a converting adaptor of 20mm .PHI. coaxial tube from a Type - N connector to $20mm\phi$ coaxial tube and to use it for evaluating absorption characteristics of microwave absorber. Furthermore, the measurements of absorbing characteristics and material constants have been performed and reviewed, which were carried out by using the coaxial tube and by using rectangular waveguide, res- pectively. As a result, the validity of the proposed measuring method has been confirmed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.358-363
• /
• 2008

Ultrasonic nonlinearity has been considered as a promising method to evaluate the micro damage of material; however, its magnitude is so small that its measurement is not easy. Thus, in this study, we investigate the effects of such experimental system dependent factors in the measurement of ultrasonic nonlinear parameter by using contact PZT transducer. Experimental results showed that the effect of system dependent nonlinearity is reduced when the contact pressure and transducer input voltage are sufficiently large. These results will be very useful to find out the proper experiment condition to measure rather accurate nonlinear parameter.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.54-61
• /
• 2001

Magnetostrictive materials have nonlinear elasto-magnetic properties. However the constitutive equations to describe the nonlinear properties are not available, yet. In this study we develope the equation in magnetostrictive materials by use of piezomagnetic constitutive equation which is quasi-linearized. With the wave equation, we determine the propagation velocity inside the magnetostrictive materials when a plane wave propagates along a given magnetic field. Validity of the calculated velocity is verified through comparison with experimental velocity measurement results for the most representative magnetostrictive materials. Terfenol-D.

• Korean Journal of Materials Research
• /
• v.6 no.11
• /
• pp.1090-1098
• /
• 1996

개조한 가스 금속 아아크 용접공정을 이용하여 SiC/AI 금속기 복합재료를 제조하고 그 특성을 조사하였다. AI 모재위에 강화입자의 크기와 부피분율을 변화하여 다양한 SiC/AI 복합재료층을 제조하였고, 만들어진 복합재료층의 특성은 미세조직관찰과 미소경도시험을 통하여 이루어졌다. 복합재료층의 두께는 약 7-8mm로 측정되었고 균일한 강화입자의 분포도를 얻을 수 있었다. 분산입자의 부피분률은 Ar가스의 유량에 의하여 조절하였고 분산입자의 부피분률이 증가하고 크기가 작아짐에 따라 기지의 수지상 응고조직은 더욱 미세화되었다. 복합재료의 부피경도는 분산입자의 부피분률이 감소함에 따라 낮아졌으나 입자 크기에는 크게 변화가 없는 것으로 나타났다.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.905-911
• /
• 1998

Damping is a property for materials and systems to dissipate energy during periodic deformations. Generally, damping causes stiff decrease in amplitudes and shifts in phases. Also, even at resonance, amplitudes are substantially attenuated. This phenomenon of damping helps in reducing stresses developed during vibrations and consequently improves fatigue lives of materials. In this work internal damping and complex moduli are experimentally determined. An impulse technique is utilized in experiments and cantilever beams are selected as test subjects for the measurements of flextural vibrations since the beams lend themselves easily as simplistic ideal models. A resonance method is employed to determine resonance frequencies which are utilized to compute storage moduli. Also, loss moduli are evaluated from damping capacities and storage moduli. The storage and loss moduli combined yield complex moduli. Finally internal damping is evaluated from bandwidth technique, the real component of the transfer function.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.3
• /
• pp.135-146
• /
• 1996

In this study, the properties of super flowing concrete containing fly ash were experimentally investigated and compared with those of ordinary concrete. Tests were carried out on five types of super flowing concrete mixes containing fly ash and three types of ordinary concrete mixes without fly ash. Flow test, 0-funnel test, box test, L type test and slump test were carried out to obtain the properties for flowability and workability of fresh concrete. The mechanical properties of hardened concrete were also investigated in terms of compressive strength, splitting tensile strength, modulus of elasticity, creep and drying shrinkage. In fresh concrete, it was found that super flowing concrete had excellent workability and flowability compared with ordinary concrete, and had self-compactable performance. Super flowing concrete *also had good mechanical properties at both early and late ages with compressive strength reaching as high as 40 MPa at 28 days. The creep deformation of super flowing concrete investigated was relatively lower than that of ordinary concrete, but drying shrinkage was much higher.