• Korean journal of food and cookery science
• /
• v.19 no.5
• /
• pp.603-608
• /
• 2003

In approximate composition, crude protein, lipid, ash, crude fiber, and N-free extract constituted 14.70%, 3.10%, 6.90%, 18.20%, and 57.10%, respectively, in Korean safflower flowers, compared to 12.60%, 2.70%, 5.80%, 16.40% and 62.50%, respectively, in Chinese safflower flowers. This indicated that Korean safflower flowers surpassed their Chinese counterparts except in terms of N-free extract. Free sugars such as fructose, glucose, and sucrose were proven to be dominant in both domestic and Chinese safflower flowers, while little xylose was contained. For content of polyphenolic compound, Korean safflower flowers contained 13.85% water soluble extract and 9.70% MeOH extract, compared to 9.39% and 7.04%, respectively, for the Chinese variety, confirming the higher levels in the Korean variety. For fatty acids, (Ed- the following results are not presented in ratio form) saturated fatty acids and unsaturated fatty acids comprised 6.80% and 93.20% in Korean safflower flowers and 16.0% and 84.0% in Chinese safflower flowers, respectively. Linoleic, oleic, and palmitoleic acids comprised 75.30%, 11.60%, and 3.40% in Korean safflower flowers, and 66.70%, 11.20%, and 6.10% in the Chinese variety, respectively. Of amino acids, essential amino acids comprised 46.67% in Korean safflower flowers and 36.79% in the Chinese variety. Moreover, total essential amino acids in Korean safflower flowers were higher than those of their counterparts. Non-essential amino acid comprised 65.17% in the Korean variety and 54.49% in the Chinese. In terms of mineral content, Korean safflower flowers contained more Ca, Cu, Fe and Mn than those of China, while Chinese safflower flowers contained more A1, Ba, Mg, K, Na, Zn, Sr and P.

• Horticultural Science & Technology
• /
• v.29 no.1
• /
• pp.23-28
• /
• 2011

Experiments were conducted to investigate the optimum concentration of the nutrient solution in strawberry 'Sulhyang' with hydroponics in relationship between root activity and nutrient concentrations. Nutrient solutions for strawberry, made by Yamazaki, were supplied EC 0.5, 1.0, 2.0 $dS{\cdot}m^{-1}$ during experiment period. Growth of shoot and root of strawberries grown in visible plastic pot was observed during experiment. Petiole length was longest in plants grown in EC 1.0 $dS{\cdot}m^{-1}$, followed by 2.0 and 0.5 $dS{\cdot}m^{-1}$. Leaf width was longest in plants grown in EC 1.0 $dS{\cdot}m^{-1}$, followed by 0.5 and 2.0 $dS{\cdot}m^{-1}$. Fruit length, fruit diameter, fruit weight and yield were higher in EC 0.5 and 1.0 $dS{\cdot}m^{-1}$ than 2.0 $dS{\cdot}m^{-1}$ treatment but, soluble solids of the fruit did not show statistical differences among treatments. Shoot dry weight was heaviest in EC 1.0 $dS{\cdot}m^{-1}$, followed by 0.5 and 2.0 $dS{\cdot}m^{-1}$. Root dry weight was heavier in EC 0.5 and 1.0 $dS{\cdot}m^{-1}$ but significantly light in 2.0 $dS{\cdot}m^{-1}$. pH of the drainage solution was elevated in low nutrient concentration and lowered in high concentration. Also root activity was high in low nutrient concentration and low in high concentration. As a result, the optimum EC for strawberry 'Sulhyang' was EC 1.0 $dS{\cdot}m^{-1}$ in this experiment. It was confirmed that there was high relationship between root activity and pH of drainage solution. This result will be utilized as an indicator for strawberry hydroponics.

• Journal of KIISE:Databases
• /
• v.33 no.1
• /
• pp.102-116
• /
• 2006

Electronic catalogs (or e-catalogs) hold information about the goods and services offered or requested by the participants, and consequently, form the basis of an e-commerce transaction. Catalog management is complicated by a number of factors and product classification is at the core of these issues. Classification hierarchy is used for spend analysis, custom3 regulation, and product identification. Classification is the foundation on which product databases are designed, and plays a central role in almost all aspects of management and use of product information. However, product classification has received little formal treatment in terms of underlying model, operations, and semantics. We believe that the lack of a logical model for classification Introduces a number of problems not only for the classification itself but also for the product database in general. It needs to meet diverse user views to support efficient and convenient use of product information. It needs to be changed and evolved very often without breaking consistency in the cases of introduction of new products, extinction of existing products, class reorganization, and class specialization. It also needs to be merged and mapped with other classification schemes without information loss when B2B transactions occur. For these requirements, a classification scheme should be so dynamic that it takes in them within right time and cost. The existing classification schemes widely used today such as UNSPSC and eClass, however, have a lot of limitations to meet these requirements for dynamic features of classification. In this paper, we try to understand what it means to classify products and present how best to represent classification schemes so as to capture the semantics behind the classifications and facilitate mappings between them. Product information implies a plenty of semantics such as class attributes like material, time, place, etc., and integrity constraints. In this paper, we analyze the dynamic features of product databases and the limitation of existing code based classification schemes. And describe the semantic classification model, which satisfies the requirements for dynamic features oi product databases. It provides a means to explicitly and formally express more semantics for product classes and organizes class relationships into a graph. We believe the model proposed in this paper satisfies the requirements and challenges that have been raised by previous works.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.629-636
• /
• 1999

Gonadal development, gametogenesis, reproductive cycle, egg-diameter and composition, condition factor, and the first sexual maturity of the clam, Potamocorbula amurensis were investigated by histological observation. Samples were collected monthly from the tidal flat of Moonpo, Puan-gun, Chollabuk-do, west coast of Korea from November 1996 to October 1997. P. amurensis is dioecious and oviparous. The gonads were composed of a number of gametogenic follicles. The oogonia and fully ripe oocytes were $9\~12\mu$m and $50\~60\mu$m in diameter, respectively. Each of the spermatogenic follicle formed stratified layers composed of spermatogonia, spermatocytes spermatids, and spermatozoa in groups on the follicular wall. The reproductive cycle of P. amurensis could be classified into five successive stages: early active, late active, ripe, partially spawned, and recovery. Spawning occurred twice a year from May to July and from September to October, the main spawning seasons also appeared twice a year between May and June, and in October when the water temperatures reached above $18^{\circ}C$. The monthly changes in the condition factor were closely related with the reproductive cycle. Minimum size for the sexual maturation of female and male were 8.1 mm in shell length. There were two patterns for the gametogenesis: 1. After spawning, the undischarged ripe oocytes and spermatozoa in the follicles were degenerated and absorbed, but in part, the existing follicles were not contracted significantly and then they took part in new gametogenesis within one or two months (especially, in summer). 2. After spawning, each follicle was contracted, thereafter gametogenesis again occurred in newly formed follicles.

• Journal of Korean Society of Forest Science
• /
• v.47 no.1
• /
• pp.44-51
• /
• 1980

In order to find out the suitable methods that can omit the earth healing and increase the survival through improving the seedling-healing and transportable methods. Several trials with plastic vinyl have been done and its results are as follows: 1. Though P. rigitaeda seedling have been stored in the black and white vinyl sack for 35 days in the storehouse. This seedling have survived with very high percentage as Table 1. This means that the earth healing work at the nursery or planting area can be omitted if seedling sould be stored in the storehouse by using the vinyl sack. The possibilities of long-period storage in the black and white vinyl sack seem to be come from the reasons that air humidity in the sack is nearly 100% and its air temperature is only around $15^{\circ}C$ with very little difference between day and night time. This sack also can be utilized in place of the planting sack, and though this sack with seedling have been laid under direct sunshine for 1 to 2 days. Any difference between the sack stored in the storehouse has not been observed on the survival specially Table 2. 2. When the bundled seedling have been covered with the black and white vinyl instead of earth healing, even if these seedling have been laid for 18 days under the vinyl. This seedling show us high survival as Table 3. High humidity with nearly 95%, very little difference of air temperature between day and night time under the vinyl and not so big difference between out-and inside temperature could be reasons of high survival to be considered. So through covering by the black and white vinyl. The labour power for earth healing works can be saved also. 3. In order to protect the healed seedling from the direct sunshine and the eva-transpiration. Black vinyl net and reed mat could be effective for this purpose. Because vinyl net could intercept around one to third, reed mat two to third of total solar energy and also suppress more than 50% of total water loss by the transpiration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.9
• /
• pp.1139-1145
• /
• 2006

In this study, antioxidant activities of enzymatic and methanolic extracts from E. cava stem and leave were evaluated by measuring the scavenging activities on 1,1 diphenyl 2 picrylhydrazyl (DPPH), hydroxyl radical, hydrogen peroxide and the inhibitory effects on DNA damage induced by oxidative stress of cells. Enzymatic extracts were prepared by enzymatic hydrolysis of both stem and leave using food grade five different carbohydrases (Viscozyme, Celluclast, AMG, Termamyl, Ultraflo) and five proteases (Protamex, Kojizyme, Neutrase, Flavourzyme, Alcalase). The enzymatic extracts were lower than methanolic extracts in polyphenol contents, but higher in extraction yield by approximately 30%. The enzymatic extracts were superior to methanolic extracts in DPPH and H2O2 scavenging activities and DNA damage protective effect. There were no significant antioxidant activity difference between stem and leave, but the extracts of leave were relatively better than those of stem. In this study it is suggested that E. cava stem as well as its leave would be a good raw materials for antioxidants compound extraction and enzymatic hydrolysis would be a good strategy to prepare antioxidant extracts from seaweeds.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.357-386
• /
• 2007

At present, thirteen Buddhist bells of Unified Silla are known to the world: Six in Korea, five in Japan and two other bells, and three out of them are impossible to make out its original form. Therefore, we divided the form of Unified Silla Buddhist bells based on the ten other bells, and we tried out to prove the manufacturing technology by the comparison of the research material of Uncheon-dong bell and existing research materials of other bells, in other to find their linkage based on the alloy elemental composition. We divided Unified Silla Buddhist bell into two types: Type I has symmetric apsaras and regular patterns on its face and it was made in early Silla period; type II has asymmetric apsaras and irregular pattern arrangement and made in late Silla period. In particular, Uncheon-dong Buddhist bells is very similar to Komyoji[光明寺] temple bell from ninth century in Japan. It is peculiar that the apsaras on Uncheon-dong bell play vertical music instruments that are never seen in Unified Silla Buddhist bell. Most of Unified Silla Buddhist bell are compounded with Cu-Sn or Cu-Sn-Pb system. From eighth and ninth century, bells were cast with even composition of copper, tin and lead, and the bronze alloy ratio was similar to the record in Gogonggi[考工記], Jurye[周禮], a book from ancient China. Particularly, Uncheon-dong bell is in a rare case of Cu-Sn-Pb-As system. As had been rarely used in Unified Silla Buddhist bells, so we presented the relative research materials. As has the same nature as Pb. Because As easily volatilize at high temperature, it is hard to use. But it has its merit of solidity and durability. Pb enhances fluidity and thereby expresses the patterns more distinct; As makes the bell stronger. The result of lead isotope ratio could not exactly reveal a concrete producing center. However, over the analysis of our samples, hereby we suggest Uncheon-dong bell was made of materials from just one ore deposit.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2019

Purpose: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. Materials and Methods: Two bulk-fill and four conventional resin composites were filled in cylindrical molds (6 mm diameter, 4 mm height) and light-cured. The specimens were stored in $34^{\circ}C$ distilled water for 24 h. Spectrophotometer was used to determine the color value according to the CIE $L^*a^*b^*$ color space. Each group was divided into three groups according to polishing methods (n = 5). Group 1 was control group (Mylar strip group), group 2 was polished with PoGo, and group 3 was polished with Sof-Lex Spiral wheels. Color evaluation was performed weekly for 4 weeks after immersion in $34^{\circ}C$ distilled water. The results were analyzed by generalized least squares method (P < 0.05). Results: Generalized least squares analysis revealed that Sof-Lex Spiral wheels group showed the significantly lower ${\Delta}E$ values compared to PoGo and control group (P < 0.05). The ${\Delta}E$ values of polished group showed the significantly lower than the ${\Delta}E$ values of unpolished group (P < 0.05). Regarding color changes of composite resins, there was no significant difference between the ${\Delta}E$ values of Filtek Z250 and Filtek Z350 XT Universal restorative in all time intervals (P < 0.05). Tetric N-Ceram Bulk Fill showed the significantly lower ${\Delta}E$ values compared to other composite resins in 1, 2, 3 weeks (P < 0.05). Conclusion: Within the limitations of this study, polishing methods influence the color stabilities of composite resins. The group polished with Sof-Lex Spiral Wheels showed more resistance to discoloration than group polished with PoGo.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.20-26
• /
• 2019

Purpose: Recently TF-adaptive movement is developed in order to increase the durability of TF files. The purpose of this study was to assess the effects of adaptive movement on durability and performance of twisted files. Materials and Methods: Resin blocks simulating artificial J-shape canals were used for this study. In TFC group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under continuous rotation 500 rpm/4.0 Ncm. In TFA group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under adaptive movement. After preparing each artificial canal, TF files were observed under dental microscope for assessing existence of unwinding, distortion, and fracture. If unwinding of flute was observed, the number of artificial canals until unwinding of flute occurs was recorded. Required time until instruments reach working length and distance of unwinded portion of files from D0 were measured. All test results were conducted by Mann-Whitney U test at a 0.05 level of significance. Results: No Ni-Ti instrument's separation was observed. Number of resin blocks until file unwinding happens and working time was significantly high in TFA group compared to TF group. Distance of distortion from D0 didn't show significant difference between TFA, TF groups. Conclusion: The number of resin blocks prepared until unwinding happens and working time were significantly high in TFA group. The location of unwinding showed no significant difference between 2 groups. Adaptive movement increased the number of canals prepared until unwinding occurs and working time of twisted files.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.65-71
• /
• 2019

With regard to current Neck CT, Bismuth shielding boards are often being used to reduce exposure to superficial organs such as the thyroid. However, beam hardening often occurs near superficial organs with Bismuth shielding boards and variations in CT Number, Noise, and Uniformity values occur severely. This study looked into the usefulness of shielding boards made from aluminum and silicone that can be easily obtained and have good machinability by comparing them to the existing Bismuth shielding board. An Aluminum 7.3mm and a Silicone 21.5mm were made with shielding ratios similar to that of the Bismuth(0.06 mmPb). TLD (TLD-100) was placed on the thyroid area of the Phantom (RS-108T) and 5 doses were measured for each. To compare image quality, CT Number and Noise variations in axial images of the thyroid area in Neck CT images were compared. Also, variations in CT Number, Noise, and Uniformity were measured in the AAPM phantom images and compared. In the results, when thyroid doses for each shielding board were compared, the Bismuth shielding board showed a 14% reduction, the Silicone 21.5mm showed a 15% reduction, and the Aluminum 7.3mm showed a 13% reduction compared to the Non-Shield. Statistically, there were no significant differences in comparison with the Bismuth shielding board. In CT Number variations of thyroid area images, variations were largest for the Bismuth shielding board. With Uniformity evaluations of the AAPM phantom, the Bismuth shielding board was found unsuitable and the Aluminum 7.3mm and Silicone 21.5mm satisfied the acceptance criteria. Research results show that the Aluminum 7.3mm and Silicone 21.5mm have a similar shielding ratio to the high-priced Bismuth shielding board that is currently being used clinically and in comparison tests of CT Number attenuation coefficient variations, Noise, and Uniformity which are phantom image evaluation items, they proved to be better than Bismuth shielding boards. If various shielding boards are made using aluminum and silicone, sized appropriately for superficial organs, it would be useful in decreasing patient doses.